Audi RNS-E

[kikikis2001]

Could Somebody make calculation for Audi RNS-E Navigation? How much does it cost? What should I send (dump, photo of original label, VIN)? Mayby Somebody have calculator for Audi&VW navi radios? Best regards.

[AMINE T-E]

Only from dump :)

[kikikis2001]

Do You know Somebody who can read it from dump and how much does it cost? Regards.

[AMINE T-E]

Cost, we dont like do business on that forum :D so dont tell here how much it cost !

Ok give us more information about that radio, model part number ...etc

[STT]

NAVIGATION PLUS RNS-E , produced by AISIN AW
Must be have special programmer for read Flash for decode this unit ;)

[kikikis2001]

Which programmer are You talking about (UPA)? Which eeprom should be read? Could You explain better? Best regards.

[youssef70]

NAVIGATION PLUS RNS-E , produced by AISIN AW
Must be have special programmer for read Flash for decode this unit ;)

Which programmer are You talking about (UPA)? Which eeprom should be read? Could You explain better? Best regards.


if FLASH as said must you have a good programmer i mean universel one ....
i think UPA cant do it !!!!

[kikikis2001]

I think UPA is universal. It works with all flash. I know that Beeprog or Xeltek is better, but cost much more. But You don't write which flash (eeprom) do You mean before? Where is it and what exactly kind of memory it is? Best regards.

[AMINE T-E]

I think UPA is universal. It works with all flash. I know that Beeprog or Xeltek is better, but cost much more. But You don't write which flash (eeprom) do You mean before? Where is it and what exactly kind of memory it is? Best regards.

Who told you that UPA can do flash ?
Wrong info !

[kikikis2001]

I found http://www.macraigor.com/cpus.htm and Program Flash programmer. You think that that solution is good? But I don't know which processor is in RNS-E Navi? What should I flash? Regards.

[STT]

Open radio and look who have inside .
Must be have two flashes MBM29XL12DF , code in one from this chips.
In this moment only BEEPROG from Elnec, work correctly with this flash.

[kikikis2001]

Not only Beeprog. Check also http://www.weilei.pl/listy/list480.htm.
Programmer VP-480 or VP-990 plus special adapter. Best regards and thanks.

[STT]

Ok , no problem friend.
I no know this programmer from before.
If you have this just work :)

[kikikis2001]

Thank You also:)

[7Hex4]

Please look at mcu and write down the numbers; post here, we will try to help you.

BR

[tigre]

but what falsh have code and adress line?
thanks

[branco]

you have to get flash with known code
:)

[STT]

but what falsh have code and adress line?
thanks

You have programmer for reading this flash ??? :cool:

[tigre]

You have programmer for reading this flash ??? :cool:

no, i dont have, but im trying search a way to read flash

[tigre]

no, i dont have, but im trying search a way to read flash

i already know where is the code in flash, my problem is that i cant read flash because i dont have socket to beeprog, i know if is possible read directly without beeprog but i dont know how :(

[eLAB]

Not only Beeprog. Check also .
Programmer VP-480 or VP-990 plus special adapter. Best regards and thanks.

Yes, I analyzing Wellon programmers about 8 months (and decided,VP990 ordered before 10 days :) )...actually, You don`t need special adapter, please see attach ;)

Just make it.

Also, adapters is universal...

WBR
Dejan.

[wyz1056]

how much money? tool

[eLAB]

how much money? tool

Hi,

please visit this link and check prices: www.programatory.com

In left bottom corner of web page, You can switch on english page, and also to change shown prices from polish zlots in euros.


Best regards,
Dejan.

[kikikis2001]

Hello, I've found that if You read flash 16MB Fujitsu MBM 29Xl12DF, You will find code which is "open" - not crypted - on the end of the flash. But mayby Somebody find calculator for RNS-E (PIN from VIN)? I would like to get it:) Best regards.