Tlemcen Car electronics - Afficher un message

ANDIR · 08/06/2016, 16h17

Sorry forgot to mention

the 2.2dci was an A/T
did not use enginebay ECU and A/T shifter

when i used the new ECUs andpressed START red LED was blinkin
perhaps it was because the A/T shifter was not present and it did not read it in the P position

also with the new wiring the headlamps don't work (the 2.2 had xenon, did not change the headlamp wiring yet and so the old ones are still on)

08/06/2016, 16h17	#2
ANDIR Membre Non Confirmé Date d'inscription: juin 2016 Localisation: Romania, Bucharest Âge: 41 Messages: 3 Thanks: 0 Thanked 3 Times in 1 Post Pouvoir de réputation: 0	Sorry forgot to mention the 2.2dci was an A/T did not use enginebay ECU and A/T shifter when i used the new ECUs andpressed START red LED was blinkin perhaps it was because the A/T shifter was not present and it did not read it in the P position also with the new wiring the headlamps don't work (the 2.2 had xenon, did not change the headlamp wiring yet and so the old ones are still on)