Tlemcen Car electronics  

Précédent   Tlemcen Car electronics > Outils & Diag > Outils de diagnostique > LEXIA, PP2000, DiagBox

VF2
Réponse
 
Outils de la discussion
Vieux 13/01/2012, 06h22   #1
scarymistake
V.I.P
 
Avatar de scarymistake
 
Date d'inscription: janvier 2012
Localisation: now
Messages: 41
Thanks: 15
Thanked 887 Times in 38 Posts
Pouvoir de réputation: 0
scarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud of
Smile Update DiagBox WITHOUT Internet! V6.41

Citation:
POST MIS A JOUR LE 20/09/2012
LAST UPDATED 09.20.2012
DIAGBOX V6.01

If you want to use diagbox version 6. with a clone interface you need to let him be re-flashed (ask me in PM)


************************************************** ************************

Videos Instructions

Code:
Install DiagBox V6.35
http://www.youtube.com/watch?v=So2MSgEO2fQ

Code:
Install DiagBox V6.01
http://www.youtube.com/watch?v=VYTCIFP75J8

Code:
Update DiagBox V6
http://www.youtube.com/watch?v=qFXYK-FEgGY

Code:
Change Profile DiagBox
http://www.youtube.com/watch?v=3im0icr9qOg
..................................
Fichiers attachés
Type de fichier : txt Rar and install CODE.txt (187 octets, 729 affichages)
Type de fichier : rar Update DiagBox 6.41 Mega.rar (15,4 Ko, 502 affichages)

Dernière modification par scarymistake ; 27/03/2013 à 08h36. Motif: Update of Scary V6.41
scarymistake est déconnecté   Réponse avec citation
The Following 120 Users Say Thank You to scarymistake For This Useful Post:
0160doudou (08/04/2013), adiago (13/01/2012), al1962 (02/02/2014), alpha2302 (19/11/2012), amadachee (18/05/2012), amar (10/06/2012), Amine-TE (13/01/2012), amoss (10/09/2012), Ardamour (11/10/2013), AUR13 (16/08/2012), Auto-Diag (27/02/2012), Auto16 (20/04/2012), autodiagauto (17/11/2012), ay2sa (13/01/2012), BARY42 (23/01/2012), bej 974 (28/11/2018), benaknoun (20/10/2012), c6 saf (17/11/2012), C8exclusive (07/01/2013), Carsshop (16/01/2012), cedrsan (14/01/2012), cotymoto (18/09/2012), crapouillot (01/02/2012), ctophe33 (14/08/2013), devildante007 (19/01/2012), DIAGAUTO33 (23/01/2012), diago2001 (06/08/2013), digicar (17/12/2012), dreamland (05/01/2013), eobd-scan92 (05/02/2012), estwood68 (17/10/2019), FACOM (16/07/2012), fakhri (04/05/2013), fedge (11/09/2012), FMTS (29/04/2013), franz93 (29/12/2012), freakmind (26/11/2014), freeman2010 (11/02/2013), fufounet (24/01/2012), galinouz (06/09/2012), garageducentre (19/01/2014), gepy (11/10/2012), Geri (21/01/2013), guyvdp (27/02/2013), hugoboss25 (04/09/2012), ikbal031 (01/06/2013), invisiblesok (19/01/2015), izi (04/09/2012), j-sky (12/02/2012), JESUSNAMASTE (24/04/2013), JOE (01/04/2012), jonathas_procopio (04/11/2013), jonathmann (03/04/2013), jp59 (18/11/2019), kakou28 (14/04/2014), kam306 (29/04/2012), kengmg (03/03/2012), kt12816 (01/05/2013), lagaloches (16/07/2012), land2a (01/01/2014), lari95400 (11/02/2012), Lotcogs (08/06/2021), m@x (14/12/2014), macgil59 (19/07/2014), Marre (29/12/2013), MCNexo94 (10/07/2012), mecanodiag93 (09/11/2012), MecaTech (27/10/2013), menzoulou (08/06/2013), milas (10/11/2012), mirek (11/08/2013), mohhizbar (25/04/2014), momo28 (13/10/2012), morgiee (13/05/2013), mostfa (18/06/2013), motard_21130 (25/08/2012), mustaphcl (17/06/2014), Nacho25 (29/04/2014), nany (25/07/2012), NEO (26/08/2013), newvo (05/02/2012), panos (28/09/2013), pat6440 (17/11/2012), pierre6969 (14/02/2013), pif78 (15/05/2012), pimo (13/01/2012), piwis59 (13/07/2012), ptitom33 (13/01/2012), rabahclim (19/12/2012), RAHMANIA AMMAR (19/12/2013), ramaz (13/01/2012), reda75 (19/01/2012), Repzile (19/03/2012), RIMKACHIP (05/11/2012), ripp2003 (11/07/2014), sam69 (03/05/2012), sardan (20/04/2015), Scanworld2020 (27/07/2012), sid-ahmed (13/03/2012), simo84 (30/09/2013), smainoran (26/10/2012), sosauto (04/10/2012), stofa-25 (08/11/2012), sylvain02120 (24/01/2013), taherpes (15/05/2013), taz22 (24/10/2012), therocks (13/01/2012), timelin00 (06/12/2013), tortu25 (01/12/2012), TR-DELIGHT (21/11/2012), twisterelectro (27/06/2014), vince06 (10/12/2019), virus44 (09/02/2013), vortex (17/03/2014), waile01 (30/01/2012), WebBeat (16/07/2013), xp0098 (09/10/2013), yassinallioui (04/05/2014), youcef_trik (09/02/2013), zbilou60 (11/03/2012)
Vieux 13/01/2012, 19h59   #2
pimo
Membre accro
 
Avatar de pimo
 
Date d'inscription: octobre 2009
Localisation: france st auges
Messages: 1 348
Thanks: 612
Thanked 1 560 Times in 703 Posts
Pouvoir de réputation: 30
pimo has much to be proud ofpimo has much to be proud ofpimo has much to be proud ofpimo has much to be proud ofpimo has much to be proud ofpimo has much to be proud ofpimo has much to be proud ofpimo has much to be proud ofpimo has much to be proud ofpimo has much to be proud of
Par défaut

grand merci a scarymistake qui maintenant viens sur tlemcen.
pour ton boulot sur l'interface et les mises a jours reguliaire du diagbox.

sorry for my english
big thank you to the scarymistake which now come in Tlemcen.
for your job on the interface and the updates of reguliaire diagbox.

Dernière modification par cedrsan ; 19/02/2012 à 13h42.
pimo est déconnecté   Réponse avec citation
The Following 11 Users Say Thank You to pimo For This Useful Post:
adiago (13/01/2012), FACOM (16/07/2012), Geri (03/01/2013), kam306 (19/01/2012), MCNexo94 (10/07/2012), mecanodiag93 (20/12/2012), MecaTech (27/10/2013), momo28 (05/02/2012), pif78 (15/05/2012), ramaz (30/03/2012), scarymistake (14/01/2012)
Vieux 19/01/2012, 13h48   #3
cedrsan
Moderateur
 
Avatar de cedrsan
 
Date d'inscription: décembre 2011
Localisation: France
Messages: 1 919
Thanks: 1 810
Thanked 12 693 Times in 1 601 Posts
Pouvoir de réputation: 179
cedrsan has a reputation beyond reputecedrsan has a reputation beyond reputecedrsan has a reputation beyond reputecedrsan has a reputation beyond reputecedrsan has a reputation beyond reputecedrsan has a reputation beyond reputecedrsan has a reputation beyond reputecedrsan has a reputation beyond reputecedrsan has a reputation beyond reputecedrsan has a reputation beyond reputecedrsan has a reputation beyond repute
Wink

Hello,

Post épinglé ;)

(@scarymistake : just ask to sticky your topic ;) )

++
ced

Dernière modification par cedrsan ; 15/04/2012 à 15h23.
cedrsan est déconnecté   Réponse avec citation
The Following 9 Users Say Thank You to cedrsan For This Useful Post:
adiago (19/01/2012), Amine-TE (19/01/2012), mecanodiag93 (12/02/2013), MecaTech (27/10/2013), momo28 (05/02/2012), pif78 (15/05/2012), scarymistake (22/01/2012), therocks (19/01/2012), zbilou60 (24/03/2012)
Vieux 04/05/2012, 16h48   #4
fragamine
Membre Non Confirmé
 
Avatar de fragamine
 
Date d'inscription: juin 2011
Localisation: Nantes
Âge: 36
Messages: 6
Thanks: 6
Thanked 1 Time in 1 Post
Pouvoir de réputation: 0
fragamine is an unknown quantity at this point
Par défaut

Hello to Scarymistake i read you so many times in mh... and have one question to you because i'v not found one post and answer of the solution. i'v install diagbox 6.01 and i'v a clone chine interface, i know that it's not running with it. I know that i must to reflash the eeprom to downgrade the FM, other solution if i understand is than use diagbox5.3 update the interface, disable the auto update diagbox and maybe run it ? So if you know other solution or process i'm so interresing.
Thank you
Regard Amine
fragamine est déconnecté   Réponse avec citation
Vieux 05/05/2012, 07h47   #5
scarymistake
V.I.P
 
Avatar de scarymistake
 
Date d'inscription: janvier 2012
Localisation: now
Messages: 41
Thanks: 15
Thanked 887 Times in 38 Posts
Pouvoir de réputation: 0
scarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud of
Par défaut

Citation:
Envoyé par fragamine Voir le message
Hello to Scarymistake i read you so many times in mh... and have one question to you because i'v not found one post and answer of the solution. i'v install diagbox 6.01 and i'v a clone chine interface, i know that it's not running with it. I know that i must to reflash the eeprom to downgrade the FM, other solution if i understand is than use diagbox5.3 update the interface, disable the auto update diagbox and maybe run it ? So if you know other solution or process i'm so interresing.
Thank you
Regard Amine
No only re-flash i now working good

I can do it for you

bestr.
scary
scarymistake est déconnecté   Réponse avec citation
Vieux 09/07/2012, 12h51   #6
MCNexo94
Membre accro
 
Avatar de MCNexo94
 
Date d'inscription: mars 2009
Localisation: France, Val2Marne
Messages: 1 493
Thanks: 845
Thanked 730 Times in 441 Posts
Pouvoir de réputation: 25
MCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to behold
Par défaut

Bonjour j'ai installer
DiagBox v6.01 avec le patch d activation etc tous fonctione niquel par contre j'ai voulu
mettre a jour en v6.17 en ligne apres avoir redemarrer le soft il a don c mis a jour mon DiagBox il me demande maintenant une activation mais quand je rentre le code client
1234567 et le profil 02FFFFFF et la clé ACTIVATION 12345678901234567890123456789011 lors de la validation il me marque ERREUR 11 comme si la clé ne fonctionner pas j'ai tester egalment en re uttilisant le PaTCH ca fait la meme chose.
Je precise que j'ai une interface ORIGINALE et non un CLONE...

Merci de votre aide.

Je vous joint les impression ecrans si ca peut vous aidée ;)
Au Faite dans la mise a jour v6.17 y'a une rubrique MULTIDIAG par contre pour la lancer il demande de mettre le DVD a fin de l'installer si j'installe le MuLTIDIAG 2012 je pourrais le lancer a partir de diagbox ? mais avec mon interface ACTIA Bluetooth ou avec celle de PSA ???

Merci au EXPERT en PSA ;)
Images attachées
Type de fichier : jpg Activation Peugeot.jpg (82,1 Ko, 61 affichages)
Type de fichier : jpg Erreur Diag.jpg (81,7 Ko, 48 affichages)

Dernière modification par cedrsan ; 24/12/2013 à 00h39.
MCNexo94 est déconnecté   Réponse avec citation
Vieux 12/07/2012, 19h02   #7
ramaz
Membre attaché
 
Avatar de ramaz
 
Date d'inscription: avril 2009
Localisation: france/Toulouse
Messages: 320
Thanks: 234
Thanked 344 Times in 101 Posts
Pouvoir de réputation: 16
ramaz will become famous soon enoughramaz will become famous soon enough
Par défaut

penses à mettre un avatar alnkike

les drivers sont prévus pour xp pro 32bits seulement !!
__________________
thanks avant mot de passe !
ramaz est déconnecté   Réponse avec citation
Vieux 15/07/2012, 22h09   #8
MCNexo94
Membre accro
 
Avatar de MCNexo94
 
Date d'inscription: mars 2009
Localisation: France, Val2Marne
Messages: 1 493
Thanks: 845
Thanked 730 Times in 441 Posts
Pouvoir de réputation: 25
MCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to behold
Par défaut

Bonjour ok
je vais mettre a jour mon diagbox v6.01 avec la maj v6.18.
Simple question pour avoir toutes les mises a jour faut il installer a la suite v6.01 V6.02 V6.03 ou peut on passer directement a la v6.18 est avoir toutes les mises a jour inclus ???

MERCI

ENGLISH /

Hello ok
I will update my diagbox v6.01 with v6.18 maj.
Simple question for all updates must install it as a result V6.02 V6.03 or v6.01 you can go directly to the v6.18 is to have all the updates included??

THANKS
MCNexo94 est déconnecté   Réponse avec citation
Vieux 16/07/2012, 06h25   #9
scarymistake
V.I.P
 
Avatar de scarymistake
 
Date d'inscription: janvier 2012
Localisation: now
Messages: 41
Thanks: 15
Thanked 887 Times in 38 Posts
Pouvoir de réputation: 0
scarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud ofscarymistake has much to be proud of
Par défaut Update

Citation:
Envoyé par MCNexo94 Voir le message
Bonjour ok
je vais mettre a jour mon diagbox v6.01 avec la maj v6.18.
Simple question pour avoir toutes les mises a jour faut il installer a la suite v6.01 V6.02 V6.03 ou peut on passer directement a la v6.18 est avoir toutes les mises a jour inclus ???

MERCI

ENGLISH /

Hello ok
I will update my diagbox v6.01 with v6.18 maj.
Simple question for all updates must install it as a result V6.02 V6.03 or v6.01 you can go directly to the v6.18 is to have all the updates included??

THANKS
You can directly from V6.01 to V6.18
No problem (only the clone interface is a problem)

bestr.
scary
scarymistake est déconnecté   Réponse avec citation
The Following 4 Users Say Thank You to scarymistake For This Useful Post:
benaknoun (20/10/2012), MCNexo94 (16/07/2012), MecaTech (27/10/2013), ramaz (16/07/2012)
Vieux 16/07/2012, 11h51   #10
MCNexo94
Membre accro
 
Avatar de MCNexo94
 
Date d'inscription: mars 2009
Localisation: France, Val2Marne
Messages: 1 493
Thanks: 845
Thanked 730 Times in 441 Posts
Pouvoir de réputation: 25
MCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to behold
Par défaut

no problem i have original interface ;)
Thank you for all

I'am test in my computer used Windows 7
I have message the update is not terminet succes reboot the soft is normale ???
or no compatibel windows7.
It's necessary use Windows XP ?

Thanks

Dernière modification par cedrsan ; 24/12/2013 à 00h39.
MCNexo94 est déconnecté   Réponse avec citation
Vieux 16/07/2012, 12h47   #11
ramaz
Membre attaché
 
Avatar de ramaz
 
Date d'inscription: avril 2009
Localisation: france/Toulouse
Messages: 320
Thanks: 234
Thanked 344 Times in 101 Posts
Pouvoir de réputation: 16
ramaz will become famous soon enoughramaz will become famous soon enough
Par défaut

necessary use Windows XP !!!
or
windows 7 x86(32bits)
__________________
thanks avant mot de passe !
ramaz est déconnecté   Réponse avec citation
Vieux 16/07/2012, 15h06   #12
MCNexo94
Membre accro
 
Avatar de MCNexo94
 
Date d'inscription: mars 2009
Localisation: France, Val2Marne
Messages: 1 493
Thanks: 845
Thanked 730 Times in 441 Posts
Pouvoir de réputation: 25
MCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to beholdMCNexo94 is a splendid one to behold
Par défaut

J'ai tester sur Windows 7 en 32Bits
la version 6.01 fonctionner bien par contre une fois installer la mise a jour v6.18
une fois que je lance DiagBox il me marque veuillez patienter pendent la prise en charge de la mise a jour internet donc ce qui est normale une fois fini il me marque erreur le processus ne sait pas derouler avec sucée veuillez réesayer ou contacter votre revendeur.
Donc la je suis en train de re installer XP PRo et je vais tous re commancer mais je pense que le probleme vient de la Mise a jour v6.18.

;)
MCNexo94 est déconnecté   Réponse avec citation
The Following User Says Thank You to MCNexo94 For This Useful Post:
shami (26/07/2012)
Vieux 17/07/2012, 09h25   #13
Scanworld2020
Membre attaché
 
Avatar de Scanworld2020
 
Date d'inscription: août 2009
Localisation: Algerie, Boumerdes
Messages: 246
Thanks: 1 032
Thanked 1 429 Times in 124 Posts
Pouvoir de réputation: 32
Scanworld2020 has a brilliant futureScanworld2020 has a brilliant futureScanworld2020 has a brilliant futureScanworld2020 has a brilliant futureScanworld2020 has a brilliant futureScanworld2020 has a brilliant futureScanworld2020 has a brilliant futureScanworld2020 has a brilliant futureScanworld2020 has a brilliant futureScanworld2020 has a brilliant futureScanworld2020 has a brilliant future
Par défaut

j'ai installé la version 601 et sa fonctionne trii bien, mais quand j'ai lancé la mise a jour 6.18 j'ai recu ce message (if you both this free update from ebay or anyone else then you have been robbed ) et quand je clique sur valider le programme se ferme.
Scanworld2020 est déconnecté   Réponse avec citation
Vieux 17/07/2012, 18h05   #14
kalash
Débutant T-E
 
Avatar de kalash
 
Date d'inscription: juin 2011
Localisation: france
Messages: 40
Thanks: 34
Thanked 21 Times in 12 Posts
Pouvoir de réputation: 0
kalash is on a distinguished road
Par défaut

Citation:
Envoyé par MCNexo94 Voir le message
J'ai tester sur Windows 7 en 32Bits
la version 6.01 fonctionner bien par contre une fois installer la mise a jour v6.18
une fois que je lance DiagBox il me marque veuillez patienter pendent la prise en charge de la mise a jour internet donc ce qui est normale une fois fini il me marque erreur le processus ne sait pas derouler avec sucée veuillez réesayer ou contacter votre revendeur.
Donc la je suis en train de re installer XP PRo et je vais tous re commancer mais je pense que le probleme vient de la Mise a jour v6.18.

;)

la solution avec se type de message est relancer la mise a jour ....
kalash est déconnecté   Réponse avec citation
The Following 2 Users Say Thank You to kalash For This Useful Post:
DRONX81 (28/03/2014), ramaz (20/07/2012)
Vieux 17/07/2012, 22h45   #15
RISC
Membre habitué T-E
 
Avatar de RISC
 
Date d'inscription: octobre 2009
Localisation: France, Pau
Messages: 127
Thanks: 72
Thanked 750 Times in 82 Posts
Pouvoir de réputation: 22
RISC is a splendid one to beholdRISC is a splendid one to beholdRISC is a splendid one to beholdRISC is a splendid one to beholdRISC is a splendid one to beholdRISC is a splendid one to beholdRISC is a splendid one to behold
Par défaut

Semble fonctionner avec WIN7 32bits
Citation:
Envoyé par MCNexo94 Voir le message
J'ai tester sur Windows 7 en 32Bits
la version 6.01 fonctionner bien par contre une fois installer la mise a jour v6.18
une fois que je lance DiagBox il me marque veuillez patienter pendent la prise en charge de la mise a jour internet donc ce qui est normale une fois fini il me marque erreur le processus ne sait pas derouler avec sucée veuillez réesayer ou contacter votre revendeur.
Donc la je suis en train de re installer XP PRo et je vais tous re commancer mais je pense que le probleme vient de la Mise a jour v6.18.

;)
RISC est déconnecté   Réponse avec citation
The Following User Says Thank You to RISC For This Useful Post:
ramaz (18/07/2012)
Sponsored Link
Réponse

Liens sociaux

Outils de la discussion

Règles de messages
Vous ne pouvez pas créer de nouvelles discussions
Vous ne pouvez pas envoyer des réponses
Vous ne pouvez pas envoyer des pièces jointes
Vous ne pouvez pas modifier vos messages

Les balises BB sont activées : oui
Les smileys sont activés : oui
La balise [IMG] est activée : oui
Le code HTML peut être employé : non

Navigation rapide

Discussions similaires
Discussion Auteur Forum Réponses Dernier message
Update PSA DiagBox WITHOUT Internet! V7.64 Allready PATCHED scarymistake LEXIA, PP2000, DiagBox 207 04/11/2022 22h27
Diagbox et connexion Internet h4ni LEXIA, PP2000, DiagBox 6 14/06/2013 20h16
Lexia and PP2000 update without internet scarymistake LEXIA, PP2000, DiagBox 0 14/01/2012 10h20
Lexia and PP2000 update without internet reda75 Peugeot, Citroën 4 28/09/2010 13h31
Lexia and PP2000 update without internet reda75 Peugeot, Citroën 2 06/09/2010 09h33


Fuseau horaire GMT +1. Il est actuellement 09h10.


Tlemcen-electronic.com ne tolère aucune des opérations illégales et ne prend pas en charge les responsabilités pour la perte de l'équipement utilisé.
Toutes discussion sur ce forum est à des fins expérimentales et éducatives seulement. Utilisez les informations fournis par les membres à vos propres risques.
Partenaires : Cars Review - DZSAT : Télévision Par Satellite,Médias,Fréquences,Card sharing.
- GSM-ALGERIE - [ Box & outils Gsm ] - Guide Algérie- Musique mp3 - Bled Music" - EcuServer - Immo off & virgin, airbag cleaner online - Rafplus.com le gratuit sur internet - presse algerie - OBDFR.COM, France Diag - Info Algerie - Le Portail de petites annonces en Algérie- Informastore - Boutique Informatique & Multimedia - mandataire auto - Annonces Algérie HexaShopping - ChipTuning professionnel express
Tlemcen-electronic © All right reserved