Tlemcen Car electronics  

Précédent   Tlemcen Car electronics > Categorie principale > Tutoriels

Tutoriels Tutoriels pour vous aider.

Banner mod-Files1
Réponse
 
Outils de la discussion
Vieux 14/01/2018, 15h57   #1
barthdu22
Membre trés attaché
 
Avatar de barthdu22
 
Date d'inscription: septembre 2009
Localisation: rennes
Messages: 929
Thanks: 491
Thanked 1 033 Times in 615 Posts
Pouvoir de réputation: 25
barthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud of
Par défaut Tuto Upgrade galletto VD300

Salut, voici un tuto pour upgrader un galletto VD300 en tool 0475 (comme fantomel)Upgrad GallettoV54VD300.rar
PASS par MP:lock1 :
barthdu22 est déconnecté   Réponse avec citation
The Following 47 Users Say Thank You to barthdu22 For This Useful Post:
Alessiapia14 (25/03/2018), alexvin (04/03/2018), amine08 (19/05/2018), autodiagauto (15/01/2018), ayoub3030 (03/12/2021), aza (25/01/2018), babeloued48 (30/03/2018), boukrama (25/06/2019), caroptimum (15/01/2018), chave56 (18/02/2019), DIAGSYSTEM25 (20/01/2018), dounga (27/01/2018), ElTurco (25/06/2019), fedge (25/01/2018), fouad19764 (25/03/2018), fufounet (24/01/2018), ggvaniou (26/01/2018), guyguy307 (25/03/2018), infobadr (14/01/2018), jean-marc 10 (26/01/2018), kitopa (04/01/2020), licorne2 (22/10/2019), madrid31 (06/04/2018), medcapot (15/01/2018), mesa31 (23/08/2021), miloud_slt2014 (14/01/2018), mindouza (10/11/2018), MrSeat838231 (08/12/2019), nasisamy (27/01/2018), nounour10 (11/11/2019), Pelican (04/11/2019), poze (09/03/2021), rayad (19/10/2021), reda75 (14/01/2018), redou28 (14/01/2018), roilion007 (14/01/2018), samii1955 (16/07/2019), tariq1410 (14/01/2018), television (15/01/2018), Topal (13/08/2021), Truc (01/06/2018), vforce (06/04/2018), visio (06/04/2019), wscar (14/01/2018), xdols (27/04/2018), youcef_trik (14/01/2018), zatazk (04/02/2018)
Vieux 25/01/2018, 06h32   #2
fufounet
Membre accro
 
Avatar de fufounet
 
Date d'inscription: mai 2009
Localisation: france st etienne
Âge: 54
Messages: 1 797
Thanks: 915
Thanked 1 581 Times in 708 Posts
Pouvoir de réputation: 33
fufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant future
Par défaut

bonjour
est ce que ca peut etre fait au jtag?
merci
fufounet est déconnecté   Réponse avec citation
The Following User Says Thank You to fufounet For This Useful Post:
yano (27/06/2019)
Vieux 25/01/2018, 12h54   #3
barthdu22
Membre trés attaché
 
Avatar de barthdu22
 
Date d'inscription: septembre 2009
Localisation: rennes
Messages: 929
Thanks: 491
Thanked 1 033 Times in 615 Posts
Pouvoir de réputation: 25
barthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud of
Par défaut

Salut, il te faut une interface a moins de 5€ sur internet pour faire la mise a jour (interface pilotée par le logiciel philips)
barthdu22 est déconnecté   Réponse avec citation
Vieux 25/01/2018, 13h01   #4
DIAGSYSTEM25
Fidèle à T-E
 
Avatar de DIAGSYSTEM25
 
Date d'inscription: juin 2011
Localisation: HERICOURT
Messages: 2 986
Thanks: 3 235
Thanked 2 227 Times in 1 199 Posts
Pouvoir de réputation: 39
DIAGSYSTEM25 has a reputation beyond reputeDIAGSYSTEM25 has a reputation beyond reputeDIAGSYSTEM25 has a reputation beyond reputeDIAGSYSTEM25 has a reputation beyond reputeDIAGSYSTEM25 has a reputation beyond reputeDIAGSYSTEM25 has a reputation beyond reputeDIAGSYSTEM25 has a reputation beyond reputeDIAGSYSTEM25 has a reputation beyond reputeDIAGSYSTEM25 has a reputation beyond reputeDIAGSYSTEM25 has a reputation beyond reputeDIAGSYSTEM25 has a reputation beyond repute
Par défaut Galetto

Salut
J en ai acheté 5 et aucune ne fonctionne
Tu peux m envoyé un lien en mp stp
DIAGSYSTEM25 est déconnecté   Réponse avec citation
Vieux 25/01/2018, 14h49   #5
fufounet
Membre accro
 
Avatar de fufounet
 
Date d'inscription: mai 2009
Localisation: france st etienne
Âge: 54
Messages: 1 797
Thanks: 915
Thanked 1 581 Times in 708 Posts
Pouvoir de réputation: 33
fufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant future
Par défaut

j ai regardé on peut avec un jlink
j en ai un c est pour ca.....
j avais reflashé mon autocom et mon carprog avec
fufounet est déconnecté   Réponse avec citation
Vieux 26/01/2018, 13h05   #6
fufounet
Membre accro
 
Avatar de fufounet
 
Date d'inscription: mai 2009
Localisation: france st etienne
Âge: 54
Messages: 1 797
Thanks: 915
Thanked 1 581 Times in 708 Posts
Pouvoir de réputation: 33
fufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant future
Par défaut

salut barthdu22
sur ton tuto
j ai vu que tu connectes que rx tx et ground...
y a pas un +vcc quelque part?
ou alors tui connectes le fgetch en usb?
merci
fufounet est déconnecté   Réponse avec citation
Vieux 26/01/2018, 18h12   #7
barthdu22
Membre trés attaché
 
Avatar de barthdu22
 
Date d'inscription: septembre 2009
Localisation: rennes
Messages: 929
Thanks: 491
Thanked 1 033 Times in 615 Posts
Pouvoir de réputation: 25
barthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud ofbarthdu22 has much to be proud of
Par défaut

Salut, oui je connecte le fgtech en usb
J'utilise bien que rx, tx et grnd
barthdu22 est déconnecté   Réponse avec citation
The Following User Says Thank You to barthdu22 For This Useful Post:
DIAGSYSTEM25 (26/01/2018)
Vieux 26/01/2018, 21h01   #8
fufounet
Membre accro
 
Avatar de fufounet
 
Date d'inscription: mai 2009
Localisation: france st etienne
Âge: 54
Messages: 1 797
Thanks: 915
Thanked 1 581 Times in 708 Posts
Pouvoir de réputation: 33
fufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant future
Par défaut

bonsoir
quelqu un peut me dire a quoi correspond le rx et tx
sur le connecteur du jlink?
voici le pinout du jlink
Images attachées
Type de fichier : png J-Link_2mm_Adapter_Pinout.png (1,9 Ko, 45 affichages)
fufounet est déconnecté   Réponse avec citation
Vieux 24/03/2018, 22h58   #9
caroptimum
Membre habitué T-E
 
Avatar de caroptimum
 
Date d'inscription: janvier 2013
Localisation: France Clermont Fd
Messages: 141
Thanks: 252
Thanked 152 Times in 60 Posts
Pouvoir de réputation: 14
caroptimum has a spectacular aura aboutcaroptimum has a spectacular aura aboutcaroptimum has a spectacular aura about
Par défaut

Au tuto de Barth, je rajouterai (Inversion de deux étapes)
Dans un premier temps et après installation du win 0475
Désinstaller le driver de l'interface FGTECH si elle est reconnu dans le gestionnaire périphérique
La réinstaller manuellement avec le chemin du repertoire "Driver interfacia"
S'assurer qu'elle est parfaitement installé

Ensuite appliquer le patch 0475 en le dezippant dans le répertoire d'installation

---------- Post added at 22h58 ---------- Previous post was at 22h57 ----------

Sinon, super tuto. Mention trés bien pour le flashage. Encore merci
caroptimum est déconnecté   Réponse avec citation
Vieux 25/03/2018, 09h51   #10
guyguy307
T-E master
 
Avatar de guyguy307
 
Date d'inscription: mai 2016
Localisation: france toulouse
Âge: 40
Messages: 2 107
Thanks: 4 145
Thanked 2 589 Times in 1 152 Posts
Pouvoir de réputation: 38
guyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond repute
Par défaut

Salut

Auriez vous avez pinout jlink

Merci
__________________
La passion est un moteur dont personne ne mesure la puissance
guyguy307 est déconnecté   Réponse avec citation
Vieux 25/03/2018, 15h05   #11
ggvaniou
Genious T-E
 
Avatar de ggvaniou
 
Date d'inscription: juillet 2013
Localisation: reunion
Messages: 3 385
Thanks: 11 006
Thanked 6 250 Times in 2 351 Posts
Pouvoir de réputation: 81
ggvaniou has a reputation beyond reputeggvaniou has a reputation beyond reputeggvaniou has a reputation beyond reputeggvaniou has a reputation beyond reputeggvaniou has a reputation beyond reputeggvaniou has a reputation beyond reputeggvaniou has a reputation beyond reputeggvaniou has a reputation beyond reputeggvaniou has a reputation beyond reputeggvaniou has a reputation beyond reputeggvaniou has a reputation beyond repute
Par défaut

Slt
J ai un fgtech vd300 ,
Je l utilise avec le soft de fantommel depuis un an,ça a toujours fonctionner sur ed15,edc16,bdm,tricore et a aucun moment j ai eu besoin flashé mon fgtech...bizarre!!????
Le seul problème que j ai eu ,c est un pb au niveau des soudures du port usb....
__________________
Il ne faut jamais garder un pet a en soit, c'est de la que naissent les idées de Merde
ggvaniou est déconnecté   Réponse avec citation
The Following User Says Thank You to ggvaniou For This Useful Post:
autodiagauto (25/03/2018)
Vieux 06/04/2018, 14h50   #12
madrid31
Membre attaché
 
Avatar de madrid31
 
Date d'inscription: octobre 2017
Localisation: france,paris
Messages: 205
Thanks: 204
Thanked 62 Times in 31 Posts
Pouvoir de réputation: 7
madrid31 will become famous soon enough
Par défaut

merci pour le tuto je pourrais avoir le mdp stp
madrid31 est déconnecté   Réponse avec citation
Vieux 06/04/2018, 19h40   #13
maitresox
Membre trés attaché
 
Avatar de maitresox
 
Date d'inscription: décembre 2011
Localisation: France/Pays de Loire
Messages: 746
Thanks: 409
Thanked 3 751 Times in 401 Posts
Pouvoir de réputation: 66
maitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond reputemaitresox has a reputation beyond repute
Par défaut

Bonjour
Qu'est que cette maj apporte de plus ?
Tu peux expliquer plus clairement
Je te remercie
Maitresox
maitresox est déconnecté   Réponse avec citation
Vieux 01/06/2018, 06h55   #14
fufounet
Membre accro
 
Avatar de fufounet
 
Date d'inscription: mai 2009
Localisation: france st etienne
Âge: 54
Messages: 1 797
Thanks: 915
Thanked 1 581 Times in 708 Posts
Pouvoir de réputation: 33
fufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant futurefufounet has a brilliant future
Par défaut

bonour
j ai flashé mon fgtech o386 to 0475
maintenant j ai un probleme
le logiciel se lance
je suis obligé de debranché rebranché le fgtech pour qu il soit reconnu par le soft 0475
puis tout est grisé ensuite
je peut selectionner un driver
exmple edc16cc34 bdm
mais tout est grisé eeprom flash etc et aucune lecture.....
fufounet est déconnecté   Réponse avec citation
Vieux 25/06/2019, 20h01   #15
ElTurco
Membre accro
 
Avatar de ElTurco
 
Date d'inscription: novembre 2018
Localisation: France land
Messages: 1 011
Thanks: 4 788
Thanked 2 728 Times in 743 Posts
Pouvoir de réputation: 34
ElTurco has a reputation beyond reputeElTurco has a reputation beyond reputeElTurco has a reputation beyond reputeElTurco has a reputation beyond reputeElTurco has a reputation beyond reputeElTurco has a reputation beyond reputeElTurco has a reputation beyond reputeElTurco has a reputation beyond reputeElTurco has a reputation beyond reputeElTurco has a reputation beyond reputeElTurco has a reputation beyond repute
Par défaut

Citation:
Envoyé par fufounet Voir le message
bonsoir
quelqu un peut me dire a quoi correspond le rx et tx
sur le connecteur du jlink?
voici le pinout du jlink
Salut fufounet

Je pense que tu à déjà réglé ton soucis, pour les futurs intéressés utilisant le jlink voici les pin RX et TX :

Jlink pin 5 = TX
Jlink pin 17 = RX

@+

---------- Post added at 20h01 ---------- Previous post was at 19h58 ----------

Citation:
Envoyé par barthdu22 Voir le message
Salut, voici un tuto pour upgrader un galletto VD300 en tool 0475 (comme fantomel)Pièce jointe 62343
PASS par MP:lock1 :
Salut et merci à barthdu22 pour la réalisation du tuto et le partage pour tous les membres, possédant le VD300 j'aimerais essayer la mise à niveau.

Je partagerais les résultats par la suite, Merci encore.

@+
__________________
"Ne pas faire aux autres ce que l'on ne veux pas que les autres te face"
ElTurco est déconnecté   Réponse avec citation
The Following 3 Users Say Thank You to ElTurco For This Useful Post:
autodiagauto (10/04/2020), Mook31 (25/06/2019), Pelican (25/06/2019)
Sponsored Link
Réponse

Liens sociaux

Outils de la discussion

Règles de messages
Vous ne pouvez pas créer de nouvelles discussions
Vous ne pouvez pas envoyer des réponses
Vous ne pouvez pas envoyer des pièces jointes
Vous ne pouvez pas modifier vos messages

Les balises BB sont activées : oui
Les smileys sont activés : oui
La balise [IMG] est activée : oui
Le code HTML peut être employé : non

Navigation rapide

Discussions similaires
Discussion Auteur Forum Réponses Dernier message
Tuto Boot mode EDC15C7 citroen fgtech galletto v54 by sebv54 sebv54 Tutoriels 7 19/01/2023 09h20
maj galletto 4 VD300 pcb v54+ rotax Flasheur de calculateur 13 14/01/2018 18h08
Tuto pour boot mode edc15c7 galletto v54 Mrnixdorf Tutoriels 0 23/04/2017 03h07
Upgrade Galletto V54 louis_38 Flasheur de calculateur 0 11/06/2016 02h14
tuto bdm galletto 2 la-will Chiptuning 14 28/08/2013 21h05


Fuseau horaire GMT +1. Il est actuellement 09h21.


Tlemcen-electronic.com ne tolère aucune des opérations illégales et ne prend pas en charge les responsabilités pour la perte de l'équipement utilisé.
Toutes discussion sur ce forum est à des fins expérimentales et éducatives seulement. Utilisez les informations fournis par les membres à vos propres risques.
Partenaires : Cars Review - DZSAT : Télévision Par Satellite,Médias,Fréquences,Card sharing.
- GSM-ALGERIE - [ Box & outils Gsm ] - Guide Algérie- Musique mp3 - Bled Music" - EcuServer - Immo off & virgin, airbag cleaner online - Rafplus.com le gratuit sur internet - presse algerie - OBDFR.COM, France Diag - Info Algerie - Le Portail de petites annonces en Algérie- Informastore - Boutique Informatique & Multimedia - mandataire auto - Annonces Algérie HexaShopping - ChipTuning professionnel express
Tlemcen-electronic © All right reserved