14/10/2014, 19h41 | #1 |
Membre trés attaché
Date d'inscription: octobre 2013
Localisation: france,val d oise
Âge: 39
Messages: 991
Thanks: 344
Thanked 481 Times in 255 Posts
Pouvoir de réputation: 25 |
vcds code acces
Bonsoir a tous je voulez savoir ou je pourrai trouver les code accès sécurité (fonction 16) des calculateur
merci |
The Following User Says Thank You to Verdun For This Useful Post: | COTECH00 (19/10/2014) |
14/10/2014, 20h00 | #2 | |
Patron de Garage
Date d'inscription: décembre 2013
Localisation: Bretagne
Messages: 6 385
Thanks: 4 374
Thanked 8 905 Times in 3 453 Posts
Pouvoir de réputation: 183 |
Citation:
Regarde ici : http://www.google.fr/search?site=&so....3.BqbM425aLcw Premier lien. A+
__________________
___________________________ www.123diagauto.com |
|
The Following 7 Users Say Thank You to diagnosis29 For This Useful Post: | diagprog (14/10/2014), electro_bordeaux1 (15/10/2014), ErrorBinary (14/10/2014), mbn30 (14/10/2014), msirdi-31 (09/01/2020), smail djounadi (31/01/2015), Verdun (14/10/2014) |
14/10/2014, 22h56 | #3 |
Membre trés attaché
Date d'inscription: octobre 2013
Localisation: france,val d oise
Âge: 39
Messages: 991
Thanks: 344
Thanked 481 Times in 255 Posts
Pouvoir de réputation: 25 |
merci j ai regarder mais je trouve pas exemple pour calculateur d airbag d une tiguan annee 2007 et calculateur airbag audi a3 2006
|
The Following User Says Thank You to Verdun For This Useful Post: | COTECH00 (19/10/2014) |
15/10/2014, 12h23 | #4 | |
Patron de Garage
Date d'inscription: décembre 2013
Localisation: Bretagne
Messages: 6 385
Thanks: 4 374
Thanked 8 905 Times in 3 453 Posts
Pouvoir de réputation: 183 |
Citation:
VW Tiguan (5N) Airbag VW10 Adaptation Used to deactivate individual airbag components (see repair manual for details). Basic Setting Seat Occupied Recognition Control Module (J706) If the Seat Occupied Recognition Control Module (J706) or the seat itself have been replaced, the basic setting has to be performed. [Select] [15 - Airbags] [Security Access - 16] Enter 10522, to enable the basic setting. [Do it!] [Basic Settings - 04] Group 001 [Go!] Activate the Basic Setting. [ON/OFF/Next] The reset has been performed. [Done, Go Back] [Close Controller, Go Back - 06] Special Procedures Seat Occupied Recognition Control Module (J706): Reset If a repair on the Seat Occupied Recognition has been performed, a reset has to be performed too. Prerequisites: Seat in normal position. Seat must NOT be occupied during the whole procedure. Seatbelt must NOT be plugged in. No faults in the system. Interior temperature must be between 0 °C and 37 °C (32 °F and 98 °F). [Select] [15 - Airbags] [Security Access - 16] Enter 10522, to enable the basic setting. [Do it!] [Adaptation - 10] Channel 000 [Read] [Save] [Done, Go Back] [Close Controller, Go Back - 06] Audi A3 (8P) Airbag 9.41 Seat Occupied Recognition Control Module (J706) If the Seat Occupied Recognition Control Module (J706) or the seat itself have been replaced, the basic setting has to be performed. [Select] [15 - Airbags] [Security Access - 16] Enter 30475, to enable the basic setting. If you are having problems performing this security access, contact us. [Do it!] [Basic Settings - 04] Group 001 [Go!] Activate the Basic Setting. [ON/OFF/Next] The reset has been performed. [Done, Go Back] [Close Controller, Go Back - 06] Special Procedures Seat Occupied Recognition Control Module (J706): Reset If a repair on the Seat Occupied Recognition has been performed, a reset has to be performed too. Prerequisites: Seat in normal position. Seat must NOT be occupied during the whole procedure. Seatbelt must NOT be plugged in. No faults in the system. Interior temperature must be between 0 °C and 37 °C (32 °F and 98 °F). [Select] [15 - Airbags] [Security Access - 16] Enter 30475, to enable the basic setting. If you are having problems performing this security access, contact us. [Do it!] [Adaptation - 10] Channel 000 [Read] [Save] [Done, Go Back] [Close Controller, Go Back - 06] source : http://wiki.ross-tech.com/wiki/index.php/Main_Page *
__________________
___________________________ www.123diagauto.com Dernière modification par diagnosis29 ; 15/10/2014 à 12h27. |
|
Sponsored Link |
Liens sociaux |
|
|
Discussions similaires | ||||
Discussion | Auteur | Forum | Réponses | Dernier message |
Code sécurité VCDS Audi A4 B8 | Breizhelec | Vw, Audi, Skoda, Seat, Bentley | 3 | 13/08/2016 15h28 |
Problème Code workshop vcds | weber | Réparation & Programmation des calculateurs | 1 | 29/04/2014 10h14 |
Code accès PP2000 ??? | MICHOU13 | LEXIA, PP2000, DiagBox | 3 | 05/02/2014 23h25 |
code d acces pour apprentissage cle | electro_bordeaux1 | programmation & synchronisation de clé | 17 | 06/01/2014 20h53 |