Lucas dcn2 citroen berlingo 1.9d

ROG3R · 10/04/2009, 21h12

hi
citroen berlingo 1.9d year 2006 LUCAS DCN2
my problem is this car have accident,and ecu broke.
and buy one used,and bsi and keys.but car not work,
put the machine does not diagnose, says connection corrupted.
I do not know what may be, the unit will be blocked?

Hafid_elec · 10/04/2009, 21h29

Check the wires, maybe a wire is cutted,

is the BSI, Key, ECU is same with the old one ?

ROG3R · 10/04/2009, 21h31

hi
yes i check the wires.
and nothing.

Hafid_elec · 10/04/2009, 21h34

i think problem is in your Bsi or Ecu :)
99% if wire connexion is ok ;)

ROG3R · 10/04/2009, 22h26

how resolv this problem?

spookie · 12/04/2009, 15h43

But you forgot to change the solenoid on the pump encoded.
It is a shielded solenoid valve,
you have 2 solutions :
-put a simple SOLENOID
and connected to a + contact after.

-recover the solenoid of the car where your taking the bsi and ecu

the best solution is to put a simple SOLENOID uncoded.

**ricards99** · 12/04/2009, 17h26

if all other systems works normaly then it's the best solution

ROG3R · 14/04/2009, 15h18

hi
if put immo off
does not solve the problem?

**ricards99** · 14/04/2009, 20h25

if the solenoid is bad then the problem is not resolved,

ROG3R · 14/04/2009, 20h30

I try to make the diagnosis with ECU injection and does not notice,says connection corrupted.

the problem is solenoid?
connection corrupted is solenoid?

**ricards99** · 14/04/2009, 20h44

no, had you verify the engine wires

ROG3R · 14/04/2009, 21h01

hi
i see wires and is good
today see not work lights average, and the engine of glass
I try to make the diagnosis with ECU injection and does not notice,says connection corrupted.

**ricards99** · 14/04/2009, 21h19

just an idea: disconnect the ABS and try to scan ecu

ROG3R · 14/04/2009, 21h21

ok
tomorrow i try
thank you

ROG3R · 20/04/2009, 21h37

hi
thank you all for help

now i see problem is wires broke.
now is possible immo of in this ecu
i read memorie 25080

10/04/2009, 21h12	#1
ROG3R Débutant T-E Date d'inscription: décembre 2008 Localisation: portugal city barcelos Âge: 42 Messages: 51 Thanks: 20 Thanked 3 Times in 2 Posts Pouvoir de réputation: 0	Lucas dcn2 citroen berlingo 1.9d hi citroen berlingo 1.9d year 2006 LUCAS DCN2 my problem is this car have accident,and ecu broke. and buy one used,and bsi and keys.but car not work, put the machine does not diagnose, says connection corrupted. I do not know what may be, the unit will be blocked?

Discussions similaires
Discussion	Auteur	Forum	Réponses	Dernier message
citroen c4	pinkiller33	programmation & synchronisation de clé	3	14/04/2009 08h40
Citroen C4 comment mettre l'immo off	didi_du_93000	Immobilizer dumps/solutions	10	15/03/2009 01h05
citroen jumper	pecirepi	Immobilizer dumps/solutions	2	20/02/2009 06h21

10/04/2009, 21h29	#2
Hafid_elec Membre Non Confirmé Date d'inscription: février 2009 Localisation: Algérie, Ghazaouet Âge: 43 Messages: 4 Thanks: 1 Thanked 2 Times in 2 Posts Pouvoir de réputation: 0	Check the wires, maybe a wire is cutted, is the BSI, Key, ECU is same with the old one ?

10/04/2009, 21h31	#3
ROG3R Débutant T-E Date d'inscription: décembre 2008 Localisation: portugal city barcelos Âge: 42 Messages: 51 Thanks: 20 Thanked 3 Times in 2 Posts Pouvoir de réputation: 0	hi yes i check the wires. and nothing.

10/04/2009, 21h34	#4
Hafid_elec Membre Non Confirmé Date d'inscription: février 2009 Localisation: Algérie, Ghazaouet Âge: 43 Messages: 4 Thanks: 1 Thanked 2 Times in 2 Posts Pouvoir de réputation: 0	i think problem is in your Bsi or Ecu :) 99% if wire connexion is ok ;)

10/04/2009, 22h26	#5
ROG3R Débutant T-E Date d'inscription: décembre 2008 Localisation: portugal city barcelos Âge: 42 Messages: 51 Thanks: 20 Thanked 3 Times in 2 Posts Pouvoir de réputation: 0	how resolv this problem?

12/04/2009, 15h43	#6
spookie Débutant T-E Date d'inscription: mars 2009 Localisation: france GPE Messages: 41 Thanks: 3 Thanked 6 Times in 6 Posts Pouvoir de réputation: 0	But you forgot to change the solenoid on the pump encoded. It is a shielded solenoid valve, you have 2 solutions : -put a simple SOLENOID and connected to a + contact after. -recover the solenoid of the car where your taking the bsi and ecu the best solution is to put a simple SOLENOID uncoded.

12/04/2009, 17h26	#7
ricards99 Moderateur Date d'inscription: décembre 2008 Localisation: algerie tizi ouzou Messages: 1 585 Thanks: 677 Thanked 1 990 Times in 771 Posts Pouvoir de réputation: 37	if all other systems works normaly then it's the best solution

14/04/2009, 15h18	#8
ROG3R Débutant T-E Date d'inscription: décembre 2008 Localisation: portugal city barcelos Âge: 42 Messages: 51 Thanks: 20 Thanked 3 Times in 2 Posts Pouvoir de réputation: 0	hi if put immo off does not solve the problem?

14/04/2009, 20h25	#9
ricards99 Moderateur Date d'inscription: décembre 2008 Localisation: algerie tizi ouzou Messages: 1 585 Thanks: 677 Thanked 1 990 Times in 771 Posts Pouvoir de réputation: 37	if the solenoid is bad then the problem is not resolved,

14/04/2009, 20h30	#10
ROG3R Débutant T-E Date d'inscription: décembre 2008 Localisation: portugal city barcelos Âge: 42 Messages: 51 Thanks: 20 Thanked 3 Times in 2 Posts Pouvoir de réputation: 0	I try to make the diagnosis with ECU injection and does not notice,says connection corrupted. the problem is solenoid? connection corrupted is solenoid?

14/04/2009, 20h44	#11
ricards99 Moderateur Date d'inscription: décembre 2008 Localisation: algerie tizi ouzou Messages: 1 585 Thanks: 677 Thanked 1 990 Times in 771 Posts Pouvoir de réputation: 37	no, had you verify the engine wires

14/04/2009, 21h01	#12
ROG3R Débutant T-E Date d'inscription: décembre 2008 Localisation: portugal city barcelos Âge: 42 Messages: 51 Thanks: 20 Thanked 3 Times in 2 Posts Pouvoir de réputation: 0	hi i see wires and is good today see not work lights average, and the engine of glass I try to make the diagnosis with ECU injection and does not notice,says connection corrupted.

14/04/2009, 21h19	#13
ricards99 Moderateur Date d'inscription: décembre 2008 Localisation: algerie tizi ouzou Messages: 1 585 Thanks: 677 Thanked 1 990 Times in 771 Posts Pouvoir de réputation: 37	just an idea: disconnect the ABS and try to scan ecu

14/04/2009, 21h21	#14
ROG3R Débutant T-E Date d'inscription: décembre 2008 Localisation: portugal city barcelos Âge: 42 Messages: 51 Thanks: 20 Thanked 3 Times in 2 Posts Pouvoir de réputation: 0	ok tomorrow i try thank you