Demande d aide pour clonage vgs 722.9 mercedes

ggvaniou · 24/03/2017, 19h13

Bonjour
Je cherche le pin out pour une vgs 722.9 de Mercedes,afin de lire les données et transfert dans un autre calculateur.
A parament c est possible avec bdm 100:
https://youtu.be/a8_0ULEq74w

Quelqu'un a t il plus d info svp?

BIZTeam Automotive · 19/05/2017, 21h28

That is our solution.

Its possible only if VGS1 (with MPC555)

VGS2 is Tricore TC1765
VGS3 is Tricore TC1766

For TC not possible cloning, because of OTP Area (same as EDC17)

Best way to solve VGS2 and VGS3 is:

Reset it first with:
MBCan
http://www.autodijagnostika.biz/prog...an-reset-tool/

After reset is done, you must check what is original version of Software 00xxxxxxx

Then you download CFF file from www.cff-database.com

And you flash new unit with xxxxxxxx_0001.cff file

Now you have new VGS
-reseted
-same software version

Next step put it into car, make personalization and activation.

If all ok, job done.

If not ok, variant coding must be made. (Variant: XYCC)

You need VGS-NAG2-ALL.CBF , load it to vediamo, connect to 7G then change coding.

To check correct variant coding you need to connect old 7G and read 4 variant coding letters.

Cheers

24/03/2017, 19h13	#1
ggvaniou Genious T-E Date d'inscription: juillet 2013 Localisation: reunion Messages: 3 388 Thanks: 11 010 Thanked 6 266 Times in 2 354 Posts Pouvoir de réputation: 81	Demande d aide pour clonage vgs 722.9 mercedes Bonjour Je cherche le pin out pour une vgs 722.9 de Mercedes,afin de lire les données et transfert dans un autre calculateur. A parament c est possible avec bdm 100: https://youtu.be/a8_0ULEq74w Quelqu'un a t il plus d info svp?

Discussions similaires
Discussion	Auteur	Forum	Réponses	Dernier message
demande d'aide pour DTC off (partiel)	mampita	Tuning	3	04/12/2016 12h24
demande d'aide mercedes 220cdi	amourh59	Mercedes Benz	9	08/05/2015 15h08
demande aide pour utilisation SBB	tony2552	Programmeur de clé	9	03/03/2015 10h56
demande d'aide pour un defap	technicien	Réparation & Programmation des calculateurs	15	23/04/2014 21h45
Demande aide pour bsi valeo 207	Powertaz	Peugeot, Citroën	8	01/02/2014 19h56

19/05/2017, 21h28	#2
BIZTeam Automotive Débutant Date d'inscription: mai 2017 Localisation: Croatia, Zagreb Âge: 38 Messages: 11 Thanks: 0 Thanked 3 Times in 2 Posts Pouvoir de réputation: 0	That is our solution. Its possible only if VGS1 (with MPC555) VGS2 is Tricore TC1765 VGS3 is Tricore TC1766 For TC not possible cloning, because of OTP Area (same as EDC17) Best way to solve VGS2 and VGS3 is: Reset it first with: MBCan http://www.autodijagnostika.biz/prog...an-reset-tool/ After reset is done, you must check what is original version of Software 00xxxxxxx Then you download CFF file from www.cff-database.com And you flash new unit with xxxxxxxx_0001.cff file Now you have new VGS -reseted -same software version Next step put it into car, make personalization and activation. If all ok, job done. If not ok, variant coding must be made. (Variant: XYCC) You need VGS-NAG2-ALL.CBF , load it to vediamo, connect to 7G then change coding. To check correct variant coding you need to connect old 7G and read 4 variant coding letters. Cheers