Peugeot 206 immo

[diagnosis29]

Envoyé par bangbong

It seems that PP2000 and Diagbox software can not be installed in the same PC, you did that? install them in different computer please, if your lexia-3 can not work,you can have a look at SVDI PSA

Hello bangbong ,

Please read the rules before posting

here : http://www.tlemcen-electronic.com/fo...ead.php?t=7622

Thank you in advance

Regards





*

[sauzee1]

Hi thanks for your reply but i did install them on separate computers the seller has now said that they will now send me a new VCI so hopefully that will sort the problem
Thanks

[sauzee1]

Well just to let you know the seller from Aliexpress waited till the payment protection expired then told me they would not send a replacement as it was a system fault (my laptop) and not the Vci.I have installed three separate versions in three laptops (diagbox 7.43 and 5.29 lexia 3.47 and pp2000)
and still no joy
I did get a connection to a 2004 Picasso 1.6hdi but only to the Bsi the cars i have tried are 2001 Peugeot 206 1.4,2002 Picasso 2.0hdi 2004 Picasso 1.6hdi
Peugeot 307 2.0hdi 2004 peugeot 206 1.4
Only one bit of connection and that was the Bsi i dont want to buy another one to find out the same result
If it was the way i have installed the software or something i have not activated or enabled would this cause the problems i have had with two machines
Thanks for any help

[teuton]

You do get the message that the interface is activated after installation is complete?

[sauzee1]

Envoyé par teuton

You do get the message that the interface is activated after installation is complete?

Hi Thanks the computer recognizes the interface i just get no communication with the ECU on any car i try
The first interface i bought i got the update with help from Mr nic and still no communication so i bought an interface with full Nec chips and 7 optucouplers which was more expensive and i still cant get it to work i have tried 3 separate laptops all with windows xp i would probably benefit from someone close by who has a working interface trying my one to see if it the way i have installed it or the interface its self
Thanks

[teuton]

O.k., got it You got all your interfaces from the same supplier?

[sauzee1]

No 2 different suppliers as the first one did not have a version c and only had second rate chips that is why i thought the first one wouldn't work because it was cheap £38 second one cost about £80 that is a full chip version c
I got the same result with both no communication to the ECU
Thanks

[teuton]

Well, it was just on one car one might think it`s related to the vehichle. But as you stae it is on a couple.... Hopefully you'll find someone close to you with a working unit to compare to, br.