AL4 Programming

[Simple]

Hi There,
Does any one know how to connect to the AL4 ECU?? and what is the tool needed.
Regards,, Simple.

[Simple]

The car has done 160000 km, and the AL4 is supposed to be maintenance free. I changed the transmission oil last night and it very dark.
Now the car shifts through the gears much smoother.

[sepptdi]

AL4 a un remplissage à vie. Fonctions Adapitive peuvent être réinitialisés

[Simple]

I have a generic Bluetooth OBDII adapter, I can reset codes using it. Is it possible to reset the Oil Change counter as well, using it?

[Mike H]

Envoyé par Simple

I have a generic Bluetooth OBDII adapter, I can reset codes using it. Is it possible to reset the Oil Change counter as well, using it?

You don't tell witch type of your car.
Here's a manual way to reset the counter of oil change for c2 or c3, but you can find another video if you have a different type

https://www.youtube.com/results?sear...eur+vidange+C2

Best regards
Michel

[Simple]

Sorry,
Having entered this data in may posts, I feel I have over done it, but then you are right.

Car: Citroen C8
Engine: 2.0 HDI
Gear: Automatic AL4

Regards, Simple.

[Simple]

Well, I have watched the attached video, it is about the engine oil. I need to reset the oil change counter for the Gearbox.

[Mike H]

Envoyé par Simple

Sorry,
Having entered this data in may posts, I feel I have over done it, but then you are right.

Car: Citroen C8
Engine: 2.0 HDI
Gear: Automatic AL4

Regards, Simple.

I found this post in french:

xxxxxxxxxxxxxxxxxxxxxxxxxxxx
They say that this reset must be done by Citroën themselves, or you must buy the interface to acces the reset option

Edit : lien vers d'autres forum auto interdit.

[Simple]

@ Mike H,
Thanks, the link has been removed. However, I think you may be referring to a Lexia 3 device. I have ordered one already and I hope to be able to do this.
Now I need a repository to download the ECU firmware so that I can update them.
Thanks again, Simple.

[Mike H]

Envoyé par Simple

@ Mike H,
Thanks, the link has been removed. However, I think you may be referring to a Lexia 3 device. I have ordered one already and I hope to be able to do this.
Now I need a repository to download the ECU firmware so that I can update them.
Thanks again, Simple.

Effectively, I don't remember this rule of the forum. I'll never put a direct line to another forum on an answer @diagnosis29

You're right for your answer, the only way to reset is an interface, like the Lexia.
I've seen that this problem often happens on an automatic C8.
At the begin, it's enough to turn off the engine, wait a few moment...
But later, you're in the problem. They also talk about E/V witch also can made a problem with this car

[Simple]

Currently I don't have a problem, but I wish to avoid having one. Hence the order of Lexia 3 tool.
By the way, it took me sometime to understand the difference between the various clones.