08/08/2018, 15h11 | #1 |
Membre habitué T-E
Date d'inscription: mai 2009
Localisation: Blida
Messages: 143
Thanks: 66
Thanked 63 Times in 53 Posts
Pouvoir de réputation: 15 |
lambda Off Peugeot 207 "Marelli IAW6LP" Plz
slt mes amies .
quelquan pour maidé a faire un lambda off sur une 207 peugeot marelli iaw 6lp ?
__________________
"MagicAutos " Blida Cité Ben Boulaid Batimen M |
08/08/2018, 20h29 | #2 |
Membre accro
Date d'inscription: mai 2013
Localisation: france paris
Messages: 1 448
Thanks: 1 714
Thanked 2 093 Times in 1 054 Posts
Pouvoir de réputation: 32 |
salut,
désolé si ça ne repond pas a ta question !! mais quel genre de défaut tu as sur cette 207 ?? pour vouloir faire du off ??? P0136 ?
__________________
tout vient à point à qui sait attendre. |
08/08/2018, 22h11 | #3 |
Membre accro
Date d'inscription: juin 2013
Localisation: France,occitanie
Messages: 1 217
Thanks: 1 118
Thanked 1 082 Times in 585 Posts
Pouvoir de réputation: 26 |
Slt lambdas off passe pas au contrôle au moin 1 qui marche sinon il passe pas là pollution
|
The Following User Says Thank You to techtronic1 For This Useful Post: | magic abdou (09/08/2018) |
09/08/2018, 09h59 | #4 | |
Membre habitué T-E
Date d'inscription: mai 2009
Localisation: Blida
Messages: 143
Thanks: 66
Thanked 63 Times in 53 Posts
Pouvoir de réputation: 15 |
Citation:
dsl pour le retard & jai le code p0132
__________________
"MagicAutos " Blida Cité Ben Boulaid Batimen M |
|
09/08/2018, 13h04 | #5 |
Membre accro
Date d'inscription: mars 2014
Localisation: allemagne duisburg
Âge: 37
Messages: 1 091
Thanks: 472
Thanked 781 Times in 338 Posts
Pouvoir de réputation: 35 |
salut magic abdou.
moi personellement quand je tombe sur les defaults de lambda dnc les etapes faire sont: essayer de controller la sonde lambda si ok donc essaye de changer les bougie et de netoyer ou remplacer la cat.si le defaut ne resol pas donc essayer de remplacer les bobines d allumage .si parceque quand le fonctionement des bobines d allumage et pas parfait donc la sonde lambda detecte la melange pas ok. la solution lambda off c est la derniere solution. bon courage
__________________
(Avec un peu d'efforts, tu seras capable de trouver tes erreurs) |
09/08/2018, 14h18 | #6 | |
Membre habitué T-E
Date d'inscription: mai 2009
Localisation: Blida
Messages: 143
Thanks: 66
Thanked 63 Times in 53 Posts
Pouvoir de réputation: 15 |
Citation:
__________________
"MagicAutos " Blida Cité Ben Boulaid Batimen M |
|
09/08/2018, 14h37 | #7 |
Membre accro
Date d'inscription: mars 2014
Localisation: allemagne duisburg
Âge: 37
Messages: 1 091
Thanks: 472
Thanked 781 Times in 338 Posts
Pouvoir de réputation: 35 |
|
The Following User Says Thank You to brahimlamgarbi For This Useful Post: | magic abdou (09/08/2018) |
12/08/2018, 09h55 | #8 |
Membre habitué T-E
Date d'inscription: mai 2009
Localisation: Zaragoza.Espagne
Âge: 49
Messages: 140
Thanks: 104
Thanked 12 Times in 11 Posts
Pouvoir de réputation: 15 |
Establishing diagnostic session with the selected unit...
Diagnostic channel is open - High Speed CAN bus. --- electronic control unit identification --- Functional Plan No: 9654596080 Manufacturer: Magneti Marelli Functional Product No: 9654596080 Software Index: 255.255 Diagnostic Index: M System: 02 Software edition: 06.02 Software signature: 86.59 Software reference: 9663380880 Manufactoring Date2: 1/2/2007 Programming Date: 1/2/2007 Reprogramming counter: 1 Locking of the ECU ECU not locked Immobiliser status Matched ECU Synchronisation status No problem detected --- read diagnostic trouble codes --- === Permanent fault. P0170: Richness regulation From : Local. Characterisation of the fault: Coherence === Permanent fault. P0132: Upstream oxygen sensor signal From : Local. Characterisation of the fault: Short circuit to positiveOpen circuit === Intermittent. P0012: Variable timing electrovalve From : Distant. Characterisation of the fault: Locked at the lower stop === Permanent fault. P0075: Variable timing electrovalve From : Distant. Characterisation of the fault: Problem === Permanent fault. P0485: Status of the fan assembly From : Local. Characterisation of the fault: Short circuit to negativeShort circuit to positiveOpen circuit === Intermittent. P0010: Variable timing electrovalve From : Distant. Characterisation of the fault: Problem === Total: 6 DTCs found |
Sponsored Link |
Liens sociaux |
|
|
Discussions similaires | ||||
Discussion | Auteur | Forum | Réponses | Dernier message |
voyant "Stop" , " moteur " et " serv "allumé en acceleration | zikox | Mécanique générale | 48 | 21/12/2016 18h10 |
Difference entre véhicule badgés "TDI" et "2.0TDI" | VWPassat31 | Automobile en général | 5 | 18/10/2016 01h17 |
"magneti marelli, sfr200" | RAN | Immobilizer dumps/solutions | 0 | 01/07/2015 16h34 |
"air bag" de tableau de bord"chevrolet aveo"" | TOUFIK 40 | Airbag | 0 | 20/04/2014 22h06 |
Défaut Airbag Peugeot 206 "ceinture à sécurité préhension pyrotechnique" | alpha2302 | Airbag | 6 | 20/07/2011 19h37 |