Tlemcen Car electronics  

Précédent   Tlemcen Car electronics > Outils & Diag > Outils de diagnostique > LEXIA, PP2000, DiagBox

VF2
Réponse
 
Outils de la discussion
Vieux 30/11/2016, 22h01   #1
Simple
Membre attaché
 
Avatar de Simple
 
Date d'inscription: août 2014
Localisation: NA
Messages: 279
Thanks: 5
Thanked 414 Times in 80 Posts
Pouvoir de réputation: 20
Simple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud of
Par défaut DiagBox 8.01 Installation (updated)

Installing DiagBox 8.01
This procedure and the software provided are intended for personal, educational and experimental use to install DiagBox 8.01 and related updates. I hold no responsibility for any illegal or improper usage. Carry out this procedure at your own risk.

Notice
- Links for all required software, updates and tools are in the attachments.

Preparation for Installing DiagBox 8.01 on Notebooks and VMWare Workstation
- Starting with any (32 bit) Windows preferably (XP or 7), install .NET 3.51 and Windows drivers or VMWare Tools (if on VMWare Workstation or Player).

Preparation for Installing DiagBox 8.01 on VirtualBox
- Having installed 32 bit Windows + VirtualBox Guest Additions + .NET 3.51, use the Powershell Command "Get-WMIObject win32_BIOS" or the "DMIdecode" tool to obtain BIOS information (not essential).
- Close VirtualBox and start an administrator's CMD, navigate to "C:\Program Files\Oracle\VirtualBox\" and execute the following command (Replacing "Your VM" with your Virtual Machine's name, and System Serial with your hardware's or any code or text such as "CDN29326BH"):
C:\Program Files\Oracle\VirtualBox>VBoxManage setextradata "Your VM" "VBoxInternal/Devices/pcbios/0/Config/DmiSystemSerial" "System Serial"

Installing DiagBox 8.01
1- Install DiagBox 7.01 and restart DiagBox to run update 7.02. Install update 7.xx-7.57 (this will create "C:\AWRoot\dtwr\cfg\Config.sys").
2- Install "VC++ 2008 Redistributable Package", a copy will be available in "C:\teleassistance\visualC\vcredist_x86.exe" after installing DiagBox.
3- Restart the computer and use “Kill_DiagBox_Tasks.bat” to stop related processes and rename "C:\AWRoot" to "C:\AWRoot7"
4- Run DiagBox 8.01 installation (it will uninstall v7.xx first) until it requests Activation. Close it (X) and run the tool "AWRoot_v7_Conf+Ativation_v8.exe" it will copy configuration from "C:\AWRoot7\.." and inject the necessary files.
5- Run DiagBox again, it should continue the installation successfully.

Done !,

Restart DiagBox 8.01 as Administrator to confirm all is well (don't be concerned about the reported version and do not start Lexia or PP2000 yet). If you face an issue, run the activation tool again and/or review "Versions" below.

If DiagBox runs fine, ensure you keep a backup copy of the file “C:\AWRoot\bin\fi\APPDIAG.SYS” in a safe location.

Installing Updates
1- Download and install "DiagBox_updt_802.ISO" update.
2- Download and install subsequent v8.xx updates or Maitresox updates (from 7.66+).

Versions
The order of the version lines and which one is active in VERSION.INI is important for the correct running of the system. DiagBox will display 08.01 if set as shown below. But Lexia will NOT work with the line (version=08.xx) in "version.ini" (xx is the version number depending on which update is applied).
[APPLICATION]
version=08.01
version=07.65

If Lexia is started with "version=08.01" in Version.ini not commented, "APPDIAG.SYS" will be corrupted and it will need to be restored before DiagBox will work again. To operate Lexia (after starting DiagBox with 8.xx), edit "version.ini" and comment "version=08.xx" (by inserting ";" as shown below) and save BEFORE starting LEXIA.

Setting "version.ini" to 07.xx (by removing or commenting "version=8.xx" permanently) before starting DiagBox, will prompt DiagBox to report V 07.xx, but everything will work fine as version 8.xx..
[APPLICATION]
;version=08.08
version=07.72

Updates
- DiagBox v7 and v8 install and run on all x86 (32bit) Windows including 10 TH1, TH2, RS1 and RS2.
- Entering a System Serial for the Virtual Machine (as described above) resolves the "psaAagent.exe" and the missing tabs issue on VirtualBox.
- If you get "Error 2" after restarting DiagBox, try commenting "version=8.xx" in "version.ini" before restarting DiagBox again.

P.S. DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.

Enjoy; Simple.
Fichiers attachés
Type de fichier : txt DBox_8xx_Install_and_update.txt (1,3 Ko, 526 affichages)
Type de fichier : zip Kill_DiagBox_Tasks.zip (301 octets, 351 affichages)
Simple est déconnecté   Réponse avec citation
The Following 36 Users Say Thank You to Simple For This Useful Post:
2009mohrice (24/09/2018), alinjadii (20/12/2017), autodiagauto (29/11/2018), brahim chafa3 (28/01/2023), cracker563 (04/07/2020), dancostea20022 (13/03/2017), dart (28/08/2017), DIAGAUTO33 (24/11/2017), drissdiag (25/02/2018), electronico (16/12/2017), estwood68 (06/01/2018), fefjp (15/03/2020), hamiza (07/11/2017), Incisif (29/03/2019), indians42 (14/04/2018), joe1984 (20/05/2018), juju13fr (16/04/2018), karimseri (23/07/2019), KBK (05/01/2020), kilm (02/03/2018), mustaphcl (21/01/2018), Nextrick (13/03/2017), ouragh (20/02/2019), prodiag2017 (13/04/2018), prt93 (28/12/2019), raf68 (21/02/2020), Scanworld2020 (29/07/2018), starcrysis (01/03/2018), tatel (02/02/2018), taxi5114 (26/11/2017), Tidus97 (05/12/2017), transitforum (06/02/2019), Walid25 (07/04/2019), xavi5757 (28/02/2020), Y.B tec (01/03/2018), yvespapou (13/03/2017)
Vieux 29/01/2017, 05h02   #2
Simple
Membre attaché
 
Avatar de Simple
 
Date d'inscription: août 2014
Localisation: NA
Messages: 279
Thanks: 5
Thanked 414 Times in 80 Posts
Pouvoir de réputation: 20
Simple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud of
Par défaut

It seems some people are packaging and selling Diagox 8.17. I guess I cannot complain, it already happened to maitresox before.

Here is the video (dated July 2016); it is ******ly quite good:

https://www.youtube.com/watch?v=100rbi5Ge20
Simple est déconnecté   Réponse avec citation
The Following 2 Users Say Thank You to Simple For This Useful Post:
2009mohrice (24/09/2018), Walid25 (07/04/2019)
Vieux 29/01/2017, 09h20   #3
guyguy307
T-E master
 
Avatar de guyguy307
 
Date d'inscription: mai 2016
Localisation: france toulouse
Âge: 40
Messages: 2 104
Thanks: 4 145
Thanked 2 586 Times in 1 150 Posts
Pouvoir de réputation: 37
guyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond repute
Par défaut

Hello simple, this is a shame, people are idiots and thieves who do not recognize the fableful work you did. It must be denounced and stopped
guyguy307 est connecté maintenant   Réponse avec citation
The Following User Says Thank You to guyguy307 For This Useful Post:
Walid25 (07/04/2019)
Vieux 26/02/2017, 20h12   #4
kilm
Membre trés attaché
 
Avatar de kilm
 
Date d'inscription: juillet 2014
Localisation: France, Marseille
Messages: 695
Thanks: 1 623
Thanked 1 078 Times in 278 Posts
Pouvoir de réputation: 29
kilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant future
Par défaut

Bonsoir,

Tout d'abord merci beaucoup à Simple pour son travail, et pour le partager gracieusement !

Je suis entrain de faire l'installation. J'en suis à la V08.02. Mais je ne suis pas doué en anglais et j'ai du mal à comprendre (même avec google translation) la partie du tuto qui a pour titre "Versions".

Apparemment il y a une modif à faire dans le fichier Version.ini mais je ne comprend pas laquelle. Quelqu'un pourrait m'éclairer ?

Merci
kilm est déconnecté   Réponse avec citation
The Following User Says Thank You to kilm For This Useful Post:
Y.B tec (01/03/2018)
Vieux 26/02/2017, 23h38   #5
Simple
Membre attaché
 
Avatar de Simple
 
Date d'inscription: août 2014
Localisation: NA
Messages: 279
Thanks: 5
Thanked 414 Times in 80 Posts
Pouvoir de réputation: 20
Simple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud ofSimple has much to be proud of
Par défaut

For Lexia and PP2000 to work, version needs to be 07.xxx and NOT 08.xxx. Use this standard [version=07.Update#]. So after update 8.02 --> set version=07.802 and after 8.10 --> version=07.810 etc.

Basically, after the update and before starting DiagBox, set the "version.ini" file to :

[APPLICATION]
version=07.817

You can keep the version # the same (07.817) with all updates if you wish, it will work fine regardless..

Now, set the language of your choice through the menu while you are at update 8.02. Otherwise it will not be possible through the menu if you install later updates, and you will have to edit some other files.
Simple est déconnecté   Réponse avec citation
The Following 3 Users Say Thank You to Simple For This Useful Post:
kilm (02/03/2018), Walid25 (07/04/2019), Y.B tec (01/03/2018)
Vieux 27/02/2017, 00h02   #6
kilm
Membre trés attaché
 
Avatar de kilm
 
Date d'inscription: juillet 2014
Localisation: France, Marseille
Messages: 695
Thanks: 1 623
Thanked 1 078 Times in 278 Posts
Pouvoir de réputation: 29
kilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant future
Par défaut

Merci beaucoup pour ta réponse. Je comprend mieux maintenant.

Il ne faut changer que le contenu du fichier "Version.Ini" ? Le fichier "Version" on ne modifie pas ?

J'ai déjà installé les mises à jour suivantes. Sans changer la langue. Mais à l'ouverture de Diagbox, sur la page d’accueil, je suis déjà en français. Je suppose que le reste du programme sera aussi en français ?

Merci

Dernière modification par kilm ; 27/02/2017 à 00h04.
kilm est déconnecté   Réponse avec citation
The Following User Says Thank You to kilm For This Useful Post:
Y.B tec (01/03/2018)
Vieux 16/03/2017, 20h46   #7
kilm
Membre trés attaché
 
Avatar de kilm
 
Date d'inscription: juillet 2014
Localisation: France, Marseille
Messages: 695
Thanks: 1 623
Thanked 1 078 Times in 278 Posts
Pouvoir de réputation: 29
kilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant futurekilm has a brilliant future
Par défaut

Bonjour,

Je me répond à moi même si ça peut servir à d'autres

Citation:
Envoyé par kilm Voir le message
Il ne faut changer que le contenu du fichier "Version.Ini" ? Le fichier "Version" on ne modifie pas ?
Modifier que le fichier "Version.Ini" ça n'a pas suffit chez moi, en essayant d'ouvrir Lexia j'ai fait planter Diagbox, par contre en changeant le fichier "Version" aussi là ça passe bien.

Citation:
Envoyé par kilm Voir le message
J'ai déjà installé les mises à jour suivantes. Sans changer la langue. Mais à l'ouverture de Diagbox, sur la page d’accueil, je suis déjà en français. Je suppose que le reste du programme sera aussi en français ?
Oui ! ^^

Merci encore à Simple.

A+
kilm est déconnecté   Réponse avec citation
The Following 3 Users Say Thank You to kilm For This Useful Post:
Nextrick (30/03/2018), Walid25 (07/04/2019), Y.B tec (01/03/2018)
Vieux 01/03/2018, 21h59   #8
guyguy307
T-E master
 
Avatar de guyguy307
 
Date d'inscription: mai 2016
Localisation: france toulouse
Âge: 40
Messages: 2 104
Thanks: 4 145
Thanked 2 586 Times in 1 150 Posts
Pouvoir de réputation: 37
guyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond reputeguyguy307 has a reputation beyond repute
Par défaut

Salut update jusqu'a 7.82 ensuite fait mise a jour v8
__________________
La passion est un moteur dont personne ne mesure la puissance
guyguy307 est connecté maintenant   Réponse avec citation
Vieux 30/03/2018, 19h50   #9
jphp
Moderateur
 
Avatar de jphp
 
Date d'inscription: mars 2013
Localisation: Alliat France
Messages: 17 054
Thanks: 6 351
Thanked 13 724 Times in 7 578 Posts
Pouvoir de réputation: 249
jphp has a reputation beyond reputejphp has a reputation beyond reputejphp has a reputation beyond reputejphp has a reputation beyond reputejphp has a reputation beyond reputejphp has a reputation beyond reputejphp has a reputation beyond reputejphp has a reputation beyond reputejphp has a reputation beyond reputejphp has a reputation beyond reputejphp has a reputation beyond repute
Par défaut

salut cette version n'est pas stable
Citation:
Envoyé par jphp Voir le message
salut, j'ai installé la version de Simple sur un autre post ici sur TE diagbox 8.17 fonctionne bien il ne mets pas le vci a jour ! il detecte moin de calculateurs que 7.76 !! calculateurs inconu !!, mais sur un C8 j'ai eu besoin de lexia !, il s'ouvre me demande le DAM je le tape , il me met
"une erreur est survenue !"
" les outils s'ont maintenant désactivés "...
je relance diagbox il me demande de proceder a l'activation !!
je remplace l'app diag sys par un que j'avais sauvegardé , diagbox démarre activé , je relance lexia !! et pareil !! je vais devoir revenir en 7.76 ou 7.82
cette version n'est pas stable !
@ bon week end
jphp est déconnecté   Réponse avec citation
The Following User Says Thank You to jphp For This Useful Post:
diago2001 (06/11/2018)
Sponsored Link
Réponse

Liens sociaux

Outils de la discussion

Règles de messages
Vous ne pouvez pas créer de nouvelles discussions
Vous ne pouvez pas envoyer des réponses
Vous ne pouvez pas envoyer des pièces jointes
Vous ne pouvez pas modifier vos messages

Les balises BB sont activées : oui
Les smileys sont activés : oui
La balise [IMG] est activée : oui
Le code HTML peut être employé : non

Navigation rapide

Discussions similaires
Discussion Auteur Forum Réponses Dernier message
TUTO installation diagbox ( détaillé ) Problème installation JOohns LEXIA, PP2000, DiagBox 3 03/01/2023 08h30
installation diagbox foulques LEXIA, PP2000, DiagBox 12 19/05/2014 17h30
Installation pas a pas DiagBox v. 7.1 papi68 Tutoriels 0 31/07/2013 00h07
installation diagbox 7.xx machin76 LEXIA, PP2000, DiagBox 7 20/06/2013 08h49


Fuseau horaire GMT +1. Il est actuellement 15h27.


Tlemcen-electronic.com ne tolère aucune des opérations illégales et ne prend pas en charge les responsabilités pour la perte de l'équipement utilisé.
Toutes discussion sur ce forum est à des fins expérimentales et éducatives seulement. Utilisez les informations fournis par les membres à vos propres risques.
Partenaires : Cars Review - DZSAT : Télévision Par Satellite,Médias,Fréquences,Card sharing.
- GSM-ALGERIE - [ Box & outils Gsm ] - Guide Algérie- Musique mp3 - Bled Music" - EcuServer - Immo off & virgin, airbag cleaner online - Rafplus.com le gratuit sur internet - presse algerie - OBDFR.COM, France Diag - Info Algerie - Le Portail de petites annonces en Algérie- Informastore - Boutique Informatique & Multimedia - mandataire auto - Annonces Algérie HexaShopping - ChipTuning professionnel express
Tlemcen-electronic © All right reserved