320d e46 error code 47

ilirii · 14/11/2015, 15h10

hi i have a bmw e 46 1999 320d wich i have this code i dont know what i could be i have only this error 47 synchronization of speed sensor do i have to turn the engine to timing points and reconect the cranckshaft sensor or what any idea ??????????

adel2789 · 14/11/2015, 16h51

hello i didn't understand what is the problem exactly, the car doesn't start or just a simple fault?
otherwise the speed sensor is attached to the abs module

daf06 · 14/11/2015, 17h31

hi,
you have a timing problem between speed sensor tea cranckshaft
check whether your tour minute hand moves when you turn the starter
if you have a cut sensor !!!

do not forget thanks

ilirii · 14/11/2015, 17h55

Citation:

Envoyé par daf06

hi,
you have a timing problem between speed sensor tea cranckshaft
check whether your tour minute hand moves when you turn the starter
if you have a cut sensor !!!

do not forget thanks

when i try to start the car the rpm mounts untill 0.3 it goes i think but would not start the car so :S

jah83 · 15/11/2015, 07h13

Did you touch to the pomp? If yes this fault means that the pomp is not "caler" , sorry I dont know this word in english but it s quite the same thing that when a timing belt is not in the good place between up and down part of the engine

ilirii · 15/11/2015, 09h59

Citation:

Envoyé par jah83

Did you touch to the pomp? If yes this fault means that the pomp is not "caler" , sorry I dont know this word in english but it s quite the same thing that when a timing belt is not in the good place between up and down part of the engine

i have sent it to auvegne electro diesel to calee(timing)i have 1 year guaranty i just want to know if that is or i found this on a web that it explains my problem so i will do this with diss if no luck then electro diesel

14/11/2015, 15h10	#1
ilirii Membre attaché Date d'inscription: octobre 2015 Localisation: clermont ferrand Messages: 341 Thanks: 177 Thanked 417 Times in 174 Posts Pouvoir de réputation: 13	320d e46 error code 47 hi i have a bmw e 46 1999 320d wich i have this code i dont know what i could be i have only this error 47 synchronization of speed sensor do i have to turn the engine to timing points and reconect the cranckshaft sensor or what any idea ??????????

Discussions similaires
Discussion	Auteur	Forum	Réponses	Dernier message
Fiat 312 mp3 Black AUX2+ code error	kadi0209	Autoradio et Navigateur GPS	0	14/04/2015 20h56
Repairing Toyota error code P1300/13	Shadab	Toyota, Lexus	2	01/11/2014 20h50
write error xprog m hc08 start error	alexisraynaud	Immobilizer dumps/solutions	5	12/08/2014 11h42
Error fatal : Unknown error during init	djkikou	Autocom, Delphi, Actia, Bosch, SPC, BrainBee, Autel	7	06/02/2014 09h07

14/11/2015, 16h51	#2
adel2789 Membre trés attaché Date d'inscription: novembre 2014 Localisation: Tunisie,tunis Messages: 555 Thanks: 79 Thanked 109 Times in 82 Posts Pouvoir de réputation: 13	hello i didn't understand what is the problem exactly, the car doesn't start or just a simple fault? otherwise the speed sensor is attached to the abs module

14/11/2015, 17h31	#3
daf06 Débutant T-E Date d'inscription: novembre 2015 Localisation: FRANCE,MONACO Messages: 77 Thanks: 7 Thanked 6 Times in 5 Posts Pouvoir de réputation: 9	hi, you have a timing problem between speed sensor tea cranckshaft check whether your tour minute hand moves when you turn the starter if you have a cut sensor !!! do not forget thanks

15/11/2015, 07h13	#5
jah83 TE-MANIA Date d'inscription: janvier 2013 Localisation: Frejus Messages: 10 294 Thanks: 12 759 Thanked 18 420 Times in 6 620 Posts Pouvoir de réputation: 236	Did you touch to the pomp? If yes this fault means that the pomp is not "caler" , sorry I dont know this word in english but it s quite the same thing that when a timing belt is not in the good place between up and down part of the engine