Tlemcen Car electronics - Afficher un message

bubu782001 · 27/10/2014, 22h00

Of corse it will not work just virgin "as it is".

It must be reprogrammed with Clip.

I mean, you need to program APV to UCH, then program all your cards (linked with that APV) then VIN and finally the configuration of the UCH.

Also you need to configure CAN network into the "new programmed" UCH.

Then the car will start.

Best regards,

27/10/2014, 22h00
bubu782001 Débutant Date d'inscription: juin 2011 Localisation: Romania, Bucharest Messages: 12 Thanks: 2 Thanked 16 Times in 7 Posts Pouvoir de réputation: 0	Of corse it will not work just virgin "as it is". It must be reprogrammed with Clip. I mean, you need to program APV to UCH, then program all your cards (linked with that APV) then VIN and finally the configuration of the UCH. Also you need to configure CAN network into the "new programmed" UCH. Then the car will start. Best regards,