Tlemcen Car electronics - Afficher un message - dump vierge frein a main electrique scenic

bubu782001 · 04/11/2014, 07h44

Unfortunately my EPB have flash problems (not eeprom). When reprogramming stop at 88% (with Can Clip) the flash inside MCU get corrupted.

However i managet to get another good unit from a crashed Scenic. I will try next week to post both dumps (eeprom and flash).

For writing flash part on this MCU (MC908AZ60AMFU mask 1L87J) you need Orange programmer or ETL programmer.

Eeprom is easy to write (UPA, XPROG etc).

Security bytes for this MCU: FF-FF-FF-FF-FF-FF-FF-FF

PS do not forget to rise IRQ pin when reading/writing.

Thank you all for support.

04/11/2014, 07h44
bubu782001 Débutant Date d'inscription: juin 2011 Localisation: Romania, Bucharest Messages: 12 Thanks: 2 Thanked 16 Times in 7 Posts Pouvoir de réputation: 0	Unfortunately my EPB have flash problems (not eeprom). When reprogramming stop at 88% (with Can Clip) the flash inside MCU get corrupted. However i managet to get another good unit from a crashed Scenic. I will try next week to post both dumps (eeprom and flash). For writing flash part on this MCU (MC908AZ60AMFU mask 1L87J) you need Orange programmer or ETL programmer. Eeprom is easy to write (UPA, XPROG etc). Security bytes for this MCU: FF-FF-FF-FF-FF-FF-FF-FF PS do not forget to rise IRQ pin when reading/writing. Thank you all for support.