Pour l'instant nous avons toujours pas trouvé le problème, la voiture ne démarre pas.
Quand je flash le 29F400 avec le fichier immo off fait avec immotool v1.5 n'ecu n'est plus identifiable après.
Le fichier immo off modifie un bloc de valeurs (imprimé d'écran en annexe)
Quand je remet le ori tout est nickel, l'ecu arrive à s'identifier.
Dans aucun des deux cas ca démarre.
Log CMD ci-dessous:
SUZUKI
VITARA
2.0 HDI Bosch EDC15C2
BOSCH EDC15C2 PSA
++++++++++++++++++++++
Identification
++++++++++++++++++++++
BOSCH EDC15C2 PSA
++++++++++++++++++++++
K LINE
Laptop battery charge: 100%
Voltage: 11.3 V.
Warning: Car battery charge - LOW
Connecting...
HW:
Total time: 00:00:01 sec.
OK
++++++++++++++++++++++
Write
++++++++++++++++++++++
BOSCH EDC15C2 PSA
++++++++++++++++++++++
K LINE
*******\Suzuki-Vitara-2.0HDI-EDC15C2-obd-read
File CRC32:0A293F95
********\Suzuki-Vitara-2.0HDI-EDC15C2-obd-read
Laptop battery charge: 100%
Voltage: 11.3 V.
Warning: Car battery charge - LOW
Checksum...
Checksum Ok
Connecting...
Loader Ok
Erasing
Writing...
Please wait 10sec.
Total time: 00:01:54 sec.
OK
++++++++++++++++++++++
Identification
++++++++++++++++++++++
BOSCH EDC15C2 PSA
++++++++++++++++++++++
K LINE
Laptop battery charge: 100%
Voltage: 10.2 V.
Warning: Car battery charge - LOW
Connecting...
HW: 0281010860
SW: 1037353692
Total time: 00:00:02 sec.
OK
Donc pour l'instant on cherche...
|