Afficher un message
Vieux 02/09/2020, 22h22  
gpv
Débutant
 
Avatar de gpv
 
Date d'inscription: août 2020
Localisation: Netherlands, Delft
Messages: 24
Thanks: 34
Thanked 19 Times in 14 Posts
Pouvoir de réputation: 0
gpv is on a distinguished road
Par défaut

Mon français est terrible, donc ma réponse est en anglais:

It sounds like the BSI and ADML don't synchronize...

It resembles a problem I had with a Renault Clio from 2016. BSI (UCH) was coded and automatically configured to the car, but the remote function didn't work properly:
I could lock the vehicle, but NOT unlock. Finally I found the problem: the HFM (handsfree module) wasn't paired/authorized. The BSI would even go in anti-scanning mode after 3 unlock attempts. (starting the car was no problem)

I could only resolve this problem by up****** the software on the BSI. After the software update it automatically paired the BSI with the HFM.

With PSA cars, I regularly could solve 'strange' problems with up****** the software...

Although the BSI is new, maybe you can perform a software update?
Or maybe update the software of the ADML?

Good luck!
Geert
gpv est déconnecté   Réponse avec citation
The Following User Says Thank You to gpv For This Useful Post:
BlackWar (23/09/2020)