Description
VAG New in V37.0
– MQB Read CS by OBDII (VDO TFT, VDO Virtual Cockpit, JCI)
– MQB All keys lost – added possibility to make it if also the car is with automatic transmission
– Read MQB transmission control units – Read CS, Clone/Restore
– Read DL501 Generation 2 transmission control unit (A6/A7 2013+) – Clone/Restore
– Replace MQB dashboard – possibility to clone an existing dashboard
– Adapt modules to MQB cars – Engine control unit, Transmission control unit, Steering lock
– Possibility to adapt manually any Immo V parts (MQB/BCM2) if the CS of the parts is known
– For cars with Immo IV dashboard (CS is 12 bytes) and Immo V engine control unit (CS is 16 bytes) – e.g. Caddy/Tiguan/Touaran/Transporter 2016+ – possibility to extract the CS (16 bytes) of the key and of the ECU from the CS of the dashboard
– Unsuppoprted VDO NEC dashboards added – both for mileage and keys (e.g. VW Fox)
VAG New in V37.1
– Read MQB transmission control units – Read CS, Clone/Restore – added some unsupported DQ200x modules
VAG New in V37.2
– Some fixes for the MQB dealer key preparation
VAG New in V37.3
– Delphi DCM3.7 added for reading – PIN/CS/Flash
VAG New in V38.0
– Component protection generation 2 – new online functionality used for adaptation on second hand modules for Audi (A4/A5/Q5 2007-2017, A6 2003-2018, A7 2010-2018, A8 2010-2018, Q7 2005-2015),
VW Touareg 2010-2018 and Audi/VW/Skoda MQB. Includes also MQB, but doesn’t include MLB cars.
VAG New in V38.1
– Added modules for diagnostic for the latest MLB platform (A6/A7/A8 2017+, Q7 2015+)
---------- Post added at 21h14 ---------- Previous post was at 21h13 ----------
