Tlemcen Car electronics - Afficher un message

phil1 · 29/07/2023, 14h16

slt les gars

NOTE: Connect 120 Ohm resistor between CAN-L and CAN-H lines to diagnose PAS module using CAN CLIP in the “on the bench” connection. There is no need for this resistor when connecting to RENAULT ECU TOOL

29/07/2023, 14h16
phil1 Genious T-E Date d'inscription: octobre 2016 Localisation: france Messages: 4 668 Thanks: 5 968 Thanked 8 459 Times in 3 734 Posts Pouvoir de réputation: 99	slt les gars NOTE: Connect 120 Ohm resistor between CAN-L and CAN-H lines to diagnose PAS module using CAN CLIP in the “on the bench” connection. There is no need for this resistor when connecting to RENAULT ECU TOOL __________________ les fous ne comprennent rien mais je pense qu' ils sont devenus fous parce qu' ils ont tout compris