PDA

Voir la version complète : P206 1.4HDI, EDC16C3 - immo off and correct CRC


Thomasing
25/08/2022, 11h04
Hi friends, i would like to ask you. I have Peugeot 206, 1.4 HDI, EDC16C3 and i need immo off. When i do immo off at eeprom 95160, car started, but on limp mode (not over 3000rpm), i think, that problem is CRC at eeprom.

Can you help me please? I can't recalculate the CRC to make it correct.

Thank you very much for your help.

DAVID02620
25/08/2022, 11h41
salut c est juste que ton immo off n est pas bon

Thomasing
25/08/2022, 12h18
this is original dump from ecu, not immo off.

phil1
25/08/2022, 12h20
slt

oui on a vu ...
mais pas de participation de ta part depuis 2014+il faut 400 mess ...
autant dire t es pas sorti de l auberge..!

Thomasing
25/08/2022, 12h32
There is my immo off, but, CRC is bad, so car start, but no over 3000RPM.

Thomasing
25/08/2022, 12h36
slt

oui on a vu ...
mais pas de participation de ta part depuis 2014+il faut 400 mess ...
autant dire t es pas sorti de l auberge..!
im so sorry, I didn't use this forum because I didn't know if I could use English here.

phil1
25/08/2022, 12h38
There is my immo off, but, CRC is bad, so car start, but no over 3000RPM.

comme reponse post 2 immo mal fait

donc pour que tu comprenne mieux
voila ton fichier off 100/100 fontionnel
seulement proteger par mp que en aucun cas je te donnerai...pk ? reponse post 4 ....tu aide pas donc pas d aide
c est cruel mais c est la vie..

Thomasing
25/08/2022, 12h45
i am sorry again, I use google translate, so some text translations are difficult for me.

I understand that you don't want to help someone who has 4 posts since 2014, but I would like to help this forum if you don't reject me when I write in English :)

phil1
25/08/2022, 12h52
i am sorry again, I use google translate, so some text translations are difficult for me.

I understand that you don't want to help someone who has 4 posts since 2014, but I would like to help this forum if you don't reject me when I write in English :)

that you participate in English is not a problem ... but the lack of participation and reputation yes .. not to mention the rules of the forum that you had to read chiptuning section

Thomasing
25/08/2022, 13h06
ok, i understand... i am so sorry for again, looking around here and seeing how it works here... Can you please send me PM with password please?

phil1
25/08/2022, 13h11
ok, i understand... i am so sorry for again, looking around here and seeing how it works here... Can you please send me PM with password please?

regarde ici

https://www.tlemcen-electronic.com/forum/showthread.php?t=2

Thomasing
25/08/2022, 13h33
regarde ici

https://www.tlemcen-electronic.com/forum/showthread.php?t=2
thank you for a link and your explanation.

Jock66
25/08/2022, 15h50
comme reponse post 2 immo mal fait

donc pour que tu comprenne mieux
voila ton fichier off 100/100 fontionnel
seulement proteger par mp que en aucun cas je te donnerai...pk ? reponse post 4 ....tu aide pas donc pas d aide
c est cruel mais c est la vie..


Salut phil,

Mdr le mec doit avoir les boules !!!!

Bien joué


Envoyé de mon iPhone en utilisant Tapatalk

phil1
25/08/2022, 16h06
Salut phil,

Mdr le mec doit avoir les boules !!!!

Bien joué


Envoyé de mon iPhone en utilisant Tapatalk
slt jock

loin de moi d etre mechant
mais c est juste pour faire comprendre a tous ceux qui aide jamais ,participe pas, ne respecte pas les regles et les membres du forum ..que rien n es du.

Thomasing
25/08/2022, 18h27
I wrote my first question, I needed help and I wanted to join this forum and you had to teach me a lesson.

thank you very much...

---------- Post added at 05:27 PM ---------- Previous post was at 05:25 PM ----------

I don't understand this hostile environment, I apologized several times and explained that it is a big problem to understand your speech when you don't write in English and translating text from French to English is very difficult.

DAVID02620
25/08/2022, 19h14
slt jock

loin de moi d etre mechant
mais c est juste pour faire comprendre a tous ceux qui aide jamais ,participe pas, ne respecte pas les regles et les membres du forum ..que rien n es du.

salut phil tout a fait d accord avec toi

et avec eux c est toujours le meme discours

Alessiapia14
25/08/2022, 21h47
I wrote my first question, I needed help and I wanted to join this forum and you had to teach me a lesson.

thank you very much...

---------- Post added at 05:27 PM ---------- Previous post was at 05:25 PM ----------

I don't understand this hostile environment, I apologized several times and explained that it is a big problem to understand your speech when you don't write in English and translating text from French to English is very difficult.


Hello,

Isn't one apologize,just a life,just respect all rules of T-E FORUM.

I have the solution too, but you don't have time for the other members, so I don't have time to give you, so no solution to give in to you, find time and you will find the solution. solution. who helps his neighbour, finds help in return

OK bro ?


Pas de clic sur thanks, pas de clics sur réputations,pas d aide !!

phil1
25/08/2022, 22h00
pour une meilleure comprehenssion

traduction allessiapia en tcheque...lol

Ahoj,

Není omluva, jen život, prostě respektuj všechna pravidla T-E FÓRA.

Já mám řešení taky, ale ty nemáš čas na ostatní členy, tak nemám čas ti dávat, takže žádné řešení, abych ti ustoupil, najdi si čas a řešení najdeš. řešení. kdo pomůže svému bližnímu, najde pomoc na oplátku

OK brácho?

CHATONDU38
25/08/2022, 22h17
Hello

You can fond Help here. http://mod-files.com/

abdel_rs
28/08/2022, 17h34
salu thomasing la solution pour ta voiture accelere faut la faire un vierge de eprom la voiture va acceler bon chance

fruky
29/08/2022, 17h15
salut les mec,
tu parle en français il répond en english.
desolé pas compris WTF