I change the dash on Audi A3 TDI 2001 and the car didn't turn on

[didi_du_93000]

Hello,:):)

I change the dashboard on my audi A3, and now the car didn't tur on because the Immo is active.
I would like to remove the immo.

Please help me. :confused::confused:
Thanks

Didi

[Amine-TE]

when you complete your profile we will help u ;)

Regards

[didi_du_93000]

I don't understand My profile is complete.
What is the problem?

[jayontime]

you need to put where in paris i think like country then place

hope this helps

[jayontime]

oh oh and read rules?

thats what i was told

same gose for every one els i think read rules more than once and
update profile with correct country and town

[didi_du_93000]

And now it's ok???

[Amine-TE]

You can remove the old eprom from the old dash then solder it in the new one and the car will start ;)

[didi_du_93000]

You can remove the old eprom from the old dash then solder it in the new one and the car will start ;)


If i turn off the immo on the ecu. the car turn on with the new dashboard?
On this dashborad the km is on the 68HC912. But the pin i don't know if it's on the same processour or no.
You know where is the pin and if is it possible for change this pin?

[Amine-TE]

I dont know the adress for pin code, but try to see VagTacho if can do this job :)

[jayontime]

pos:Dt file and i will look at it for you

[didi_du_93000]

I dont know the adress for pin code, but try to see VagTacho if can do this job :)

i open the ECU. i found the eeprom 24c04. I would like to remove th immo.
But on Immokiller v1.10 he say it's a 24c02.

the ecu is a Bosch (0 281 010 308)
i joint the pictures.

What my soltion? :confused::confused:

thanks

[Amine-TE]

Yes, use immokiller then check your PM

[didi_du_93000]

Hello, A friend remove the immo on my Audi A3. he use edc soft.
You know this soft?
I think it's not possible with IMMOKILLER because my ECU is a bosch edc15p+

thanks.

[didi_du_93000]

If you have hc912dg128 in dash the pin code is in address $84 and &85,
convert from hex to decimal

Br

Ho!!!!

Thanks for this infomation...
Very good information for the futur. ;)