manueldord
06/02/2014, 10h11
Bonjour camarade a un problème B BSI de bord modifié ont 120000 km pour l'enregistrement une fois connecté au tableau de bord comme le dit tachymétrique doux.
The mileage is stored in the next lines:
Dash manufacturer is Sagem, BSI is made by Valeo
0670: xx xx xx xx xx xx xx xx FF F0 AD CF xx xx FF F0
0680: AD CF xx xx FF F0 AD CF xx xx FF F0 AD CF xx xx
0690: FF F0 AD CF xx xx FF F0 AD CF xx xx FF F0 AD CF
06A0: xx xx FF F0 AD CF xx xx xx xx xx xx xx xx xx xx
where the next bytes:
FF F0 AD CF - is a mileage
Instruction: read the 68HC912DG128 chip from the BSI (Valeo), and
edit the mileage as shown here. Then connect dash to the connectors .
on the car WITHOUT the BSI. Put the key to the ignition, but do not start!!!
just power on the dash. Dash value will self deletes.
After this connect the BSI and km value will be automatically loaded from BSI to dash.
mais pas moyen de revenir à l'original que je peux faire quelqu'un peut m'aider merci et salutations
: Banghead:: Banghead:: Banghead:
The mileage is stored in the next lines:
Dash manufacturer is Sagem, BSI is made by Valeo
0670: xx xx xx xx xx xx xx xx FF F0 AD CF xx xx FF F0
0680: AD CF xx xx FF F0 AD CF xx xx FF F0 AD CF xx xx
0690: FF F0 AD CF xx xx FF F0 AD CF xx xx FF F0 AD CF
06A0: xx xx FF F0 AD CF xx xx xx xx xx xx xx xx xx xx
where the next bytes:
FF F0 AD CF - is a mileage
Instruction: read the 68HC912DG128 chip from the BSI (Valeo), and
edit the mileage as shown here. Then connect dash to the connectors .
on the car WITHOUT the BSI. Put the key to the ignition, but do not start!!!
just power on the dash. Dash value will self deletes.
After this connect the BSI and km value will be automatically loaded from BSI to dash.
mais pas moyen de revenir à l'original que je peux faire quelqu'un peut m'aider merci et salutations
: Banghead:: Banghead:: Banghead: