Voir la version complète : need fast response
where does number 10 wire goes can someone find a wire diagram where it ends and begins where it goes cus i dont have any electricity there +12 so i cant turn up the car no diagnose nothing pls help fast
bahlsen007
15/11/2015, 19h30
You should give more details about it like what is the car the year the model and what is your probleme exactly
You should give more details about it like what is the car the year the model and what is your probleme exactly
well its a 136hp e46 1999 i was doing some stuff in that area and i hade that wire opened up i was searching for something then it touched to negative body of the car i hear a clack and no +12 there looked for scanner no dde no abs not a system respondet mounten another ews same took +12 directly from batter nothing so have to find where it ends cus where it starts its ews but where it ends i need looked up the fuses and everything about it nothing all good either the wire is burned or dont know ???????
Salut ,la boite a fusible est dans la boite a gants .
Salut ,la boite a fusible est dans la boite a gants .
je deja regarde tout ca va bien je demonte boite a gants tout ok le fil je sepas ou cava aler ce ca que je cherch sorry no good french speaker
Salut ,la boite a fusible est dans la boite a gants .
je deja regarde tout ca va bien je demonte boite a gants tout ok le fil je sepas ou cava aler ce ca que je cherch sorry no good french speaker
bahlsen007
15/11/2015, 21h17
Check on this site
http://www.bmw-planet.com/diagrams/release/fr/
you have some technic details for bmw and wiring diagram then if you find what you want please come back here for inform us
Check on this site
http://www.bmw-planet.com/diagrams/release/fr/
you have some technic details for bmw and wiring diagram then if you find what you want please come back here for inform us
i already looked at this what iam searching is wirediagram where it goes pin 10 to where it goes without me unmouting all the wires in the car to watch where it goes and whats connected to it thanks
bahlsen007
15/11/2015, 21h57
Im sorry but i dont have the wiring diagram of the ews module but have you check this :
main*fuse panel: check fuses*9, 22, 27, 29, 30*(ignition switch),*54*(fuel pump), and*14, 49, 67*(EWS).*
Inspect all fuses in the glove compartment if you're dealing with a hard to diagnose no start problem.
-*high amp fuses*above main*fuse panel*(fuseable links).*
There is an 80 amp for the DME and DME main relay, and a*50 amp fuse*for the ignition switch.*
Im sorry but i dont have the wiring diagram of the ews module but have you check this :
main*fuse panel: check fuses*9, 22, 27, 29, 30*(ignition switch),*54*(fuel pump), and*14, 49, 67*(EWS).*
Inspect all fuses in the glove compartment if you're dealing with a hard to diagnose no start problem.
-*high amp fuses*above main*fuse panel*(fuseable links).*
There is an 80 amp for the DME and DME main relay, and a*50 amp fuse*for the ignition switch.*
i took all the fuse box looked at the small fuses and big ones u know 40 50 amps that are behind looked at fuses near dde ,in the trunk all good but i cant find the trace where that wire goes thats what iam searching for
bahlsen007
15/11/2015, 22h24
Have you check the fuse next to the engine?because i see that the pin 10 is the power supply and it comes from the terminal 30 and the terminal 30 is if i dont make mistake next to the engine on the e46
Have you check the fuse next to the engine?because i see that the pin 10 is the power supply and it comes from the terminal 30 and the terminal 30 is if i dont make mistake next to the engine on the e46
iam searching for terminal 30 but there i where are you saying i didnt saw any fuse only a screw and a cable where is the fuse
iam searching for terminal 30 but there i where are you saying i didnt saw any fuse only a screw and a cable where is the fuse
is it the fuse inside
bahlsen007
15/11/2015, 22h43
Yes i think the pin 10 came from this place on the car
Yes i think the pin 10 came from this place on the car
will look for it tomorow thx
well after searching for long time found that the wire was fried and it goes all the ways to fuse 67 it connects to varius cables but the end is fuse 67 thaks for your help all closed
bahlsen007
16/11/2015, 17h19
Congratulations!happy to see that you have solve your probleme
thanks bahlsen007 i i appreciate you help very much
vBulletin® v.3.8.11, Copyright ©2000-2025, Jelsoft Enterprises Ltd. Tous droits réservés - Version française vbulletin-fr.org