Renault Master UCH

[sauzee1]

Hi Guys i am looking for a bit help here i have a Renault Master 2007 2.5dci that has a faulty UCH i managed to get a new one but i am having problems trying to get an auto spark to programme it.I have a Can-clip but dont know the procedure for programming a new UCH.I have also been told i can just change the eeprom chip which i can do as i have a soldering station.Do any of you guys know if i can do it this way or have a procedure for programming a UCH
Any help please
Thanks in advance

[lavpivo]

Hi Guys i am looking for a bit help here i have a Renault Master 2007 2.5dci that has a faulty UCH i managed to get a new one but i am having problems trying to get an auto spark to programme it.I have a Can-clip but dont know the procedure for programming a new UCH.I have also been told i can just change the eeprom chip which i can do as i have a soldering station.Do any of you guys know if i can do it this way or have a procedure for programming a UCH
Any help please
Thanks in advance

Only change eeprom

[sauzee1]

Sorry for not replying for a while but i had lost my password and pc broke
Any way i managed to change UCH and programme it no difference the faults i had were immo,central locking,indicators,hazard lights and wiper would not park
Turned out i had a bad connection on UCH cable tie sorted that,broken wire on fuse board linked wire sorted central locking,indicators and hazards then wiper motor had a broken earth plate new motor sorted that so now all working.I now have ripped out the inside to convert it into a campervan so i will now be busier than ever
Thanks