S'identifier

Voir la version complète : Lexia & PP2000 (from DiagBox 8.35)


Simple
13/11/2016, 10h34
I have attached the APP folder from DiagBox v8.35, it includes Lexia v500.74 and PP2000 v600.79. This arrangement should work with any DiagBox v7.xx and/or DiagBox 8.xx, I have tried it on my own car and it seems to be working fine.

The attachment within this post includes a link to the "APP" folder and a batch file to kill all DiagBox processes.

If you wish to try it (at your own risk and having taken all precautions!):
1- Use the attached “Kill_DiagBox_Tasks.bat” to stop all DiagBox’s processes.
2- Rename your current “C:\APP” folder to “C:\APP8”
3- Extract the downloaded APP-835.7z to “C:\” so that you have “C:\APP”
4- Restart your computer and run DiagBox as usual.

Have fun!

The language is set to English, if you wish to change it, edit the DICO.TXT file in the EXE folders of LEXIA or OUTILREP (PP2000) and replace "GB" with "FR".

If you wish to revert to your original setup.
- Kill all processes again using the wicked batch file
- Rename the C:\APP folder to anything or delete it
- Rename your C:\APP8 back to C:\APP
- Restart the computer and start DiagBox.

P.S. DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.

Regards, Simple.

nikita
22/11/2016, 18h03
thanks bro

nikita
24/11/2016, 06h33
salut
tester il me redemande une activation maintenant

Simple
24/11/2016, 08h17
I have tried this on a number of machines without a problem. I hope you did not make changes in "AWRoot".

Restore your backup copy of "APPDIAG.SYS", if it still does not work, then restore the old APP folder and restore APPDIAG.SYS.

Please provide me with your setup details and what did you try, I will try to replicate what you have done to see what is the problem.

Simple
24/11/2016, 08h33
By the way, make sure you are running DiagBox as Administrator.

DIAGAUTO33
24/11/2016, 08h37
Merci pour ton partage Simple.

J'ai la version 8.18 de Maitresox, je peux installer la tienne sans probleme ?

Tu as testé télécodage avec ?

Merci pour ton aide l'ami.

Simple
24/11/2016, 09h12
I have few test installations, but only one Citroen C8 car.. I did test update 8.35 on my car on Windows XP, 7 and 10.. and I have no problem..

I do not know if other cars like Peugeot 207 have problems or not, but other users can try.

DIAGAUTO33
24/11/2016, 09h59
Ok.
Je vais testé dès que je peux et je tiens au courant.

Merci encore.

DIAGAUTO33
25/11/2016, 06h55
Salut, j'ai testé sur C8 CAN ok.

Après la manip décrite par notre ami simple pour mettre lexia et pp2000 en FR, tout est ok.
Test télécodage sur abs ou bsi ok.

Par contre, j'aimerai savoir si cette mise à jour mets seulement pp2000 et lexia à jour ou ça mets également diagbox à jour ?

Avant, l'appli ne se connecté plus à internet et maintenant, diagbox cherche à se re connecter souvent. C'est pas trop grave mais c'est lassant. J'ai tenté avec le tlcd.fix de notre ami scary mais c'est pareil.

Je continu les test puis je vous tient informé.

Merci encore simple !

Simple
25/11/2016, 07h41
Thank you DIAGAUTO33 for your effort and reporting back. The update only updates Lexia + PP2000 and all associated engines such as SIM, JAVA etc...

There may be one issue, which is relevant to language coding from 2 to 5 characters (FR or fr_FR), this may be a concern specific installations and only affects DiagBox not Lexia or PP2000.

I found the best way is to install DiagBox 8.xx then update APP to 8.35. This way every thing works well together and all your files are original and not manipulated or changed.

DIAGAUTO33
25/11/2016, 08h50
Ok l'ami mais impossible d'installer une version 8 il me semble ...

J'ai la version 7.82 de notre ami maitresox.

Si tu as la solution pour installer et activer la version 8.xx fonctionnelle, je veux bien tenter l'ami.

Merci encore.
@+

Simple
25/11/2016, 09h19
No it is not impossible to install DiagBox v8.xx, I already wrote how to do that, it is much tidier on other sites because I can edit and update my posts (which I cannot do on this site).

However, v7.82 should not have problems with this APP folder update..

maitresox
26/11/2016, 11h02
Salut
La version 8.36 est sortie avec le nouveau 5008 http://www.auto-professionals.co.uk/images/smilies/secret.gif :8:

https://i37.servimg.com/u/f37/16/98/26/48/db3610.jpg (https://servimg.com/view/16982648/228)
A+

Simple
26/11/2016, 12h34
Thanks maitresox,
I am not sure I understand PSA's procedure with respect to updates and their availability.

I downloaded "inter8_36.rar" last week, the French site announced it on Tuesday while it is still not announced on the English site!!!

However, for the past 3 days, it is no longer available for download. I hope they did not discover a bug that necessitated pulling it back.

DIAGAUTO33
28/11/2016, 09h31
Merci pour les infos les gars.

Tu tournes avec la 8.36 maitresox ou c'est le pc de ton taf ?

Simple
28/11/2016, 11h12
The Google translation is:

"Thanks for the info guys.
You turn with the 8. 36 maitresox or it is the pc of your taf?"

I am sorry I don't understand the question.. but I did not use maitresox updates, I used the original DiagBox updates with no changes.

DIAGAUTO33
28/11/2016, 12h27
Sorry friend,
the question is for maitresox.

I ask maitresox if he uses version 8.36 at home or it is his pc at his work.

Sorry friend.
Regards.

nikita
28/11/2016, 18h10
I have tried this on a number of machines without a problem. I hope you did not make changes in "AWRoot".

Restore your backup copy of "APPDIAG.SYS", if it still does not work, then restore the old APP folder and restore APPDIAG.SYS.

Please provide me with your setup details and what did you try, I will try to replicate what you have done to see what is the problem.

i's ok now

nany
28/11/2016, 18h21
Does Anyone Know if the version 8.36 is available to download now ?


Envoyé de mon iPhone en utilisant Tapatalk

nany
28/11/2016, 18h22
Maitrsox peut-tu nous dire si elle est disponible la 8.36 . Merci


Envoyé de mon iPhone en utilisant Tapatalk

BILAUTO
28/11/2016, 18h45
ou télécharger la 8.36

Ya til un crack

nikita
29/11/2016, 06h29
salut
maitresox ne donne plus c'est mise a jour elles ont etait mis a vendre depuis plus de maj.

Simple
29/11/2016, 10h30
Thanks maitresox,
I am not sure I understand PSA's procedure with respect to updates and their availability.

I downloaded "inter8_36.rar" last week, the French site announced it on Tuesday while it is still not announced on the English site!!!

However, for the past 3 days, it is no longer available for download. I hope they did not discover a bug that necessitated pulling it back.

PSA pulled back 8.36 and today they released 8.37, it must have been buggy.. Now the sequence goes ..inter8_32, 33, 35, 37.. However, it still says 8.36 is the latest on their site.

nikita
29/11/2016, 11h24
simple
Can you give us the 8.37 or not?

Simple
29/11/2016, 13h12
Of course I can and I will, I am sorry I don't speak French, but I participate in this forum to exchange information, contribute and gain knowledge!!..

Please notice that this is the original PSA file, using it as is may render your system unusable. I might compile a Lexia and PP2000 update when I have time..

There you have it:

nany
29/11/2016, 14h31
So, this update is insu able for clone interface !


Envoyé de mon iPhone en utilisant Tapatalk

Simple
29/11/2016, 17h15
Yes it works with clones, I also have a VCI clone.

I have just finished packaging APP folder update from 8.17 to 8.37 and 8.35 to 8.35. I will mail them to DIAGAUTO33 and nikita first so that they can try them and feedback before posting them..

Simple.

nany
29/11/2016, 18h46
Okay MR simple and i want to be the One of the person who can do the test . Thx


Envoyé de mon iPhone en utilisant Tapatalk

nikita
29/11/2016, 20h15
maj 8.35 et 8.37 ok parfait
Merci a Simple pour ces mises a jours
Marche nickel pour moi
++

DIAGAUTO33
29/11/2016, 20h25
Merci Simple pour votre travail. Je teste ça demain.




Envoyé de mon ASUS_Z00AD en utilisant Tapatalk

nany
29/11/2016, 23h45
Thx mate, i Will test it tomorrow .


Envoyé de mon iPhone en utilisant Tapatalk

DIAGAUTO33
30/11/2016, 07h03
Sur le site service box, ils parlent bien de la maj 8.36 ...

Je pense que la 8.36 et la 8.37 sont des correctifs pour diagbox surtout car vu les véhicules cités dans la news.

En tous cas, un énorme merci à Simple pour son travail.
Grace à lui, on peut profiter d'un diagbox amélioré !

Je test la nouvelle version aujourd'hui puis je fais un rapport chef !
@+

DIAGAUTO33
30/11/2016, 11h09
Résultats test :

307 pp2000, mesure parametres, lecture def , télécodage sur tous les calculateurs = OK

c3 lexia, mesure parametres, lecture def, differents télécodage sur un peu tous les calculateurs = OK

J'ai fais éga

DIAGAUTO33
30/11/2016, 11h11
J'ai fais également lecture def et parametres sur une 308 t9 sous diagbox et tout OK pour le moment.

Super travail encore une fois Mr Simple !

rosaire974
30/11/2016, 14h14
slt diagauto33 tu as installé la 8.36 ou la 8.37

nikita
30/11/2016, 18h38
slt diagauto33 tu as installé la 8.36 ou la 8.37
moi les 2 d'abord la 35 et après la 37

DIAGAUTO33
30/11/2016, 19h32
Pareil pour moi. Maintenant c'est la 8.37

Envoyé de mon ASUS_Z00AD en utilisant Tapatalk

samii1955
01/12/2016, 10h50
bonjour DIAGAUTO33
As tu essayé le télécodage sur des véhicules réçents
cordialement samii1955

DIAGAUTO33
01/12/2016, 20h02
Salut, tu veux dire du telecodage sous diagbox ?
Depuis les maj de simple, non.
Mais j'ai déjà fais des telecodage sous diagbox juste avant les maj de simple et ça fonctionné. Je pense pas que ces maj touche aux fonction de diagbox...
Je test des que je peux sous diagbox et je fais un retour.

Envoyé de mon ASUS_Z00AD en utilisant Tapatalk

samii1955
02/12/2016, 18h21
merci et bon WK

guyguy307
22/01/2017, 17h31
salut simple

j'ai installer le update.

je suis win7pro 32

dbox 8.17

diagbox fonctionne ok

pp2000 ne fonctionne toujours pas il donne le message "pp2000 est maintenant désactiver de ce pc"

que faut t'il faire .

merci

Simple
23/01/2017, 00h20
Hello,

I think your problem is due to the fact that you have not edited the version statement from 8.xx to 7.xx in the file VERSION.INI. You probably have version=8.17.

Navigate to "C:\AWRoot\bin\fi\" and edit the file "version.ini" such that it reads:
--------------------------

[APPLICATION]
Version=07.817

--------------------------

Save and exit and try again..

I like the last 3 digits to indicate which DiagBox I am really running. For example, if I am running DiagBox v8.38, then my version.ini will have the lines:

[APPLICATION]
Version=07.838

This allows Lexia and PP2000 to run flawlessly and reflects the proper software version.

Good luck.

guyguy307
23/01/2017, 05h55
Bonjour simple

merci pour les éxplication .

Je regarde cela est te fait un retour.

merci

guyguy307
24/01/2017, 17h38
bonjour simple

j'ai toujours le même message d'erreur "pp2000 est maintenant désactiver de se pc"

j'ai : "C:\AWRoot\bin\fi\" et dans "version.ini" :


[APPLICATION]
Version=07.817

merci

Simple
24/01/2017, 19h27
You are saying that you had DiagBox 8.17 installed, is Lexia working or is it also disabled?
- Did you install start with DiagBox 7.01/02 then updated to 7.57 or what?
- Was DiagBox 7.xx working?
- Did you install DiagBox 8 in accordance with the procedure?
- Do you have .Net 3.51 and VC++ 2008 installed?
- Were DiagBox 8.01 and Lexia + PP2000 working?

Can you explain what did you install and what was working? and at what stage things go wrong?

guyguy307
24/01/2017, 19h57
Hello Simple

I have installed diag box 8.17 which works perfectly.

I left the installation 7.01 ...... 7.62

Followed the procedure without any problem to install diagbox 8.01 .... 8.17

I use it every day on vehicles after 2013 is perfect.

When I switch to version 7 by renaming app7 to app diagbox 7 also works as well as pp2000.

Regarding lexia I do not know because the oldest citroen that I repair is after 2010 so I is not the opportunity to testate lexia.

498/5000
I am on win7 32 disk ssd processor i5 4 gb ram, i also have another pc win7 32 i3 ssd and 4gb ram with diagbox 7.62 on which pp2000 works wonderfully. The iso to use is the same are the same On the 2pc

I do not use it everyday because I can of old vehicles except some 307 ph1.

That's why built-in pp2000 to 8.17 interests me a lot.

Something must escape me but I do not understand :)

Thank you for your precious help and your kindness. and sorry for my bad english.

Simple
24/01/2017, 20h36
You are welcome and don't worry about the English, it is good..
If you had 8.17 already and it was working with PP2000, then what you needed is the APP v8.35 folder, this is for people who want to leave their DiagBox 7.82/3 and update PP2000 and Lexia.. You need this:
http://www.tlemcen-electronic.com/forum/showpost.php?p=481050&postcount=1

But you can also try renaming your APP folder to APP8 and copying the APP 35 again as per the procedure in the first post. Just make sure that you run the "Kill_DiagBox_Tasks.bat" as Administrator twice to ensure all processes are stopped.

Lexia and PP2000 will only run on 32 bit based systems, they rely on DiagBox but they need the version to be 7.

I am not sure if you need to reinstall, but I hope you don't.

guyguy307
24/01/2017, 20h56
Thank you simple, rename app / app8 is already done.

I test the rest of your procedure and I give you a quick feedback. cordially.

guyguy307
24/01/2017, 21h29
Hello

I tried :

App and app8 install

Stop application 2 faith

Installing app update 8.17 8.37

I switch off and on again

Replace my app sys

And when I run diagbox

Message error update internet not taken aen account please contact the hotline.

And for that diagbox to work again I need to restart maj update 8.14 / 8.17 and the diagbox works again, but pp2OOO no

thank you

Simple
24/01/2017, 21h52
Are you running DiagBox as Administrator?
You cannot rename APP to APP8 and install updates, because there is no APP folder to be updated. This renaming is to enable you to replace your APP folder with the one that have all updates up to 8.35..

So install APP 835 and see if it works before up****** to v838

Simple
24/01/2017, 22h16
Installing APP-835 (the files are in the attachment of the first post of this thread) like this:

1- Use the attached “Kill_DiagBox_Tasks.bat” to stop all DiagBox’s processes.
2- Rename your current “C:\APP” folder to “C:\APP8”
3- Extract the downloaded APP-835.7z to “C:\” so that you have “C:\APP”
4- Restart your computer and run DiagBox as usual.

If all goes well, then you can update to 8.38 using the attachment in this post:
http://www.tlemcen-electronic.com/forum/showpost.php?p=485185&postcount=16

Good Luck.

repcles
24/01/2017, 23h00
bonjour a tous , la mise a jour 8.36 , peut vous bloquez votre diagbox , passer directement 8.37,sinon je peux fournir correctif, pour la 8.36.

Simple
24/01/2017, 23h11
I forgot to say that before you start DiagBox, navigate to "C:\AWRoot\dtwr\updt\" and delete all contents of the updt folder. Otherwise, it will attempt to update the failed updates that you tried earlier.

When you run Kill_DiagBox_Tasks.bat run it as Administrator, also run DiagBox as Administrator and make sure that your network is disconnected.

P.S. Try PP2000 and Lexia after installing APP-835 (you don't need to connect to a car, try manually a111111111111111 as VIN and 11111 as RPO).

Simple
24/01/2017, 23h13
Do NOT use 8.36, it was pulled back by PSA and 8.37 + 8.38 were replacement and updates.

guyguy307
25/01/2017, 20h51
Hello Simple;

I have a new app 2 times and launcht update 835

Off and on again pc

And always the same error message.
So I restopper the application and delivered maj 814/817
For diagbox to work.

I restop 2 faith the application and made a copy of the complete files lexia and outilrep situate in app 7 and copy in app and in app8 and restart the update.

And always the same problem "error the gold of the update, contact the hotline"

So i quit 2 faith application and reboot maj 814 817

And diagbox v8.17 works but pp2000 still does not work.

thank you

Simple
25/01/2017, 23h05
if you still have AWRoot7 folder, you can try running "AWRoot_v7_Conf+Ativation_v8.exe" from here:

http://www.tlemcen-electronic.com/forum/showpost.php?p=481061&postcount=1

Usually there is no problem with Lexia and PP2000 because they get the authentication from DiagBox, but you are saying that DiagBox is fine, otherwise I would have suggested that you restore APPDIAG.SYS.

If nothing works, I would suggest that reinstall from the beginning. If you still have AWRoot7, then you can delete APP and AWRoot and APP folders and start DiagBox installation. If not, then you need to start from 7.01.

guyguy307
26/01/2017, 06h00
Hello Simple

I am conservative :)

I have always awroot 7 yes

I'll start copying file with
"AWRoot_v7_Conf + Ativation_v8.exe",
Replace the sys app, restart the update and
I tell you her. I have a lot of work today I would see tonight.

Thank you very much for your inversation you are 5 stars;)

Simple
26/01/2017, 10h50
First restore "APPDIAG.SYS" and make sure that your (AWRoot\bin\fi\cache\ folder has files) and start DiagBox, if it works, then that's it..

If the above does not work,

2- Run "Kill_DiagBox_Tasks.bat" as Administrator, then run "AWRoot_v7_Conf + Ativation_v8.exe". restart the computer and run DiagBox.

If the above does not work,

3- Run "Kill_DiagBox_Tasks.bat" as Administrator, Remove all APP folders and remove AWRoot folder (DO NOT remove AWRoot7 folder) and start installing DiagBox 8 (without installing 7.01 and 757)

guyguy307
26/01/2017, 20h52
Simple greeting

I deleted app app7 app 8 and awroot.

I reboot iso db8 and re install 8.01

Diagbox 8.01 works.

I restop the application and rename app in app8 and copy app file from app-835

Diagbox 8.01 always works ok, but pp2000 and lexia still does not work.

thank you

Simple
26/01/2017, 21h00
Do you have .NET 3.5 and VC++ 2008 installed?

guyguy307
26/01/2017, 21h33
Yes and svg viewer

Simple
30/01/2017, 23h37
The solution to this problem was as expected from the beginning, removing or commenting "version=08.xx" in "version.ini" and setting it to "version=07.xx" resolves the issue with Lexia and PP2000, like this:

[APPLICATION]
Version=07.817

This is explained in the DiagBox 8.01 Installation (updated) thread under Versions.

However, there is an interesting point here. When the option "Hide extensions for known file types" in the File Manager menu is checked, then file extensions do not show. In this case the user may be editing a file named "version.ini.txt" which will not work.

Hence, ensure that the option "Hide extensions for known file types" is unchecked so that you see file extensions.

Simple
01/02/2017, 19h26
DiagBox 7.xx ends at 7.77. the rest is made up.. but if you insist, it virtually be 07.102

But you can enter 07.838 and it will work fine and it will give accurate indication of your DiagBox v8.

SASIKO
25/11/2018, 21h25
Merci pour ce tuto complet