citroen

[Volik8]

Hello, you need to disable the immobilizer on Citroen, can someone help?
ecu bosch edc17c10

[zouaoui mohamed]

Hi post your file you can help

[Volik8]

Help guys please !!!

[Volik8]

Hello !! Can someone help

[yann3]

like that and go back
forget not thank you
paas ,mp

[Bemich]

Please post Résulta Volik8

[Volik8]

Hello colleagues, the car started but there is a problem, the bsi unit does not understand that the car is running, and the wipers do not have anything working ...
there is an error in the bsi block by immobilizer, please correct the dump bsi

[yann3]

Hi, I do not see the relationship between ecu engine and bsi
when making an ecu immobilizer, do not touch the bsi.
the problem is probably

[kitopa]

Volik8 your problem was the BSI i guess. When there is communication problem, the BSI stay in economy mode, and even if the car is running, the BSI don't see that. Check wires, and consider changing BSI.

[yann3]

Hi
the car did not start after a worry bsi, probably.immo off put the engine back into operation, but can not do anything for the bsi.
you have to change the bsi and you swap eeprom

salut
la voiture ne demarrait pas suite a un soucis bsi,probablement.l´immo off a remis le moteur en fonctionnement ,mais ne peut rien pour le bsi.
il faut que tu change le bsi et tu swap l´eeprom

[Volik8]

Volik8 your problem was the BSI i guess. When there is communication problem, the BSI stay in economy mode, and even if the car is running, the BSI don't see that. Check wires, and consider changing BSI.

Hello to all !!
Replaced BSI The problem remained !!!
BSI does not see the engine running, BSI remains in economy mode.
Electric power steering also does not work.
The battery charging light is on when the engine is running. Errors in the engine control unit
U1401
U1218
U1213
What to do???

[yann3]

Hi
control the bus can h and ldu abs box, surely him that prevents communication between bsi, engine ECU and power steering.
so shunt the can h and l of the abs case

---------- Post added at 08h53 ---------- Previous post was at 08h52 ----------

Hi
control bus can h and l of the abs box, surely it prevents communication between bsi, engine ECU and power steering.
so shunt the can h and l of the abs case

[yann3]

as said ggvaniou, you will need the eeprom too
https://www.tlemcen-electronic.com/forum/showthread.php?t=81606

[mexicain]

Hello test