S'identifier

Voir la version complète : Renault Master 0 281 011 940 immo off


hugopinho
02/01/2020, 21h14
Hi friends

I have a Renault Master, 2.5 dci, 100 cv, 2003

I need immo off for the ECU please

BOSCH 0 281 011 940

95P08 eeprom

Best Regards

hugopinho

akasa67
02/01/2020, 21h16
Slt l ami voilà ce qui faut faire
https://youtu.be/pNqBTzp7MVc

hugopinho
05/01/2020, 22h23
Hi

I've already seen the tutorial https://youtu.be/pNqBTzp7MVc and understood all the steps. my question is if the switch is needed and if it has to be turned on every time the car is started.
it is not enough to cut the plug

anyone can help me

Regards

hugopinho

akasa67
05/01/2020, 22h38
You can do the off on the table and shunt the can on the uch, you don't need the button every time.

cristi_ony
05/01/2020, 23h01
you r ecu is edc 15c3?

techtronic1
05/01/2020, 23h09
you r ecu is edc 15c3?
Her ecu is edc15c13

cristi_ony
05/01/2020, 23h15
The problem on these is usually the key read 93c46 in immo unit and use gambit or zed bull to produce transponder from dump

akasa67
05/01/2020, 23h17
The problem on these is usually the key read 93c46 in immo unit and use gambit or zed bull to produce transponder from dump

Slt tu et a l ouest le calculateur et bien un edc15c13 et non edc15c3 il a un uch et non un immobox donc rien à voir cordialement.

cristi_ony
05/01/2020, 23h25
Immo off on this renault master was done
I made 95P08 virgin and solder renault emulator inside the ecu,cut the immo line wire conector A (the small one) pin G2, put the ecu back on the car, ignition on for 30sec.,then off for 30seconds (repead this 5 times),then start the car

---------- Post added at 11:25 PM ---------- Previous post was at 11:18 PM ----------

read 93c66 memory from uch and use RenaultPinExtractor to find the code and rewrite the keys

cristi_ony
05/01/2020, 23h34
virgin file and photo emulator

akasa67
05/01/2020, 23h54
Tu lui a mise une couverture sur l émulateur lol non sa n'a rien à voir lui et en can....

xboss94
10/03/2024, 04h36
Bonjour j'ai exactement le même soucis sur un master 2.5 EDC15C13 la solution avec émulateur by JULIE on doit systématiquement toucher les câbles avant démarrage ou seulement la première fois pour l'apprentissage du vin dans l'émulateur ? Aucune idée de comment sa fonctionne leur systéme de devoir couper la linhe CAN L et CAN H

yann3
10/03/2024, 10h32
il faut mettre un switch sur canL
Ca arrive regulierement de falloir couper le canpour demarrer

bassh
10/03/2024, 12h42
Interrupteur obligatoire oui. La joie des Renault en immo.