Envoyé par Alessiapia14 (Message 682366)

Pouf info xentry passthru tourne sur Windows 32 bits avec une smart 451.480c ok, d'autre j'attend pour faire un retour.

Envoyé par Roturbo (Message 616447)

.

64bit drivers for Actia Passthru+ XS (1 gen yellow & blue interface).


Maybe the first release on the World Wide Web, the old VC1 from Actia
IS working as J2534 on 64bit Windows 7. :wink:

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
You are the only one to blame if something goes wrong, so first make backup of important data,
or test this instructions first inside a Virtual Machine or any testing PC.

Remember, i don´t have responsibility of any kind, any problem you solve it,
i have test it and it works, and it is free for you to test,, only IF YOU WANT.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Instructions (please follow the more detailed installation inside RAR file)..

No need to disable Anti_Virus, and i strong advise you to do a virus scan on this folder.

This modified drivers are only to work as PassThru under 64bit,
it will not work with Actia Multidiag software, because the interface
is not recognized, for Multi-Diag Actia-Connect use a 32bit OS.


1º install --I+ME-Actia-PassThru-XS-Driverpack-xx1--
2º install --I+ME-Actia-PassThru-XS-Driverpack-xx2--

Go to device manager and chose update drivers for Passthru+ XS,
chose ""Browse my computer for driver software""

((.........))

Than click "NEXT" it will give you driver warning, press "Yes",,
it will open a red windows security about the publisher, just
click ""Install this driver software anyway""

It will confirm Updated Driver software success, next remove power from
the interface, power it up again, if asking again for drivers just repeat
one more time the process,, if you see the serial number on the driver name ,
power down, power up install driver,and is done.

If this software "I+ME-Actia-PassThru-XS-Driverpack-xx1" is not installed than
your interface will not be listed as a PassThru interface, so you must install it.

This way you will have the 1Gen interface (blue & yellow) listed as available
for any software working with passthru (under 64bit), just select it and start working.


Tested several times in Windows 7 64bit, communication confirmed with
Forscan, Xentry, etc.

Probably there is easy ways to do the same, but this was the fastest i have
discovered by myself, and works without problems.

Also i have Vas5054 working on 64Bit, but is on testing, the xentry
picture show it listed on the available Passthru interfaces (last picture).


http://i68.tinypic.com/of1zj5.jpg
http://i67.tinypic.com/2ccqgwk.jpg
http://i63.tinypic.com/2lk7n9x.jpg

----------------------------------------------------



You can download the Pictures-mega-link if this ones vanish (no pass),
for the Mega-link.rar PASSWORD you need to follow the next instructions.



First you press http://www.tlemcen-electronic.com/fo...reputation.gif and than http://www.tlemcen-electronic.com/fo...ost_thanks.gif ,, next send PM with title
-64bit drivers for Actia Passthru+ XS-password-

And you will get BY PM the password for Megalink.

DO NOT ASK THE PASSWORD ON THE BOARD.

Password Pm= Thanks+Rep


ROTURBO.

Envoyé par zenata (Message 633047)

Bonsoir
A propos du driver actia passthru 64 bit
j'ai essayé sur windows 10 64 bit , ca ne marche pas
par contre sur windows 7 64 bit et 32 bit , impeccable
donc j'ai monté deux machines virtual box
pour xentry 2018 , une en 64 bit et une en 32 bit , pour comparer
les diags (communication)
merci beaucoup Roturbo , il fallait avoir l'idée , l'astuce !!!!!!!!!

Envoyé par NOVAG (Message 1045565)

Salut,

J'ai récupéré une VCI Actia gen 1 originale par contre impossible de trouver le driver x64 à chaque fois les liens mega sont expirés, est-ce que quelqu'un aurait ça dans son pc?

Merci beaucoup d'avance.

Envoyé par NOVAG (Message 1045585)

Salut,
J'ai retrouvé le mot de passe pour le fichier dont tu avais besoins je viens de te l'envoyer par MP.

C'est ça sonde jaune et bleu dans une malette Actia avec pleins d'adaptateurs différents.

Envoyé par NOVAG (Message 1045663)

oui mais si j'ai bien compris en 64 bit on ne peut utiliser l'interface qu'en mode Passthru sur des softs comme Xentry, Forscan .... si on veut utiliser Multidiag avec la VCI I il faut une VM avec un windows en 32 bit c'est bien ça ?