Tlemcen Car electronics

Tlemcen Car electronics (https://www.tlemcen-electronic.com/forum/)
-   Compteur kilométrique (https://www.tlemcen-electronic.com/forum/forum13/)
-   -   aide kilomatrage P 307 HDI 2.0 (https://www.tlemcen-electronic.com/forum/compteur-kilom-trique/100-aide-kilomatrage-307-hdi-2-0-a.html)

cyril34070 07/05/2010 11h42

combien elle a actuellement

cyril34070 07/05/2010 11h47

dans les 3 type g aucun km bizarre

cyril34070 07/05/2010 11h55

avec quoi ta estrait le dump ta un programmer i me faudrait ton dump en 8 et 16 bit

cyril34070 07/05/2010 12h09

je pense que ton dump a mal etait lu

cyril34070 07/05/2010 12h12

meme immokiller me dit Peugeot 307/BSI - MEM 95160 decoder loaded!
95160 programmer module loaded
New File loaded
Searching ...
Searching ...
Wrong/corrupted file or new algorithm

mecano70 07/05/2010 12h39

je lit avec peugeot code et je vois GLQ1 mais rien avec immokiller
mais je ne vois pas de Km la bsi a 240000 km environ le gg a monté une occasion et cela a décalé le compteur
fab

cyril34070 07/05/2010 12h43

i faut que tu dessoude ton eeprom est que tu le lise avec un programmer après je te le fait san probleme je part bossè on ce capte plus tard si tu peu regarde mon immo sa serait cool a plus tard

cyril34070 07/05/2010 12h46

g rien dans celui que tu ma envoyè ya un souci t sur que c un 95160

cyril34070 07/05/2010 12h48

tu lit l eprom ou tu le lit sur la voiture par obd

mecano70 08/05/2010 00h51

yes il y a une seul eprom 95160 dans la bsi je prends une photo lundi as tu essayé le dump de l immo audi
fab

cyril34070 08/05/2010 12h15

quel dump g que mon dump d originne d ayeur j aimerai le modifier pour le mettre off mais je c pas quoi faire je te les envoyè en 8BIT et 16BIT

cyril34070 08/05/2010 13h54

Car type: Peugeot 307 Dash+BSI - 68HC912DG128 - 2002 year
The mileage is stored in the next lines:
0670: xx xx xx xx xx xx xx xx FF F0 AD CF xx xx FF F0
0680: AD CF xx xx FF F0 AD CF xx xx FF F0 AD CF xx xx
0690: FF F0 AD CF xx xx FF F0 AD CF xx xx FF F0 AD CF
06A0: xx xx FF F0 AD CF xx xx xx xx xx xx xx xx xx xx
where the next bytes:
FF F0 AD CF - is a mileage

Instruction: read the 68HC912DG128 chip from the BSI (Valeo), and
edit the mileage as shown here. Then connect dash to the connectors .
on the car WITHOUT the BSI. Put the key to the ignition, but do not start!!!
just power on the dash. Dash value will self deletes.
After this connect the BSI and km value will be automatically loaded from BSI to dash.

cyril34070 08/05/2010 13h57

tacho soft dit qu il faut que tu programme le 68HC912DG128 la cryptographie ce fait peut être pas seulemnet sur le 95160 c peut être comme les nouvel audi qui utilise un processeur plus un eprom les donnée son partagé entre les deux pour rendre la programation soi disan quazi impossible


Fuseau horaire GMT +1. Il est actuellement 21h16.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Version française #23 par l'association vBulletin francophone
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Tlemcen-electronic © All right reserved