![]() |
![]() |
#1 |
Membre trés attaché
![]() Date d'inscription: juin 2021
Localisation: France, Nice
Âge: 37
Messages: 784
Thanks: 1
Thanked 1 930 Times in 475 Posts
Pouvoir de réputation: 24 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Cummins InPower Pro 14
InPower provides the following functions for monitored equipment: • Direct connection capability from a personal computer to PowerCommand genset controls, transfer controls, and system controls; For details on devices supported refer Technical Details tab. • Allows the monitored equipment to send alarm information to a connected computer. • Configurable for units of measurement, and level of user access (read only, read/change values, administrator). • Adjustment of nearly every adjustment parameter within the connected control system, including parameters such as voltage and frequency levels, gains, protection set-points and other values. • Convenient programming of configurable inputs in the controllers. • Viewing of equipment history, fault codes, and data associated with fault codes. • Generates reports of monitored data • Allows released firmware upgrades on Power Command genset controls. • Plot critical parameters in a strip chart format, and export data to 3rd party software tools for manipulation and viewing. • Simulate fault conditions in genset controls in compliance to NFPA 110 requirements to demonstrate functionality of the controller and monitoring equipment in a facility. ![]()
__________________
I will install diagnostic/auto repair programs, and select diagnostic/chip tuning equipment. |
![]() |
![]() |
The Following User Says Thank You to Aleksey-MS For This Useful Post: | darkboybeyond (02/12/2023) |
![]() |
#2 |
Membre trés attaché
![]() Date d'inscription: juin 2021
Localisation: France, Nice
Âge: 37
Messages: 784
Thanks: 1
Thanked 1 930 Times in 475 Posts
Pouvoir de réputation: 24 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
The link was updated
__________________
I will install diagnostic/auto repair programs, and select diagnostic/chip tuning equipment. |
![]() |
![]() |
![]() |
#3 |
Membre trés attaché
![]() Date d'inscription: juin 2021
Localisation: France, Nice
Âge: 37
Messages: 784
Thanks: 1
Thanked 1 930 Times in 475 Posts
Pouvoir de réputation: 24 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Cummins InPower Pro 14
InPower provides the following functions for monitored equipment: • Direct connection capability from a personal computer to PowerCommand genset controls, transfer controls, and system controls; • Allows the monitored equipment to send alarm information to a connected computer. • Configurable for units of measurement, and level of user access (read only, read/change values, administrator). • Adjustment of nearly every adjustment parameter within the connected control system, including parameters such as voltage and frequency levels, gains, protection set-points and other values. • Convenient programming of configurable inputs in the controllers. • Viewing of equipment history, fault codes, and data associated with fault codes. • Generates reports of monitored data • Allows released firmware upgrades on Power Command genset controls. • Plot critical parameters in a strip chart format, and export data to 3rd party software tools for manipulation and viewing. • Simulate fault conditions in genset controls in compliance to NFPA 110 requirements to demonstrate functionality of the controller and monitoring equipment in a facility. ![]() Need it? Push buttons Rate (Reputation) and Thanks, PM for pass.
__________________
I will install diagnostic/auto repair programs, and select diagnostic/chip tuning equipment. |
![]() |
![]() |
The Following 2 Users Say Thank You to Aleksey-MS For This Useful Post: | BAB62 (30/12/2022), darkboybeyond (02/12/2023) |
![]() |
#4 |
Membre habitué T-E
Date d'inscription: novembre 2018
Localisation: France, gravelines
Âge: 37
Messages: 118
Thanks: 174
Thanked 121 Times in 60 Posts
Pouvoir de réputation: 7 ![]() ![]() |
![]()
Hi my friend,
Many thanks for your soft, but i think 90 percent of people on this forum Will not use this Last one. i know some people who works with Cummins motors [emoji6]. If you have same for caterpilar i take[emoji6]. Have a Nice day. Envoyé de mon SM-A125F en utilisant Tapatalk
__________________
un petit thanks, please :) |
![]() |
![]() |
![]() |
#5 |
Membre trés attaché
![]() Date d'inscription: juin 2021
Localisation: France, Nice
Âge: 37
Messages: 784
Thanks: 1
Thanked 1 930 Times in 475 Posts
Pouvoir de réputation: 24 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
The link was updated
__________________
I will install diagnostic/auto repair programs, and select diagnostic/chip tuning equipment. |
![]() |
![]() |
![]() |
#6 |
Membre trés attaché
![]() Date d'inscription: juin 2021
Localisation: France, Nice
Âge: 37
Messages: 784
Thanks: 1
Thanked 1 930 Times in 475 Posts
Pouvoir de réputation: 24 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
added Cummins InPower Pro 14.5 (installation files)
__________________
I will install diagnostic/auto repair programs, and select diagnostic/chip tuning equipment. |
![]() |
![]() |
The Following User Says Thank You to Aleksey-MS For This Useful Post: | darkboybeyond (02/12/2023) |
![]() |
#7 |
Membre Non Confirmé
Date d'inscription: mars 2024
Localisation: Paris
Âge: 47
Messages: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Pouvoir de réputation: 0 ![]() |
![]()
The link was updated
|
![]() |
![]() |
Sponsored Link |
![]() |
Liens sociaux |
|
|
![]() |
||||
Discussion | Auteur | Forum | Réponses | Dernier message |
Cummins Insite 8.8. 8.7, 8.5.2 - Mega + Cummins Incal (without pass) | Aleksey-MS | Cummins | 4 | 05/11/2023 15h40 |
cummins | pinceau | cimetière de présentation | 1 | 02/09/2019 19h45 |
BMW ISTA 4.13.3x Installation Files | Truc | BMW | 1 | 08/10/2018 15h34 |
Inpower 11.5 FULL | mod-files.com | Autres marques | 5 | 31/03/2017 19h31 |