si vous avez été banni pour une raison de spam sur le forum (hacked account) c'est parce que votre compte a été utilisé par des Bots, merci d'envoyer un message via le formulaire de contact en bas de cette page afin de récupérer votre compte, les messages/discussions supprimés ne seront malheureusement pas restaurés.

Aleksey-MS · 03/08/2022, 19h49

Cummins InPower Pro 14

InPower provides the following functions for monitored equipment:
• Direct connection capability from a personal computer to PowerCommand genset controls, transfer controls, and system controls; For details on devices supported refer Technical Details tab.
• Allows the monitored equipment to send alarm information to a connected computer.
• Configurable for units of measurement, and level of user access (read only, read/change values, administrator).
• Adjustment of nearly every adjustment parameter within the connected control system, including parameters such as voltage and frequency levels, gains, protection set-points and other values.
• Convenient programming of configurable inputs in the controllers.
• Viewing of equipment history, fault codes, and data associated with fault codes.
• Generates reports of monitored data
• Allows released firmware upgrades on Power Command genset controls.
• Plot critical parameters in a strip chart format, and export data to 3rd party software tools for manipulation and viewing.
• Simulate fault conditions in genset controls in compliance to NFPA 110 requirements to demonstrate functionality of the controller and monitoring equipment in a facility.

Aleksey-MS · 03/11/2022, 09h07

The link was updated

Aleksey-MS · 30/12/2022, 19h42

Cummins InPower Pro 14

InPower provides the following functions for monitored equipment:
• Direct connection capability from a personal computer to PowerCommand genset controls, transfer controls, and system controls;
• Allows the monitored equipment to send alarm information to a connected computer.
• Configurable for units of measurement, and level of user access (read only, read/change values, administrator).
• Adjustment of nearly every adjustment parameter within the connected control system, including parameters such as voltage and frequency levels, gains, protection set-points and other values.
• Convenient programming of configurable inputs in the controllers.
• Viewing of equipment history, fault codes, and data associated with fault codes.
• Generates reports of monitored data
• Allows released firmware upgrades on Power Command genset controls.
• Plot critical parameters in a strip chart format, and export data to 3rd party software tools for manipulation and viewing.
• Simulate fault conditions in genset controls in compliance to NFPA 110 requirements to demonstrate functionality of the controller and monitoring equipment in a facility.

Need it? Push buttons Rate (Reputation) and Thanks, PM for pass.

BAB62 · 30/12/2022, 19h51

Hi my friend,
Many thanks for your soft, but i think 90 percent of people on this forum Will not use this Last one.
i know some people who works with Cummins motors [emoji6].
If you have same for caterpilar i take[emoji6].
Have a Nice day.

Envoyé de mon SM-A125F en utilisant Tapatalk

Aleksey-MS · 22/09/2023, 14h38

The link was updated

Aleksey-MS · 22/09/2023, 14h56

added Cummins InPower Pro 14.5 (installation files)

mihv · 06/03/2024, 14h21

The link was updated

Aleksey-MS · 29/07/2024, 11h11

New working link

30/12/2022, 19h51	#4
BAB62 Membre habitué T-E Date d'inscription: novembre 2018 Localisation: France, gravelines Âge: 38 Messages: 127 Thanks: 188 Thanked 137 Times in 64 Posts Pouvoir de réputation: 8	Hi my friend, Many thanks for your soft, but i think 90 percent of people on this forum Will not use this Last one. i know some people who works with Cummins motors [emoji6]. If you have same for caterpilar i take[emoji6]. Have a Nice day. Envoyé de mon SM-A125F en utilisant Tapatalk __________________ un petit thanks, please :)

22/09/2023, 14h38	#5
Aleksey-MS Membre trés attaché Date d'inscription: juin 2021 Localisation: France, Nice Âge: 38 Messages: 937 Thanks: 1 Thanked 3 122 Times in 956 Posts Pouvoir de réputation: 36	The link was updated __________________ I will install diagnostic/auto repair programs, and select diagnostic/chip tuning equipment.

Discussions similaires
Discussion	Auteur	Forum	Réponses	Dernier message
Cummins Insite 8.8. 8.7, 8.5.2 - Mega + Cummins Incal (without pass)	Aleksey-MS	Cummins	7	30/01/2025 10h17
cummins	pinceau	cimetière de présentation	1	02/09/2019 19h45
BMW ISTA 4.13.3x Installation Files	Truc	BMW	1	08/10/2018 15h34
Inpower 11.5 FULL	mod-files.com	Autres marques	5	31/03/2017 19h31

06/03/2024, 14h21	#7
mihv Membre Non Confirmé Date d'inscription: mars 2024 Localisation: Paris Âge: 48 Messages: 6 Thanks: 0 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	The link was updated