08/10/2019, 20h22 | #1 |
Membre accro
Date d'inscription: novembre 2018
Localisation: France land
Messages: 1 023
Thanks: 4 795
Thanked 2 768 Times in 750 Posts
Pouvoir de réputation: 34 |
İnterface Passthru DICE J2534-1 et J2534-2
Salut les amis
Cette interface "DICE" m'intéresse pour l'utiliser en mode Passthru avec d'autres soft compatible J2534-1 et -2. Vu que le programme Vida demande le mode J2534-2 cela voudrait logiquement dire que ce câble le possède "?" Ma question pour les connaisseurs possédant ce câble : L'avez vous essayer avec d'autres soft ? Si oui, le mode J2534-2 était-il opérationnel ? Je continue les recherches.... en tout cas si compatible avec d'autres soft en mode -2 cela serait l'outil le moins chère en mode full PassThru +/- Merci d'avance. @+
__________________
"Ne pas faire aux autres ce que l'on ne veux pas que les autres te face" |
The Following 2 Users Say Thank You to ElTurco For This Useful Post: | autodiagauto (05/07/2023), klif26 (08/10/2019) |
08/10/2019, 20h46 | #2 |
Fidèle à T-E
Date d'inscription: août 2017
Localisation: France. Lyon
Âge: 40
Messages: 2 748
Thanks: 2 905
Thanked 5 097 Times in 2 114 Posts
Pouvoir de réputation: 61 |
Salut l’ami,
Cantiecar ne te suffis pas Envoyé de mon iPhone en utilisant Tapatalk ---------- Post added at 19h46 ---------- Previous post was at 19h44 ---------- https://www.tlemcen-electronic.com/f...ad.php?t=34036 Il dise compatible passthru dans le thread !! Envoyé de mon iPhone en utilisant Tapatalk
__________________
No clic thanks ,No clic Reputation ,pas d'aide! |
The Following User Says Thank You to Alessiapia14 For This Useful Post: | ElTurco (08/10/2019) |
08/10/2019, 22h12 | #3 |
Membre accro
Date d'inscription: novembre 2018
Localisation: France land
Messages: 1 023
Thanks: 4 795
Thanked 2 768 Times in 750 Posts
Pouvoir de réputation: 34 |
Salut Alessiapia14
Merci pour ton intervention, j'ai envoyé un message au revendeur cantiecar (à la source) pour demander des infos sur l'activation du mode PT uniquement au prix de 175$ (vu sur leurs site) mais aucune réponse de leurs part :( D'où ma recherche de câble compatible mode -1 et -2, je sais qu'il est compatible pour d'autres soft en PT d'après mes lectures mais aucun info trouvé sur le mode -2 quoi que si -1 est ok c'est que le -2 doit aussi l'être, toujours dans la logique, je crois que je vais tenter pour tester. Merci en tout cas. @+
__________________
"Ne pas faire aux autres ce que l'on ne veux pas que les autres te face" |
The Following User Says Thank You to ElTurco For This Useful Post: | Alessiapia14 (09/10/2019) |
09/10/2019, 07h15 | #4 | |
Fidèle à T-E
Date d'inscription: août 2017
Localisation: France. Lyon
Âge: 40
Messages: 2 748
Thanks: 2 905
Thanked 5 097 Times in 2 114 Posts
Pouvoir de réputation: 61 |
Citation:
je sais que dans cantiecar Configurator tu peu faire des réglages et dans FORScan ça te propose en passthru interface comme sur la capture d ' écran Dernière modification par Alessiapia14 ; 09/10/2019 à 07h39. |
|
The Following User Says Thank You to Alessiapia14 For This Useful Post: | ElTurco (09/10/2019) |
09/10/2019, 07h31 | #5 |
Fidèle à T-E
Date d'inscription: août 2017
Localisation: France. Lyon
Âge: 40
Messages: 2 748
Thanks: 2 905
Thanked 5 097 Times in 2 114 Posts
Pouvoir de réputation: 61 |
pour info les drivers pssthru CANTIECAR sonT fourni avec la version RC
SUR CE LIEN http://tiecar.net/CANtieCAR4_Firmware_RC Regarde la capture d'écran l'amis si pas assez net voici le liens de la page http://tiecar.net/support.html
__________________
No clic thanks ,No clic Reputation ,pas d'aide! |
09/10/2019, 07h43 | #6 |
Fidèle à T-E
Date d'inscription: août 2017
Localisation: France. Lyon
Âge: 40
Messages: 2 748
Thanks: 2 905
Thanked 5 097 Times in 2 114 Posts
Pouvoir de réputation: 61 |
İnterface Passthru DICE J2534-1 et J2534-2
pour faire la mise a jour complète du firmware
1. Install latest CANtieCAR firmware 1.1. Download the latest CANtieCAR firmware from http://tiecar.net/CANtieCAR4_Firmware_RC and extract the firmware file from the archive (it should be CANtieCAR4_RC_BW04010846_FW04010428.rfw) 1.2. Connect the CANtieCAR interface to the USB port of the computer (only to the computer and not to car) 1.3. Open the flash drive of the CANtieCAR and execute the CANtieCAR Configurator program (it is named CANtieCAR.EXE) 1.4. Select the correct COM port from the drop-down list of ports and click “Search” (the program will show information about the connected interface) 1.5. Now select “Update” on top (the program will show the CANtieCAR firmware update options) 1.6. Click the “…” button and select the file with new firmware (CANtieCAR4_RC_BW04010846_FW04010428.rfw) 1.7. Click “Run” and wait till the update process finishes and lights on the interface stop to flash (it is less than a minute) 1.8. Now select “Settings” on top and then click the “Search” button again (the “Firmware” number on bottom should change to 4.1.0428) 1.9. In the table of modes double-click on MultiECUScan (FiatECUScan v3.4+) 1.10. Close this program… 2. Switch to WiFi mode (instead of Bluetooth). 2.1. Connect the interface to computer with USB cable. 2.2. Open the flash drive and navigate to SYSTEM folder 2.3. Open SYSTEM.INI (with notepad) and change from WIFI=0 to WIFI=1 NOTE: You can go back to Bluetooth mode at any time by changing this value back to WIFI=0 2.4. Save the file and close notepad. 3. Update WiFi chipset firmware 3.1. Download the WiFi firmware from http://tiecar.net/CANtieCAR4_WIFI_Firmware 3.2. Extract the files from this archive (blank.bin, boot_v17.bin, config.bin, esp_init.bin, user1.bin) and copy them into UPDATE\WIFI\ folder on the CANtieCAR flash drive 3.3. Disconnect the CANtieCAR interface from USB port and then connect it again. It will begin the update of firmware. The STATUS and other LEDs will blink during the firmware update. Wait about 1 minute till the LEDs stop blinking. 4. Disable logging in the WiFi firmware. The WiFi firmware is still in testing/incomplete phase and needs this additional step to make it work correct. 4.1. Connect the CANtieCAR interface to a car only (do not connect to USB!) 4.2. The RADIO led will begin to blink in white to indicate that the inerface is in WiFi mode 4.3. Search/connect to wireless network "CANtieCAR_XXX" on your computer (XXX will be the serial number of the interface) 4.4. Open a web browser and go to http://192.168.4.1 . It should open an "esp-link" configuration page. 4.5. Click on Debug log in the left menu. 4.6. Find UART debug log: on top and click off. 4.7. Close the web browser, disconnect the WiFi and interface. 4.8. Do not do this yet: Using the above configuration page it is also possible to configure the CANtieCAR interface in "station" mode so that it will connect directly to your router. Then any device connected to the router will be able to use the interface. Multiecuscan will automatically search for CANtieCAR interfaces on local networks and will find the interface no matter if it is connected through router or AP mode. 5. Configure WiFi interface and Multiecuscan on your iPhone/iPad 5.1. Connect the CANtieCAR to your car only (do not connect to USB) 5.2. Search and connect to the WiFi network (CANtieCAR_XXX) on your iPhone/iPad 5.3. Start Multiecuscan app on your iPhone/iPad (The Multiecuscan app is available on the App Store) 5.4. Go to Settings (the small button in bottom left part of screen) and set the interface to CANtieCAR 5.5. Now, you should be able to select the car make>model>version>system. 5.6. Select a module and click "Connect" (or swipe left/right the module name and select "Connect"). 5.7. The first connection will be a little slower because Multiecuscan will search for CANtieCAR interface IP port. Attention pour interface v4 !! Dernier version !!
__________________
No clic thanks ,No clic Reputation ,pas d'aide! Dernière modification par Alessiapia14 ; 09/10/2019 à 08h01. |
The Following 3 Users Say Thank You to Alessiapia14 For This Useful Post: |
09/10/2019, 16h35 | #7 |
Membre accro
Date d'inscription: novembre 2018
Localisation: France land
Messages: 1 023
Thanks: 4 795
Thanked 2 768 Times in 750 Posts
Pouvoir de réputation: 34 |
Merci infiniment frère Alessiapia14 pour ton partage très intéressant, j'ai aussi l'openport 2.0 avec forscan mais limité en protocole de communication, je vais lire et suivre tes instructions pour Cantiecar, merci encore.
PS : "Beaucoup d'utilisateurs openport 2.0 brûle leurs câble après flashage etc... dû à l'échauffement du régulateur de tension, voici une petite video pour y remédier". https://youtu.be/N4XJSuh10Xs @+
__________________
"Ne pas faire aux autres ce que l'on ne veux pas que les autres te face" |
The Following User Says Thank You to ElTurco For This Useful Post: | Alessiapia14 (09/10/2019) |
09/10/2019, 17h34 | #8 | |
Fidèle à T-E
Date d'inscription: août 2017
Localisation: France. Lyon
Âge: 40
Messages: 2 748
Thanks: 2 905
Thanked 5 097 Times in 2 114 Posts
Pouvoir de réputation: 61 |
Citation:
je suis en lien avec un technicien d'obdauto qui eux suivent la vente et la traduction de multiecuscan et de rosstech en france il est entrain de voir pour baiiser la cantiecar en cahat seul sans la licence de 50 pur un an de mise a jour . FORSCAN EN PASSTHRU FONCTIONNE SANS PROBLEME SUR CNATIECAR V4 EN PASSTHRU IL ME LA CONFIRMER , LE GARS C'EST UN ANCIEN QUI BOSSER DANS LA REPROG ET DIAGNOSTIC , IL A DE LA BOUTEILLE .
__________________
No clic thanks ,No clic Reputation ,pas d'aide! Dernière modification par Alessiapia14 ; 09/10/2019 à 17h40. |
|
The Following 2 Users Say Thank You to Alessiapia14 For This Useful Post: | ElTurco (10/10/2019), progdebutant (09/10/2019) |
09/10/2019, 19h40 | #9 | |
Membre accro
Date d'inscription: juin 2011
Localisation: France/Bordeaux
Messages: 1 473
Thanks: 2 046
Thanked 1 237 Times in 552 Posts
Pouvoir de réputation: 31 |
Citation:
@+ Envoyé de mon ASUS_Z00AD en utilisant Tapatalk |
|
The Following User Says Thank You to DIAGAUTO33 For This Useful Post: | ElTurco (10/10/2019) |
09/10/2019, 21h30 | #10 | |
Genious T-E
Date d'inscription: mai 2016
Localisation: france
Messages: 3 953
Thanks: 4 548
Thanked 3 334 Times in 1 964 Posts
Pouvoir de réputation: 47 |
Citation:
Dommage qu'il ne vende pas la version full |
|
The Following 2 Users Say Thank You to progdebutant For This Useful Post: | Alessiapia14 (10/10/2019), ElTurco (10/10/2019) |
10/10/2019, 07h46 | #11 |
Fidèle à T-E
Date d'inscription: août 2017
Localisation: France. Lyon
Âge: 40
Messages: 2 748
Thanks: 2 905
Thanked 5 097 Times in 2 114 Posts
Pouvoir de réputation: 61 |
Elle a quoi de plus la full, car d'après ce qu on m'a dis les revendeur la bride avec un firmware alternatif pour qu'elle fonctionne avec que multi ecuscan et en option contre finance forscan. En Italie il me dise mes amis que la v4 multiplexe serai identique que les versions full v2-v3
Envoyé de mon iPhone en utilisant Tapatalk
__________________
No clic thanks ,No clic Reputation ,pas d'aide! |
The Following User Says Thank You to Alessiapia14 For This Useful Post: | ElTurco (08/01/2020) |
10/10/2019, 08h12 | #12 |
Patron de Garage
Date d'inscription: mars 2019
Localisation: Ailleurs
Âge: 36
Messages: 5 435
Thanks: 5 087
Thanked 8 787 Times in 4 000 Posts
Pouvoir de réputation: 99 |
Salut,
Effectivement la cantiecar possede le firmware en fonction de ce qui a ete acheté comme option de base.le mode forscan apparait mais impossible a selectionner si on a pas achete l’option ou le full et donc mis a jour le firmware. Malgres que j’apprecie enormement le site obdauto,pk ne pas achete directement a la source?c’est moins cher. Il y a une grosse difference de prix.la ou obdauto vend l’activation de forscan 60€ tiecar.net la vend 30€ Envoyé de mon iPhone en utilisant Tapatalk |
The Following 2 Users Say Thank You to gary01 For This Useful Post: | Alessiapia14 (10/10/2019), ElTurco (08/01/2020) |
10/10/2019, 08h22 | #13 |
Genious T-E
Date d'inscription: mai 2016
Localisation: france
Messages: 3 953
Thanks: 4 548
Thanked 3 334 Times in 1 964 Posts
Pouvoir de réputation: 47 |
salut l'ami
quand je dis full je parle de la compatibilité avec tous les logiciels proposé, ediabas, vag commander ... meme si j'ai tous ces logiciels + cables adaptés ca me fait de payer la meme somme pour une version full et une version non full meme si j'achete deja sur obdauto et préfererait acheter chez lui |
The Following 2 Users Say Thank You to progdebutant For This Useful Post: | Alessiapia14 (10/10/2019), ElTurco (08/01/2020) |
10/10/2019, 08h48 | #14 |
Patron de Garage
Date d'inscription: mars 2019
Localisation: Ailleurs
Âge: 36
Messages: 5 435
Thanks: 5 087
Thanked 8 787 Times in 4 000 Posts
Pouvoir de réputation: 99 |
La cantiecar chez obdauto 289€ juste pour mec chez tiecar 360 en full.et encore c’est des dollars donc a voir avec la convertion.
Envoyé de mon iPhone en utilisant Tapatalk ---------- Post added at 07h43 ---------- Previous post was at 07h41 ---------- Et meme 300 sans la licence mec Envoyé de mon iPhone en utilisant Tapatalk ---------- Post added at 07h48 ---------- Previous post was at 07h43 ---------- Mes pardon miltiecuscan Envoyé de mon iPhone en utilisant Tapatalk |
The Following 2 Users Say Thank You to gary01 For This Useful Post: | Alessiapia14 (10/10/2019), ElTurco (08/01/2020) |
10/10/2019, 09h00 | #15 |
Genious T-E
Date d'inscription: mai 2016
Localisation: france
Messages: 3 953
Thanks: 4 548
Thanked 3 334 Times in 1 964 Posts
Pouvoir de réputation: 47 |
Qui vends sa cantiecar pas chere svp lol
|
The Following 2 Users Say Thank You to progdebutant For This Useful Post: | Alessiapia14 (10/10/2019), ElTurco (08/01/2020) |
Sponsored Link |
Liens sociaux |
|
|
Discussions similaires | ||||
Discussion | Auteur | Forum | Réponses | Dernier message |
Utilisation IDS 113.05 / FVDI J2534 [FORD] | swager974 | Ford, Mazda, Land Rover, Jeep, Jaguar | 0 | 04/06/2019 13h09 |
Logiciel J2534 ToolBox | zenata | Logiciel & autres documentations général | 0 | 26/08/2018 21h43 |
J2534 programmes compatibles | BackONct | Autocom, Delphi, Actia, Bosch, SPC, BrainBee, Autel | 0 | 28/09/2015 00h03 |
VSI-J2534 outil Pour flash | tripeux | Logiciel & autres documentations général | 0 | 08/12/2013 15h01 |
tech2win + j2534 | Vova | Opel-Vauxhall, Saab | 0 | 17/06/2013 23h57 |