Tlemcen Car electronics - Lexia & PP2000 updates (Up-to DiagBox v8.37)

Page 2 sur 2

Voir 40 message(s) de cette discussion en une page

Tlemcen Car electronics (https://www.tlemcen-electronic.com/forum/)

- LEXIA, PP2000, DiagBox (https://www.tlemcen-electronic.com/forum/forum95/)

- - Lexia & PP2000 updates (Up-to DiagBox v8.37) (https://www.tlemcen-electronic.com/forum/lexia-pp2000-diagbox/60967-lexia-pp2000-updates-diagbox-v8-37-a.html)

Simple

02/02/2017 11h25

I don't know what is the problem, may be corrupt files, but try this:
With DiagBox closed, Kill all DiagBox processes using the batch file (as Administrator), Apply the 8.37/38 update then start DiagBox to perform internet updates.

jletier

02/02/2017 21h00

Merci C'est bon...
"With DiagBox closed, Kill all DiagBox processes using the batch file ".

Je suis parti de la 8.17 fonctionnelle
J'ai fait un kill :41:
Lancer la mise à jour 8.17/37 (installation ok).
Diagbox se lance normalement (8.17 affiché)
Reboot
J'ai fait un kill :41:
Lancer la mise à jour 8.37/38 (installation ok).
Diagbox se lance normalement (8.17 affiché)
J'ai fermé Diagbox et je suis allé modifié "version.ini' pour afficher la version en 7

Je veux être sur d'une chose, c'est normal que la version affichée est toujours restée à 8.17 et que ce soit toujours l'ancienne présentation ?
Y a t'il un moyen sur pour savoir que je suis réellement en 8.38 ?

Il me semblais (d'après le post de Maitresox http://www.tlemcen-electronic.com/fo...3&postcount=13) que depuis la version 8.36 Diagbox prend en charge le nouveau 5008 ?
Je n'ai pas le nouveau 5008 d'affiché...

:dance:

Simple

02/02/2017 21h42

I am not sure I fully understand the post, is DiagBox working now?

Any way, for DiagBox + Lexia + PP2000 to work, it is important that version is 07.xx and not 08.xx eg. (version=07.838). If you have version=08.xx, APPDIAG.SYS will be corrupted and need to be restored. This is explained in DiagBox 8.01 installation thread under versions.

With respect to update 8.36, I have a copy, but it was withdrawn by PSA because it was buggy and no longer available for download, and 8.37+8.38 were released instead.

I only included Lexia and PP2000 updates but not DiagBox, this is why you don't see reflection on DiagBox beyond 8.17.

The latest updates are 8.39 (44 mb) and 8.40 (33 mb) and I have both of them, but they don't have any update for Lexia or PP2000.

I hope the above is helpful, Simple.

jletier

02/02/2017 22h59

Oui DIAGBOX fonctionne.

Après toutes les mises à jours, il était effectivement resté affiché en 8.17. Actuellement j'ai modifié en 07.838 (comme vous me l'avez conseillé).

Je ne pense pas que mon APPDIAG.SYS soit endommagé, diagbox ne me fait pas de problème de licence.

Donc voici les versions que je viens de relever dans mes fichiers:

Diagbox est resté en 8.17
Lexia s'est mis à jour en 500.74
PP2000 s'est mis à jour en 600.80

Si vous voulez que je test une de vos dernières mise à jour, je suis volontaire :2:

Simple

02/02/2017 23h29

Excellent and well done, I hope a lot of people will learn from your experience, now everything will work well.

Let's hope maitresox will find the time to prepare some DiagBox updates.

jletier

02/02/2017 23h33

Simple, j'ai une question.
Depuis la version 7.62, le telecodage manuel sans connexion au serveur PSA est désactivé pour la plupart des véhicules.

Apparemment il y a des modifications à faire dans les dossiers des vehicules "C:\AWRoot\dtrd\tree\Vehicle\ " et "C:\AWRoot\dtrd\tree\Vehicle\SUREQ\"

Est-ce que les dernières versions 8 que tu nous donne sont bloqué de la même façon par PSA ?

Si oui, aurait-tu une idée des lignes à modifier (j'ai cru comprendre que c'est fastidieux si on veut faire tous les véhicules, mais au cas par cas c'est peut-être faisable...)

Tu parlais qu'il fallait éventuellement modifier FileName="script_telexx_ManualTelecodingConnected. s" IsCritical="NO" voire même d'autres valeurs

Simple

03/02/2017 00h25

I have an old Citroen C8 2.0 HDi Diesel Exclusive. My Citroen is fine and don't really have problems with it. I only use DiagBox 3 or 4 times per year to perform some check-ups and occasionally perform Telecoding.

If I make program changes to DiagBox, I cannot test it, because I do not have access to another Citroen or Peugeot car.

I tried to understand the Telecoding scripts and posted my understanding on an English site. But one of the colleagues on this site (Thom@s) copied it and posted it here:

http://www.tlemcen-electronic.com/fo...7&postcount=90

I was hoping people use it to make changes to their scripts and discuss them on the forum until all the right parameters are identified. Then we collect all these changes and put them in a special Telecode release..

Alas, no one is contributing, the reason is probably the hugely varying experiences and backgrounds, the forum is NOT being used for discussions, it is only for problem solving. I am sure this will be solved in few weeks and the scripts will be fixed in short time.

DIAGAUTO33

09/02/2017 15h14

Salut à tous, juste pour remonter un petit beug dans lexia :

La langue de lexia est bien en FR mais les "mesures parametres" sont en anglais.

Le reste ( lecture defaut , identification, etc..) sont bien en français.

Véhicule : XSARA PICASSO 2l HDI 2001

Dès que je peux, je test sur un autre modèle de véhicule pour voir si encore présent.

Rien de bien grave !

Merci encore pour ces mises à jour Simple !

Regards.

maskcoto

13/02/2017 09h55

Merci, je mis à jour à nouveau

J'ai plus de fonctions Lexia Citroen C3 en 2003

En 3008, je dois essayer de connecter le PP2000 avec le moteur de la calculatrice.

Simple

13/02/2017 12h17

If you wish to change the language through the menu in DiagBox 8.xx, you can do that after installing 8.01 or up****** to 8.02, the language menu works for versions up to 8.08.

Ian995

23/02/2017 15h06

Hi

I have loaded to the laptop Diagbox v7.83 which was working fine

After the PP2000 and lexia update 8.17 to 8.37 I am now getting an error

The JRE or JDK must be available in order to run Sim. No java vitual machine was found after searching the following locations jre7/bin

Any idea why this happen and how do I get around it

Thanks Ian

Simple

23/02/2017 15h46

DiagBox 7.xx uses the old engines (Java 6 etc..), DiagBox 8.xx uses the newer ones (Java 7 etc..)..
In order to fully update your Lexia and PP2000, you need to install App-835 (which is the complete APP folder from DiagBox 8.35), then update it to 8.38.. Or, you can install DiagBox 8.17, then update 8.17 to 8.37, then 8.35 to 8.38.. (of course 8.35, 8.36, 8.37 are not necessary in this case, but they are harmless).

Ian995

23/02/2017 15h53

Hi Simple

Thanks for your quick reply, it is greatly appreciated

And thanks you for hard work in making these updates

Many thanks Ian

Simple

02/03/2017 03h10

APP_Update_838-842

1 pièce(s) jointe(s)

Added a link to "APP_Update_838-842.exe", Please attempt if you have installed App update v8.38 only.

Enjoy, Simple.

guyguy307

02/03/2017 05h13

hello Simple

About this project mentioned above and go back by thom @ s that I find very interesting, what should we look at?

I work a lot with peugeot beeper and newboxer started from 2015 and no telecoding are possible offline in bsi, that's why your project interests me a lot for the integrated to the V8.17 and future update.

I stand at your disposal if you need. thank you, friend

Simple

02/03/2017 08h41

About the Telecoding, you can see that I tried to get people interested and thom@s re-posted my post but no body responded or contributed.

And for the DiagBox updates, if you try to install a new update from PSA, you will find that they replace existing files with newer ones by the same name.
Part of the problem is adapting the new versions of these files: AWFInterpreter_vc80.exe, actialc.dll, AWCore_vc80.dll, fr.actia.AWF.tags.core_vc80.dll'.
Basically, you need to add all/most of new files to DiagBox and make it work.. That's all.

DIAGAUTO33

06/03/2017 17h02

Citation:

Envoyé par Simple (Message 509008)

Added a link to "APP_Update_838-842.exe", Please attempt if you have installed App update v8.38 only.

Enjoy, Simple.

Thanks Mr Simple.

Installed with out problem.
Regards.

kalagane

05/05/2017 10h18

Salut,

comme plusieurs personnes l'ont evoqué la maj de 8.17 à 8.37 se fait mais en ouvrant diagbox , c est toujours affiché 8.17, pareil quand on met les maj 8.38 et 8.42
et remarque la maj 8.42 se fait tres rapidement

et qu'en est il du telecodage manuelle, plus personne en parle

YomGui

29/05/2017 00h39

Lexia or Outirep

Citation:

Envoyé par Simple (Message 481050)

The software provided and the procedures proposed are intended for personal, educational and experimental use to install DiagBox 8.xx related updates. I hold no responsibility for any illegal or improper usage. Carry out this procedure at your own risk.

I present 2 compilations "APP_Update_817-837.EXE" and "APP_Update_835-837.EXE" (links in the attachment). Those executables are intended to update Lexia and PP2000 from version 8.17+ or 8.35 respectively, to the latest 8.37 and will bring Lexia v500.74 and PP2000 v600.79 to latest fixes or support level.

APP_Update_817-837.EXE update should be attempted if you have a working DiagBox v8.17 / v7.81 installation or higher, or if you have a working "APP-835.7z" implementation.

APP_Update_835-837.EXE update should be attempted if you have a working "APP-835.7z" implementation.

Procedure:
1- Ensure you have a backup copy of the file "C:\AWRoot\bin\fi\APPDIAG.SYS" before you start.
2- Download and execute the appropriate file for your own setup. The process will copy all necessary files to the updt folder, it will then automatically kill all associated processes to enable overwriting without conflicts.
3- Run DiagBox to start the update process and wait until DiagBox is operational. Close DiagBox and restart your computer to ensure all processes are running.

Done..! you may run DiagBox as usual..

Have fun!

Lexia language is set to English and PP2000 to french, if you wish to change them, edit the DICO.TXT file in the EXE folders of LEXIA or OUTILREP (PP2000) and replace "GB" with "FR" or vise versa.

P.S. DiagBox has been running on Firmware 4.3.4 since 7.66/8.02.

Regards, Simple.

Hi,

I can not find Lexia.exe here or Outirep.exe. Where are they in Windows ?

YomGui

tazmania7700

09/06/2017 01h14

Bonjour a tous,

je suis sur la version 7.83(8.19) et je voudrai bien passer a la version 8.37 pourriez-vous m'aidez.

Merci d'avance

Marianoss

28/11/2018 22h21

:14:

Citation:

Envoyé par Simple (Message 481050)

very thanks

ElTurco

29/11/2018 19h09

Merci frère Simple pour ton partage, Big Respect For ☆☆☆☆ Simple ☆☆☆☆☆

Fuseau horaire GMT +1. Il est actuellement 02h28.

Page 2 sur 2

Voir 40 message(s) de cette discussion en une page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Version française #23 par l'association vBulletin francophone
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Tlemcen-electronic © All right reserved