Tlemcen Car electronics

Tlemcen Car electronics (https://www.tlemcen-electronic.com/forum/)
-   Immobilizer dumps/solutions (https://www.tlemcen-electronic.com/forum/forum35/)
-   -   edc15 vm+ immo off (https://www.tlemcen-electronic.com/forum/immobilizer-dumps-solutions/112378-edc15-vm-immo.html)

alexpert 04/04/2024 22h31

edc15 vm+ immo off
 
2 pièce(s) jointe(s)
salut les amis quelqu un pourrait me faire un off pour un audi a4 avec une 29f800
si possible une solution teste car j ai que le calculateur et la voiture est pas tout pret.
merci d avance.
pour info c suite au remplacement d une pompe hp.

aza 05/04/2024 11h48

1 pièce(s) jointe(s)
salut alexpert
votre OFF ci-joint sur eeprom 24c04 .! ! !
sachant que vos données sont :
VIN : WAUZZZ8E66A17****
IMMO : AUX6Z0E0129035
KM : 328035 km
PIN : 01035
salutations

Momo-02 05/04/2024 16h04

Sur certains il faut faire flash également , autrement je joint la procédure pour adapter pompe :

Select]
[01 - Engine]

[Login - 11]
4-digit PIN
The PIN needs to be entered as 5-digit number. For example, if your PIN is 1234, enter 01234.
[Do it!]

[Adaptation - 10]
Enter 050 in "Channel Number".
[Read]
4-digit PIN
The PIN needs to be entered as 5-digit number. For example, if your PIN is 1234, enter 01234.
[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]

Switch OFF the ignition and let the car sit for ~1 minute, then switch ON the ignition again.
Start the Engine to verify the adaptation was successful.

Momo-02 05/04/2024 16h18

1 pièce(s) jointe(s)
Citation:

Envoyé par momo-02 (Message 1020657)
sur certains il faut faire flash également , autrement je joint la procédure pour adapter pompe :

Select]
[01 - engine]

[login - 11]
4-digit pin
the pin needs to be entered as 5-digit number. For example, if your pin is 1234, enter 01234.
[do it!]

[adaptation - 10]
enter 050 in "channel number".
[read]
4-digit pin
the pin needs to be entered as 5-digit number. For example, if your pin is 1234, enter 01234.
[save]
[done, go back]
[close controller, go back - 06]

switch off the ignition and let the car sit for ~1 minute, then switch on the ignition again.
Start the engine to verify the adaptation was successful.

essaie ce off

alexpert 05/04/2024 22h51

merci AZA mais si j ai preciser que c etait une 29f800 c qu il faut egalement faire la flash sur ce modèle.
merci aussi a momo-02 mais ton mdp ne fonctionne pas

Momo-02 06/04/2024 14h29

1 pièce(s) jointe(s)
Citation:

Envoyé par alexpert (Message 1020696)
merci AZA mais si j ai preciser que c etait une 29f800 c qu il faut egalement faire la flash sur ce modèle.
merci aussi a momo-02 mais ton mdp ne fonctionne pas

mdp identique

alexpert 18/04/2024 08h42

Salut la team petit retour
Merci momo ton fichier marche nickel.
Après un petit cheksum et un peu d attente Après installation.
La voiture démarre sans aucun voyant.
Merci à tous.


Fuseau horaire GMT +1. Il est actuellement 22h32.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Version française #23 par l'association vBulletin francophone
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Tlemcen-electronic © All right reserved