Cummins InPower Pro 14 (installation files)
 

Cummins InPower Pro 14

InPower provides the following functions for monitored equipment:
• Direct connection capability from a personal computer to PowerCommand genset controls, transfer controls, and system controls; For details on devices supported refer Technical Details tab.
• Allows the monitored equipment to send alarm information to a connected computer.
• Configurable for units of measurement, and level of user access (read only, read/change values, administrator).
• Adjustment of nearly every adjustment parameter within the connected control system, including parameters such as voltage and frequency levels, gains, protection set-points and other values.
• Convenient programming of configurable inputs in the controllers.
• Viewing of equipment history, fault codes, and data associated with fault codes.
• Generates reports of monitored data
• Allows released firmware upgrades on Power Command genset controls.
• Plot critical parameters in a strip chart format, and export data to 3rd party software tools for manipulation and viewing.
• Simulate fault conditions in genset controls in compliance to NFPA 110 requirements to demonstrate functionality of the controller and monitoring equipment in a facility.

https://i120.fastpic.org/big/2022/08...aa8a8898eb.png

The link was updated

Cummins InPower Pro 14


InPower provides the following functions for monitored equipment:
• Direct connection capability from a personal computer to PowerCommand genset controls, transfer controls, and system controls;
• Allows the monitored equipment to send alarm information to a connected computer.
• Configurable for units of measurement, and level of user access (read only, read/change values, administrator).
• Adjustment of nearly every adjustment parameter within the connected control system, including parameters such as voltage and frequency levels, gains, protection set-points and other values.
• Convenient programming of configurable inputs in the controllers.
• Viewing of equipment history, fault codes, and data associated with fault codes.
• Generates reports of monitored data
• Allows released firmware upgrades on Power Command genset controls.
• Plot critical parameters in a strip chart format, and export data to 3rd party software tools for manipulation and viewing.
• Simulate fault conditions in genset controls in compliance to NFPA 110 requirements to demonstrate functionality of the controller and monitoring equipment in a facility.


https://i120.fastpic.org/big/2022/08...aa8a8898eb.png

Need it? Push buttons Rate (Reputation) and Thanks, PM for pass.

Hi my friend,
Many thanks for your soft, but i think 90 percent of people on this forum Will not use this Last one.
i know some people who works with Cummins motors [emoji6].
If you have same for caterpilar i take[emoji6].
Have a Nice day.

Envoyé de mon SM-A125F en utilisant Tapatalk

The link was updated

Cummins InPower Pro 14.5 (installation files)
 

added Cummins InPower Pro 14.5 (installation files)

The link was updated