Tlemcen Car electronics

Tlemcen Car electronics (https://www.tlemcen-electronic.com/forum/)
-   Mécanique générale (https://www.tlemcen-electronic.com/forum/forum38/)
-   -   Peugeot 508 hybrid4 2013 overheating power unit (https://www.tlemcen-electronic.com/forum/m-canique-g-n-rale/101918-peugeot-508-hybrid4-2013-overheating-power-unit.html)

blufonac 05/02/2022 14h25

Peugeot 508 hybrid4 2013 overheating power unit
 
I changed bearing on reversible alternator and while doing that a lot of air seems to be stuck somewhere in rear cooling circuit. After 15-20min of driving I get error P0A35 - overheating power unit. I tried bleeding system via all bleed screws I could find - one on electric motor (rear axle) and one in battery compartment (trunk).
Are there any other bleeding vents in rear area? I think this car is very similar to RXH and DS5 hybrid4, regarding drivetrain and cooling.

help is much appreciated.

phil1 05/02/2022 16h30

slt
deja pour la purge il y a une procedure specifique peugeot ..sous vide
apprentissage courroie acc ok?

blufonac 05/02/2022 18h54

Where can I find details about the procedure? If it is even possible without the dealer?

I tried to go to the dealer last week but due to pandemic they put me on hold, and I kinda need the car... I guess I'll just have to wait than.

belt seems ok, no errors except overheating. I can literally hear water boiling under the rear end of car.

do you maybe know usual working temperatures for alternator, rear electric motor and ac/dc converter?

phil1 05/02/2022 19h11

re
cette procédure es réservée aux membres ayant une habilitation électrique l ami
a voir si un membre veut la partager avec toi..

dreamland 06/02/2022 11h14

Salut

Ton défaut est lié a un problème de purge de ton circuit de refroidissement , regarde ce post pour plus d'information << ici >>

A+

blufonac 07/02/2022 08h55

thank you dreamland,
but I don't have priviledges to download attachment from your post since I'm new member. When I get clerance I'll give it a try.

k211098 09/02/2022 16h08

Bonjour,

Je viens de connecter ma nouvelle pédale et toujours le même problème.

Toujours avec l'impossibilité d'effacer le code erreur P1645.

J'ai aussi désactivè le limiteur de vitesse.

Rien y fait.

Je pense sérieusement pour le calculateur qui a un défaut.

blufonac 17/02/2022 09h05

to give feedback, dealer took my car finaly. They spend two working days purging traction cooling circuit. Now car runs fine, no more overheating.

so for anyone doing alternator change be very careful not to let air in, purging this circuit is not easy job.

thanks dreamland for help!

R-amid 02/03/2022 23h03

Hello,

J’ai répondu à ton message privé, tu as les explications tu devrais t’en sortir [emoji6]

Un merci à Dreamland qui à l’époque m’avait orienté [emoji18]


Fuseau horaire GMT +1. Il est actuellement 19h26.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Version française #23 par l'association vBulletin francophone
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Tlemcen-electronic © All right reserved