Delphi el5 bsi
 

Hello everyone i will need your help .
I have an Opel grandland x that bsi has a problem with a interior ground point if I use an external ground everything works perfectly. I was think replacing bsi with a used one but my concern is will it work ?
From what i read over net is that i must virgin used bsi and then program it but will pin code been written on bsi from server ?

Hi

I think its better for you to keep the external ground.

This bsi is the most difficult i know and i dont think you can clone it easily.

You can loose all data of your original bsi.

Best regards

Envoyé de mon LYA-L29 en utilisant Tapatalk

Hi,

I can see in your profile you are an engineer.
Why don't you put a jump wire to a confirmed GND into the BSI (5 minute work) ?

I have already done that and everything working but I’m asking if in the future bsi failed what my options are because im new on psa style cars Im used on gm staff that are much easier. Thanks .

---------- Post added at 16h46 ---------- Previous post was at 16h37 ----------

I know this bsi is complicated and i don’t want to clone it , i wanted to virgin used one and coded online . I have seen a shop offering virgin bsi ready to code so i assume that they virgin only the eeprom .

Hi,

Car with a EL5 cost lot of money...
Set new bsi if you want online coding.

Hello z8083
If you have a friend with the udscanonline software I can help you (need uco + a second-hand bsi) need the same model of bsi (because even if it looks like it is not compatible) you need bsi from Opel grandland x. we will do 100% of the operation by the OBD