i need the help of an expert please
 

Hi

my car is Peugeot 406 hdi 90 that had an accident i had to change both front airbags and i Had a dump for Peugeot 406 airbag ECU module changed by a friend who claim to have the airbag resetter program when i did put the EPROM back the air bag lights where still on i took the car to a local garage who did scan it but said that his computer was not communicating with the air bag ECU and that means the wrong file was entered the the EPROM please help me i did attached both dumps if someone can help me please

many thanks

please help me
 

its a Autoliv Module part number: 600 90 28 00 eprom : 95080

i have this if i can help....!!

Hi.

Help.
Renault Scenic car 1.5DCI with computer delphi TRW dcm1.2
Native ECU broken, bought second hand resolder eeprom 95160, the machine started up, but does not respond to the accelerator and hang errors
R0606 and R0100. Probably it is necessary to clean the native dump. Old and the new* dump attached, please clean or move data IMMO
a new. If prompt public address needs to be cleaned, will clean itself.
And one more question about the data lies in the nozzles eeprome or flash?
In this photo from left old, with the right to the new* (second hand).

Thanks in advance

Hi gorecx thank you to you regularly made by the forum before posting your presentation thank you for your understanding CRDL