![]() |
I change the dash on Audi A3 TDI 2001 and the car didn't turn on
Hello,:):)
I change the dashboard on my audi A3, and now the car didn't tur on because the Immo is active. I would like to remove the immo. Please help me. :confused::confused: Thanks Didi |
when you complete your profile we will help u ;)
Regards |
I don't understand My profile is complete.
What is the problem? |
profile
you need to put where in paris i think like country then place
hope this helps |
oh oh
oh oh and read rules?
thats what i was told same gose for every one els i think read rules more than once and update profile with correct country and town |
And now it's ok???
|
You can remove the old eprom from the old dash then solder it in the new one and the car will start ;)
|
Citation:
If i turn off the immo on the ecu. the car turn on with the new dashboard? On this dashborad the km is on the 68HC912. But the pin i don't know if it's on the same processour or no. You know where is the pin and if is it possible for change this pin? |
I dont know the adress for pin code, but try to see VagTacho if can do this job :)
|
pin
pos:Dt file and i will look at it for you
|
Citation:
But on Immokiller v1.10 he say it's a 24c02. the ecu is a Bosch (0 281 010 308) i joint the pictures. What my soltion? :confused::confused: thanks |
Yes, use immokiller then check your PM
|
Hello, A friend remove the immo on my Audi A3. he use edc soft.
You know this soft? I think it's not possible with IMMOKILLER because my ECU is a bosch edc15p+ thanks. |
Citation:
Thanks for this infomation... Very good information for the futur. ;) |
Fuseau horaire GMT +1. Il est actuellement 15h22. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Version française #23 par l'association vBulletin francophone
Search Engine Optimisation provided by
DragonByte SEO (Pro) -
vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Tlemcen-electronic © All right reserved