Immo OFF , Fiat Coupè Turbo 20v
 

Hi, I should do the Total Immo off on this car (Fiat Coupè turbo 20v).. the ECU is Motronic m2.10 and the below I have attached the Original file and the dump of the 24C04..


But I don't know how can I do the total IMMO OFF... Could you halp me..?


THK YOU!


Best Regards

Hi , how have you made for extract the dump ?

how do you have read your eeprom ? you have selected what for device ? it could be a 24C02 ...

Oui c'est une 24c02 , l'eprom entouré en jaune sur l'image.

Hello matteo23,

adds a avatar to complete your profile.

Thanks.

Thank you

Hi, I read the eprom 24C04 (maybe 24C02)

Hi, how can I put the picture on my avatar..? I dind't find I can do..

Thk YOU

simply click here :

http://www.tlemcen-electronic.com/fo...?do=editavatar

also dont forget presentation here : http://www.tlemcen-electronic.com/fo...t=33428&page=2


@+

Hi ,
try to read as a 24C02 EPROM and post it.
I have a solution for you.

and don't forget thanks button ...

I made all.. Thk you !

Hi Thank you for your reply..!

I attached the original dump of the 24C02... (in fact it is 24C02 not 24c04, how I said..:7:)

Hello,
Write the content to the 24c02 chip.
Your ECU is now virgin and can be put in any car.
If you want to totally disable the immobilizer just disconnect the immobilizer box.

test and report.

Thank you for your reply..!

Hi, Thank You for your reply..

I tried your Immo Off, but unfortunatly it doesn't work..

I tried :

1) Without the Immobox , the car didn't start without the code light and the fans was switched on

2) With Immobox, the car didn't start and the fan was switched on, but the code light was turned on

Did you ever try this solution..?


thk YOU!