Tlemcen Car electronics

Tlemcen Car electronics (https://www.tlemcen-electronic.com/forum/)
-   Section for english users (https://www.tlemcen-electronic.com/forum/forum66/)
-   -   320d e46 error code 47 (https://www.tlemcen-electronic.com/forum/section-for-english-users/47377-320d-e46-error-code-47-a.html)

ilirii 14/11/2015 15h10
320d e46 error code 47
 
hi i have a bmw e 46 1999 320d wich i have this code i dont know what i could be i have only this error 47 synchronization of speed sensor do i have to turn the engine to timing points and reconect the cranckshaft sensor or what any idea ??????????

adel2789 14/11/2015 16h51
hello i didn't understand what is the problem exactly, the car doesn't start or just a simple fault?
otherwise the speed sensor is attached to the abs module

daf06 14/11/2015 17h31
hi,
you have a timing problem between speed sensor tea cranckshaft
check whether your tour minute hand moves when you turn the starter
if you have a cut sensor !!!

do not forget thanks

ilirii 14/11/2015 17h55
Citation:
Envoyé par daf06 (Message 365657)
hi,
you have a timing problem between speed sensor tea cranckshaft
check whether your tour minute hand moves when you turn the starter
if you have a cut sensor !!!

do not forget thanks
when i try to start the car the rpm mounts untill 0.3 it goes i think but would not start the car so :S

jah83 15/11/2015 07h13
Did you touch to the pomp? If yes this fault means that the pomp is not "caler" , sorry I dont know this word in english but it s quite the same thing that when a timing belt is not in the good place between up and down part of the engine

ilirii 15/11/2015 09h59
1 pièce(s) jointe(s)
Citation:
Envoyé par jah83 (Message 365867)
Did you touch to the pomp? If yes this fault means that the pomp is not "caler" , sorry I dont know this word in english but it s quite the same thing that when a timing belt is not in the good place between up and down part of the engine
i have sent it to auvegne electro diesel to calee(timing)i have 1 year guaranty i just want to know if that is or i found this on a web that it explains my problem so i will do this with diss if no luck then electro diesel


Fuseau horaire GMT +1. Il est actuellement 20h19.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Version française #23 par l'association vBulletin francophone
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Tlemcen-electronic © All right reserved