Tlemcen Car electronics

Tlemcen Car electronics (https://www.tlemcen-electronic.com/forum/)
-   Immobilizer dumps/solutions (https://www.tlemcen-electronic.com/forum/forum35/)
-   -   IMMO OFF BOSCH ME7.4.4 0261207477 Peugeot 206 1.6 16V (https://www.tlemcen-electronic.com/forum/immobilizer-dumps-solutions/51192-immo-bosch-me7-4-4-0261207477-peugeot-206-1-6-16v.html)

Brice59 21/02/2016 19h11

IMMO OFF BOSCH ME7.4.4 0261207477 Peugeot 206 1.6 16V
 
1 pièce(s) jointe(s)
Bonjour,

Je souhaite faire un off sur un calculateur d'une 206CC 1.6 16V. C'est un Bosch ME 7.4.4 ref. 0261207477.

J'ai fait une lecture de la 95160 au GQ-4X. Fichier joint.

Pouvez-vous me donner un coup de main? Est-ce suffisent de faire le off sur l'eeprom 95160 ou faut-il aussi le faire sur la flash?

Quel logiciel fonctionne bien? J'ai vu que Volta le fait mais est-ce fiable car volta modifie 8 valeurs et cartool 646 valeurs!

J'espère que vous pourrez m'éclairer.

Merci et bonne soirée!

CHATONDU38 21/02/2016 19h23

Salut,

Il faut modifier les 2. Flash et eprom. Je croie que cartool le fait bien

Meziane93 21/02/2016 19h25

Je confirme cartools le gère très bien mais il faut faire flash et eprom

Brice59 21/02/2016 19h34

Merci mes amis!

Auriez-vous des infos pour la lecture en bootmode avec FGTech V54 par hazard? J'ai pas la flash, va falloir faire une lecture...

Merci encore!!

gkogkolos 31/07/2016 08h32

Immo off 0261207477 tested gkogkolos
 
1 pièce(s) jointe(s)
write 95160 dump i attach you
write 29F400 flash i attach you.

Everything will work like a charm

Press Reputation +1 and Thanks buttons first, password in pm-inbox

regards

:smokin:

fufounet 21/11/2017 19h52

hello tested it
car start but no more tha 2000 rpm
where is the trouble?
regards

Brice59 22/11/2017 09h26

Hello,
Probably you need to reset adaptation of the throttle body and the gas pedal.


Also Eeprom can be modified in 2 ways. You can try first and 2d version and see if there is a difference.

fufounet 22/11/2017 10h34

thanks for your reply....done already....fault code on buttefly housing...
position sensor with pollution warning....
tryed to others buttefly->same
checked all wires to ecu->all good

Brice59 29/12/2017 06h30

Sorry for my late reply but did you tried the versions if the flash modifications done buy the software ?

I did 2 ECUs and I had the same problem and solved it by changing the version.


Fuseau horaire GMT +1. Il est actuellement 15h59.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Version française #23 par l'association vBulletin francophone
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Tlemcen-electronic © All right reserved