Tlemcen Car electronics

Tlemcen Car electronics (https://www.tlemcen-electronic.com/forum/)
-   Immobilizer dumps/solutions (https://www.tlemcen-electronic.com/forum/forum35/)
-   -   Immo off edc16c3 (https://www.tlemcen-electronic.com/forum/immobilizer-dumps-solutions/70576-immo-edc16c3.html)

tarik_electronic 06/11/2017 23h15

Immo off edc16c3
 
Slm

Je cherche immo off pour ecu edc16c3 100% sans mode dégrade

Merci T-E

prinzo57 07/11/2017 00h42

slt
poste ton fichier je te le fait.....

AOUN 07/11/2017 15h57

Virgin won't help. Key working but sometimes cannot start. Customer's request need remove...

The below is instruction. It's not mine but from other forum so it is definetely works. Don't have lexia yet so cannot check.

Preparation with PP2000:
0. Go to replacement parts->injection->injectors-> print screen the injector codes
0.5 Go to engine ecu->configuration -> print screen the configuration


The cooking recipe:


1. Read eeprom with BDM (2kb size!)
2. Make virgin with ImmoDec 3.2
3. Disable immo on the virgin file with Immo tool v1.5
4. Load the eeprom file with BDM
5. With PP2000 go to ecu->confiuguration (notice all settings are virgin), do the correct configuration
6. Go to replacement parts->Injection->injectors , register the injector codes

Kennfeld 07/11/2017 16h25

Citation:

Envoyé par AOUN (Message 563006)
Virgin won't help. Key working but sometimes cannot start. Customer's request need remove...

The below is instruction. It's not mine but from other forum so it is definetely works. Don't have lexia yet so cannot check.

Preparation with PP2000:
0. Go to replacement parts->injection->injectors-> print screen the injector codes
0.5 Go to engine ecu->configuration -> print screen the configuration


The cooking recipe:


1. Read eeprom with BDM (2kb size!)
2. Make virgin with ImmoDec 3.2
3. Disable immo on the virgin file with Immo tool v1.5
4. Load the eeprom file with BDM
5. With PP2000 go to ecu->confiuguration (notice all settings are virgin), do the correct configuration
6. Go to replacement parts->Injection->injectors , register the injector codes



ce n'est pas ce q u'il demande :'(

en une frac tion de seconde tout le dump est décodable
et possible d e immo off dans l a meme fraction de seconde avec vérification serveur du checksum de chaque bloc de donné s!!!

Kennfeld 10/11/2017 20h17

il faut absoluement partir du fichier eeprom org de la voiture sinon vous faites de la merde !!!

les options regulateur de vitesse type de boite abs esp et bien d'autre risquent d'etre desactivés sinon ! la config sera donc pourrie avec plein de voyants alors que si vous faites d'apres le fichier de la voiture aucun voyant !!!


Fuseau horaire GMT +1. Il est actuellement 21h00.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Version française #23 par l'association vBulletin francophone
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Tlemcen-electronic © All right reserved