Tlemcen Car electronics

Tlemcen Car electronics (https://www.tlemcen-electronic.com/forum/)
-   Immobilizer dumps/solutions (https://www.tlemcen-electronic.com/forum/forum35/)
-   -   citroen (https://www.tlemcen-electronic.com/forum/immobilizer-dumps-solutions/81402-citroen.html)

Volik8 20/03/2019 14h55

citroen
 
1 pièce(s) jointe(s)
Hello, you need to disable the immobilizer on Citroen, can someone help?
ecu bosch edc17c10

zouaoui mohamed 20/03/2019 15h00

Hi post your file you can help

Volik8 20/03/2019 17h08

Help guys please !!!

Volik8 21/03/2019 10h04

Hello !! Can someone help

yann3 21/03/2019 12h54

1 pièce(s) jointe(s)
like that and go back
forget not thank you
paas ,mp

Bemich 21/03/2019 16h38

Please post Résulta Volik8

Volik8 22/03/2019 11h31

1 pièce(s) jointe(s)
Hello colleagues, the car started but there is a problem, the bsi unit does not understand that the car is running, and the wipers do not have anything working ...
there is an error in the bsi block by immobilizer, please correct the dump bsi

yann3 22/03/2019 12h01

Hi, I do not see the relationship between ecu engine and bsi
when making an ecu immobilizer, do not touch the bsi.
the problem is probably

kitopa 22/03/2019 13h31

Volik8 your problem was the BSI i guess. When there is communication problem, the BSI stay in economy mode, and even if the car is running, the BSI don't see that. Check wires, and consider changing BSI.

yann3 23/03/2019 08h40

Hi
the car did not start after a worry bsi, probably.immo off put the engine back into operation, but can not do anything for the bsi.
you have to change the bsi and you swap eeprom

salut
la voiture ne demarrait pas suite a un soucis bsi,probablement.l´immo off a remis le moteur en fonctionnement ,mais ne peut rien pour le bsi.
il faut que tu change le bsi et tu swap l´eeprom

Volik8 28/03/2019 15h32

Citation:

Envoyé par kitopa (Message 679000)
Volik8 your problem was the BSI i guess. When there is communication problem, the BSI stay in economy mode, and even if the car is running, the BSI don't see that. Check wires, and consider changing BSI.

Hello to all !!
Replaced BSI The problem remained !!!
BSI does not see the engine running, BSI remains in economy mode.
Electric power steering also does not work.
The battery charging light is on when the engine is running. Errors in the engine control unit
U1401
U1218
U1213
What to do???

yann3 29/03/2019 07h53

Hi
control the bus can h and ldu abs box, surely him that prevents communication between bsi, engine ECU and power steering.
so shunt the can h and l of the abs case

---------- Post added at 08h53 ---------- Previous post was at 08h52 ----------

Hi
control bus can h and l of the abs box, surely it prevents communication between bsi, engine ECU and power steering.
so shunt the can h and l of the abs case

yann3 29/03/2019 11h53

as said ggvaniou, you will need the eeprom too
https://www.tlemcen-electronic.com/f...ad.php?t=81606

mexicain 30/03/2019 11h03

1 pièce(s) jointe(s)
Hello test


Fuseau horaire GMT +1. Il est actuellement 11h30.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Version française #23 par l'association vBulletin francophone
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Tlemcen-electronic © All right reserved