Witech 17.04.27
 

Bonjour à tous,


Witech version 17.04.27


La cle du fichier à.demander en Mp.

Pas de clics réputations, pas de clics thank's,pas d'aide , pas de clés.



https://mega.nz/#!DM1lxaAb





Envoyé de mon iPhone en utilisant Tapatalk

salut
sympa ce soft
comment le faire tourner avec nos vci J2534 ????
http://blog.uobdii.com/possible-to-w...534-interface/

Je sais et comme je te l'ai dis je suis dessus zenata !!


Envoyé de mon iPhone en utilisant Tapatalk

---------- Post added at 18h49 ---------- Previous post was at 18h48 ----------

Il faut un vpn pour accéder à l'enregistrement


Envoyé de mon iPhone en utilisant Tapatalk

VOILA CE QUE J AI TROUVER


POUR LE MOMENT

Here’s how to sign up... For aftermarket users ONLY
To register a J2534 device, navigate to the wiTECH Account Manager URL and login. https://submgr.am.fcawitech.com/login.htm
Navigate to the bottom of the Subscriptions page and select “Register a Tool”Select the dropdown arrow and select J2534.
DO NOT enter your J2534 device serial number in this field. You must download the J2534 application to get the serial number of the J2534 application you want to register. Select the “download the wiTECH 2.0 J2534 Application” link
Select “Download J2534 MSI Installer” to download.

Ca serai l'icone

J AITROUVER CA AUSSI

http://blog.uobdii.com/possible-to-w...534-interface/ Mais J'avais pas vu , c'est le même liens

ton interface pass thru est émuler avec un serial que mopar doit valider sous 2-3 semaines ouvrées

---------- Post added at 09h53 ---------- Previous post was at 09h49 ----------

VOILA CE QUE J AI TROUVER


POUR LE MOMENT

Here’s how to sign up... For aftermarket users ONLY
To register a J2534 device, navigate to the wiTECH Account Manager URL and login. https://submgr.am.fcawitech.com/login.htm
Navigate to the bottom of the Subscriptions page and select “Register a Tool”Select the dropdown arrow and select J2534.
DO NOT enter your J2534 device serial number in this field. You must download the J2534 application to get the serial number of the J2534 application you want to register. Select the “download the wiTECH 2.0 J2534 Application” link
Select “Download J2534 MSI Installer” to download.

Once it is downloaded, run the J2534 install application. Windows 10 is currently the only officially supported operating system for the J2534 application.
Follow the on-screen prompts to install the J2534 application.
Once the install has completed, launch the wiTECH 2.0 J2534 application.
Select the “Help” tab and then “About wiTECH2.”
Copy the serial number information.
Return to the Register a Tool page and enter the serial number in theOnce you submit for approval, you will receive a notification within 1 to 2 business days to confirm if the J2534 device has been approved.
If your device has been approved you will receive an email and it will then be associated to your account. It will be visible on
the Subscriptions page upon purchase of a subscription.
You can now assign your J2534 device once you purchase a subscription and an Okta account activation email will be mailed to you for logging into wiTECH 2.0.

Witech 17.04.27
 

la version 17.03.01. est aussi dispo





j'ai aussi l'activation qui va avec pour les 2 versions ,upload en cours sur mega

Voici

https://mega.nz/#!WRUFkCSA






pas de clics réputations et pas de clics thanks pas de clé par MP

Salut :14:
activation pour J2534 ??? Keygen ???
Off line ????

https://mega.nz/#!WRUFkCSA

Je n’est pas de fiât en ce Moment pour tester,


Il y’a l’activation avec dans le fichier


Envoyé de mon iPhone en utilisant Tapatalk