![]() |
|
|||||||
| Programmateur de composant (flasher) Aide concernant les flasher de calculateur d'injection, Kwp2000, Bdm, Ghaletto, MPPS ...etc |
|
|
|
Outils de la discussion |
|
|
#1 |
|
Membre habitué T-E
Date d'inscription: février 2009
Localisation: belgique
Âge: 64
Messages: 126
Thanks: 71
Thanked 30 Times in 21 Posts
Pouvoir de réputation: 18 ![]() |
bonjour a tous
quelle est a votre avis le programmateur le plus intéressent xpro-m ou upa? |
|
|
|
|
|
#2 |
|
Débutant T-E
Date d'inscription: juin 2010
Localisation: constantine / alger
Messages: 59
Thanks: 3
Thanked 31 Times in 21 Posts
Pouvoir de réputation: 0 ![]() |
x progm bien sure ,de tres loin
|
|
|
|
|
|
#3 |
|
Membre attaché
Date d'inscription: novembre 2008
Localisation: Algérie, Tlemcen
Messages: 475
Thanks: 97
Thanked 269 Times in 123 Posts
Pouvoir de réputation: 18 ![]() |
UPA aussi, meilleur rapport prix/rentabilité !!
__________________
Just don't like copy paste, in case of, just copy but don't paste !!!!!!!!!:7: |
|
|
|
| The Following User Says Thank You to Amine13 For This Useful Post: | baba (26/12/2010) |
|
|
#4 |
|
Membre trés attaché
![]() Date d'inscription: septembre 2009
Localisation: Maroc, larache
Messages: 786
Thanks: 632
Thanked 207 Times in 116 Posts
Pouvoir de réputation: 19 ![]() ![]() |
UUSP (UPA-USB Serial Programmer)
STMicroelectronics ST62* : ST6240, ST6245, ST6249 NSC CR16* : CR16HCS5 (9), CR16MCS5 (9), CR16MES5 (9), CR16MFS5 (9), CR16MCT5/9, CR16HCT5/9 Motorola HC05* : MC68HC05B6, MC68HC05B8, MC68HC05B16, MC68HC705B16, MC68HC05B32, MC68HC05E6, MC68HC705E6, MC68HC05H12, MC68HC05L28, MC68HC05P3, MC68HC705P3*, MC68HC05X16, MC68HC05X32 Motorola HC08* : MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC (9) 08AZ32A, MC68HC908AZ60, MC68HC908AZ60A Motorola HC11* : MC68HC11A1, MC68HC11A8, MC68HC11E9, MC68HC11EA9, MC68HC11E20, MC68HC11F1, MC68HC11K4, MC68HC11KA2, MC68HC11KA4, MC68HC11KG4, MC68HC11KS2, MC68HC11KS8, MC68HC11L6, MC68HC11P2, MC68HC11PA8, MC68HC11PH8 Motorola HC12* : MC68HC912B32, MC68HC912BE32, MC68HC912D60, MC68HC912D60A, MC68HC912DC128A, MC68HC912DG128, MC68HC912DG128A Motorola HCS12* : MC9S12D64, MC9S12A128, MC9S12DG128, MC9S12DG256, MC9S12H128, MC9S12H256 Architecture d'Atmel 8051 : AT89S51, AT89S52, AT89S53, AT89S8252, AT89S8253 Risque à 8 bits d'Atmel AVR : AT90S1200, AT90S2313, AT90S2323, AT90S2333, AT90S2343, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega8, ATmega16, ATmega161, ATmega162, ATmega163, ATmega323, ATmega64, ATmega103, ATmega128, ATtiny12, ATtiny15, ATtiny2313 Puce PIC12 : PIC12F508, PIC12F509, PIC12F629, PIC12F675 Puce PIC16 : PIC16F627 (A), PIC16F628 (A), PIC16F648A, PIC16F72, PIC16F73, PIC16F74, PIC16F76, PIC16F77, PIC16F818, PIC16F819, PIC16F83, PIC16F84 (A), PIC16F870, PIC16F871, PIC16F872, PIC16F873 (A), PIC16F874 (A), PIC16F876 (A), PIC16F877 (A) EEPROMs I2C : 24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C65, 24C128, 24C256, 24C512, 85C72, 85C82, 85C92, BAW574252, GRM-003, GRM-004, GRM-005, KKZ-06F, MCM2814, PCA8581, PCF8581, PCF8582, PCF8594, PCF8598, PCF85102, PCF85116, SDA2516, SDA2526, SDA2546, X24C00, X24C01 EEPROMs Microware : 7002, 93C06, 93C14, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86, 93S46, 93S56, 93S66, GRN-001, GRO-002, KKZ-01, S220, S2914, ST61907, XLS93C46 EEPROMs SPI : M35080, 25C010, 25C020, 25C040, 25C080, 25C128, 25C160, 25C256, 25C320, 25C640, M25P05, M25P10, M25P20, M25P40, M25P80, ST95010, ST95020, ST95040, ST95080, ST95160, ST95320, ST95640, ST95P02, ST95P04, ST95P08, X5043, X5045 EEPROMs divers : CXK1011, CXK1012, CXK1013, M6M80011, M6M80021, M6M80041, SDE2506, TC89101, TC89102 *EEPROM only Programmer XPROG-m software authorizations: Motorola HC05 family authorization (allows to read/write EEPROM) Motorola HC08 family authorization (allows to read/write EEPROM) Motorola HC11 family authorization (allows to read/write EEPROM) Motorola HC(S)12 family authorization (allows to read/write EEPROM and flash memory) Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM). Motorola HC05B/X family bypass security authorization (allows to read/write secured EEPROM and flash memory ) ST M35080 read/write/erase authorization BMW EWS3 authorization. ATmega family authorization (allows to read/write EEPROM and flash memory)MB ZGS001 authorization Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read/write EEPROM ) National CR16 authorization (allows to read/write EEPROM memory) ST10Fxxx family authorization (allows to read/write flash memory and external EEPROM) MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size) Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory. No need to desolder MCU) c'est la majeur diff entre xpr et upa. Dernière modification par digicar ; 26/11/2010 à 23h04. |
|
|
|
| The Following User Says Thank You to digicar For This Useful Post: | baba (26/12/2010) |
|
|
#6 |
|
Membre habitué T-E
Date d'inscription: février 2009
Localisation: belgique
Âge: 64
Messages: 126
Thanks: 71
Thanked 30 Times in 21 Posts
Pouvoir de réputation: 18 ![]() |
bonjour
se sont des bons produits l idéal se serais d avoir les deux |
|
|
|
|
|
#7 |
|
Débutant
Date d'inscription: février 2013
Localisation: Pombal
Messages: 15
Thanks: 80
Thanked 24 Times in 8 Posts
Pouvoir de réputation: 0 ![]() |
Je travaille avec UPA origine, três bonne avec thes bonnes resources comme scripts. Mais je pense en acheter un x-prog... pour complementer.
Pardon mon français Salut |
|
|
|
|
|
#8 |
|
Membre trés attaché
![]() Date d'inscription: décembre 2011
Localisation: FRANCE , Montelimar
Messages: 967
Thanks: 754
Thanked 1 620 Times in 567 Posts
Pouvoir de réputation: 34 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
BONJOUR
le mieux c'est d'avoir les 2 upa+ xprog et un willem aussi cordialement |
|
|
|
| The Following User Says Thank You to CSYSTEME For This Useful Post: | MecaTech (19/10/2013) |
|
|
#9 |
|
Membre attaché
Date d'inscription: juillet 2012
Localisation: Algérie, annaba
Âge: 43
Messages: 192
Thanks: 308
Thanked 274 Times in 80 Posts
Pouvoir de réputation: 18 ![]() ![]() ![]() ![]() |
pour moi c xprog + upa usb + minipro tl866 + carprog v4.1
__________________
Dtc, Egr, Dpf,Throttle, Flaps, Lambda, Hotstart, AdBlue, Evap, Nox, Speed limiter Skype : soufi217 |
|
|
|
|
|
#10 |
|
Moderateur
![]() Date d'inscription: décembre 2011
Localisation: France, Challans
Messages: 3 791
Thanks: 1 241
Thanked 7 359 Times in 2 025 Posts
Pouvoir de réputation: 143 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Moi aussi, j'ai les deux et ils se complètent bien
|
|
|
|
|
|
#11 |
|
Membre accro
![]() Date d'inscription: mars 2013
Localisation: France, conflans
Messages: 1 191
Thanks: 739
Thanked 255 Times in 164 Posts
Pouvoir de réputation: 19 ![]() ![]() ![]() ![]() ![]() |
bonjour,
je voulais savoir si il y a une différence entre Xprog clone ou original et qu'est ce que la mise a jour de 5.0 à 5.3 apporte de plus ?? Merci |
|
|
|
|
|
#12 |
|
Membre attaché
Date d'inscription: novembre 2012
Localisation: algerie oran
Messages: 422
Thanks: 137
Thanked 77 Times in 68 Posts
Pouvoir de réputation: 15 ![]() |
xprog se mieux surtous pour debutent il est tres facile et pratique
|
|
|
|
| The Following User Says Thank You to DIAGNOSTIC AUTO For This Useful Post: | walteck (23/04/2013) |
|
|
#13 |
|
Membre accro
![]() Date d'inscription: mars 2013
Localisation: France, conflans
Messages: 1 191
Thanks: 739
Thanked 255 Times in 164 Posts
Pouvoir de réputation: 19 ![]() ![]() ![]() ![]() ![]() |
et y'a t-il une différence réel entre le clone et l'original?
|
|
|
|
|
|
#14 |
|
Membre attaché
Date d'inscription: novembre 2012
Localisation: algerie oran
Messages: 422
Thanks: 137
Thanked 77 Times in 68 Posts
Pouvoir de réputation: 15 ![]() |
Bien sur mais il est trop chere meme clone il fait la faire tres bien
|
|
|
|
| The Following User Says Thank You to DIAGNOSTIC AUTO For This Useful Post: | walteck (25/04/2013) |
|
|
#15 |
|
Membre accro
![]() Date d'inscription: mars 2013
Localisation: France, conflans
Messages: 1 191
Thanks: 739
Thanked 255 Times in 164 Posts
Pouvoir de réputation: 19 ![]() ![]() ![]() ![]() ![]() |
ok merci du conseil je vais investir dans un xprog dans ce cas
|
|
|
|
| Sponsored Link |
![]() |
| Liens sociaux |
|
|