Tlemcen Car electronics

Tlemcen Car electronics (https://www.tlemcen-electronic.com/forum/)
-   Section for english users (https://www.tlemcen-electronic.com/forum/forum66/)
-   -   Peugeot 206 immo (https://www.tlemcen-electronic.com/forum/section-for-english-users/31558-peugeot-206-immo.html)

diagnosis29 10/11/2014 08h53

Citation:

Envoyé par bangbong (Message 246957)
It seems that PP2000 and Diagbox software can not be installed in the same PC, you did that? install them in different computer please, if your lexia-3 can not work,you can have a look at SVDI PSA

Hello bangbong ,

Please read the rules before posting

here : http://www.tlemcen-electronic.com/fo...ead.php?t=7622

Thank you in advance

Regards





*

sauzee1 11/11/2014 01h55

Hi thanks for your reply but i did install them on separate computers the seller has now said that they will now send me a new VCI so hopefully that will sort the problem
Thanks

sauzee1 07/12/2014 14h52

Well just to let you know the seller from Aliexpress waited till the payment protection expired then told me they would not send a replacement as it was a system fault (my laptop) and not the Vci.I have installed three separate versions in three laptops (diagbox 7.43 and 5.29 lexia 3.47 and pp2000)
and still no joy
I did get a connection to a 2004 Picasso 1.6hdi but only to the Bsi the cars i have tried are 2001 Peugeot 206 1.4,2002 Picasso 2.0hdi 2004 Picasso 1.6hdi
Peugeot 307 2.0hdi 2004 peugeot 206 1.4
Only one bit of connection and that was the Bsi i dont want to buy another one to find out the same result
If it was the way i have installed the software or something i have not activated or enabled would this cause the problems i have had with two machines
Thanks for any help

teuton 09/12/2014 04h03

You do get the message that the interface is activated after installation is complete?

sauzee1 09/12/2014 11h19

Citation:

Envoyé par teuton (Message 256334)
You do get the message that the interface is activated after installation is complete?

Hi Thanks the computer recognizes the interface i just get no communication with the ECU on any car i try
The first interface i bought i got the update with help from Mr nic and still no communication so i bought an interface with full Nec chips and 7 optucouplers which was more expensive and i still cant get it to work i have tried 3 separate laptops all with windows xp i would probably benefit from someone close by who has a working interface trying my one to see if it the way i have installed it or the interface its self
Thanks

teuton 09/12/2014 19h55

O.k., got it You got all your interfaces from the same supplier?

sauzee1 09/12/2014 23h09

No 2 different suppliers as the first one did not have a version c and only had second rate chips that is why i thought the first one wouldn't work because it was cheap £38 second one cost about £80 that is a full chip version c
I got the same result with both no communication to the ECU
Thanks

teuton 10/12/2014 14h56

Well, it was just on one car one might think it`s related to the vehichle. But as you stae it is on a couple.... Hopefully you'll find someone close to you with a working unit to compare to, br.


Fuseau horaire GMT +1. Il est actuellement 16h15.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Version française #23 par l'association vBulletin francophone
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Tlemcen-electronic © All right reserved