si vous avez été banni pour une raison de spam sur le forum (hacked account) c'est parce que votre compte a été utilisé par des Bots, merci d'envoyer un message via le formulaire de contact en bas de cette page afin de récupérer votre compte, les messages/discussions supprimés ne seront malheureusement pas restaurés.

betrescudan · 27/01/2015, 13h29

we can share here sollutions for solving probblem of k-line sollution?
on peut ici partager les solutions pour k-line kess?

rino93 · 29/01/2015, 21h22

Hi,
Yes why not, if you have any solution for this you can post it here.

betrescudan · 09/02/2015, 05h52

there are variouses sollutions...depends of your pcb...need to post a photo with high resollution of yours

Soplillo · 26/03/2015, 09h28

I have Kess V2 clone and K-line works perfect, with a lot of cars.
Have you checked and dismount obd2 conector and male conector off kess?
Mybe some wire is not soldered, I found some tools with this mistake.

betrescudan · 17/04/2015, 07h17

Fw 4.036 disponible update for kess by teamwiever...

MCNexo94 · 17/04/2015, 11h42

Yes here it is possible to share the information has helped end for those who have reading problem by KLINE.

betrescudan · 17/04/2015, 12h46

for rework the PCB of clone kess for good working k-line,and boot mode edc17,without problems for hot pcb,i posted for free the solution on my site (i can"t post here the name)
for update kess clone from old fw to fw 4.036 i can do by teamwiever...other infos by PM

MCNexo94 · 17/04/2015, 13h00

post solution here ;)

betrescudan · 17/04/2015, 13h42

good joke mate...i said that is posted for free ...on pm i can said where

Pierre Shelly · 18/05/2015, 07h58

Hello, can you tell me what kind of the k-line problem of your kess v2? I guess I may can help you.

27/01/2015, 13h29	#1
betrescudan Membre attaché Date d'inscription: août 2014 Localisation: garage Messages: 372 Thanks: 122 Thanked 368 Times in 147 Posts Pouvoir de réputation: 17	kess v 2 k-line sollutions we can share here sollutions for solving probblem of k-line sollution? on peut ici partager les solutions pour k-line kess?

Discussions similaires
Discussion	Auteur	Forum	Réponses	Dernier message
can bus _k-line	Actif-Car	Réparation & Programmation des calculateurs	4	23/01/2014 16h00
New Maj pp2000 et lexia on line or off line	ramaz	Peugeot, Citroën	10	19/11/2011 08h30
New Maj Diagbox v05.21 to v05.22 off-line and lexia 347.57 on line	ramaz	Peugeot, Citroën	0	02/04/2011 10h56
New Maj pp2000 V24.47 on line or off-line	ramaz	Peugeot, Citroën	0	19/03/2011 07h48
New Maj DiagBox v05.02 to v05.18 on line or off-line	ramaz	Peugeot, Citroën	0	10/03/2011 18h54

29/01/2015, 21h22	#2
rino93 Membre attaché Date d'inscription: juin 2011 Localisation: France / UAE Messages: 341 Thanks: 166 Thanked 280 Times in 99 Posts Pouvoir de réputation: 17	Hi, Yes why not, if you have any solution for this you can post it here.

09/02/2015, 05h52	#3
betrescudan Membre attaché Date d'inscription: août 2014 Localisation: garage Messages: 372 Thanks: 122 Thanked 368 Times in 147 Posts Pouvoir de réputation: 17	there are variouses sollutions...depends of your pcb...need to post a photo with high resollution of yours

26/03/2015, 09h28	#4
Soplillo Membre Non Confirmé Date d'inscription: mars 2015 Localisation: Barcelona Messages: 2 Thanks: 1 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	I have Kess V2 clone and K-line works perfect, with a lot of cars. Have you checked and dismount obd2 conector and male conector off kess? Mybe some wire is not soldered, I found some tools with this mistake.

17/04/2015, 07h17	#5
betrescudan Membre attaché Date d'inscription: août 2014 Localisation: garage Messages: 372 Thanks: 122 Thanked 368 Times in 147 Posts Pouvoir de réputation: 17	Fw 4.036 disponible update for kess by teamwiever...

17/04/2015, 11h42	#6
MCNexo94 Membre accro Date d'inscription: mars 2009 Localisation: France, Val2Marne Messages: 1 477 Thanks: 846 Thanked 733 Times in 443 Posts Pouvoir de réputation: 26	Yes here it is possible to share the information has helped end for those who have reading problem by KLINE.

17/04/2015, 12h46	#7
betrescudan Membre attaché Date d'inscription: août 2014 Localisation: garage Messages: 372 Thanks: 122 Thanked 368 Times in 147 Posts Pouvoir de réputation: 17	for rework the PCB of clone kess for good working k-line,and boot mode edc17,without problems for hot pcb,i posted for free the solution on my site (i can"t post here the name) for update kess clone from old fw to fw 4.036 i can do by teamwiever...other infos by PM

17/04/2015, 13h00	#8
MCNexo94 Membre accro Date d'inscription: mars 2009 Localisation: France, Val2Marne Messages: 1 477 Thanks: 846 Thanked 733 Times in 443 Posts Pouvoir de réputation: 26	post solution here ;)

17/04/2015, 13h42	#9
betrescudan Membre attaché Date d'inscription: août 2014 Localisation: garage Messages: 372 Thanks: 122 Thanked 368 Times in 147 Posts Pouvoir de réputation: 17	good joke mate...i said that is posted for free ...on pm i can said where

18/05/2015, 07h58	#10
Pierre Shelly Débutant Date d'inscription: octobre 2014 Localisation: France,BENESSE MAREMNE, Messages: 24 Thanks: 0 Thanked 12 Times in 4 Posts Pouvoir de réputation: 0	Hello, can you tell me what kind of the k-line problem of your kess v2? I guess I may can help you.