si vous avez été banni pour une raison de spam sur le forum (hacked account) c'est parce que votre compte a été utilisé par des Bots, merci d'envoyer un message via le formulaire de contact en bas de cette page afin de récupérer votre compte, les messages/discussions supprimés ne seront malheureusement pas restaurés.

cairo_gsm · 16/06/2013, 05h49

Hi, I change my car ECU to used one bosch 06f 906 056 this ECU was used on bora 2005 automatic car, my car caddy life 2011 manual , how I can decode this ECU to work with manual transmitter as I have many problems for this , thnx

cairo_gsm · 16/06/2013, 06h16

by the way I can easy read the EEPROM from this ECU if this can help

Daniulis · 19/11/2013, 07h24

Post part number of the original one, then I could tell you are they fit each other.

dib47 · 25/02/2014, 11h14

What was wrong with the original ecu ??
Can you pull original dump & flash from original to put in new ecu ?
If this doen't work then ecu is not compatable

majo · 26/02/2014, 19h12

you can use otockeck soft to read code

MadPilot · 19/03/2014, 09h51

Recoding ECU needed. I useing VCDS. Read coding in old ECU and write to new.

fifii69 · 02/04/2015, 10h44

You have a few different way to do it, you can desolder eeprom+flash , you can clone it use bdm , you can do adaptation in vcds, those all way will work only if ECUs hardware are same...

westmanpt · 23/05/2015, 15h16

dont think a 2005 ecu will be same as 2011... as long they apear similar i really dont think hardware will be the same. what is the real problem with your caddy's ecu?

markello · 24/05/2015, 16h25

Agree with @Westmanpt@ ECU will not be the same

pecirepi · 19/06/2015, 10h57

you have few options.
to check ecu type edc16u1, u31 ...
if same type of ecu then you have options to make clone of your ecu to new used ecu, with this option you will solve all problems with coding and other stuff. but for this option you need to have tool which can clone that type of ecu.
next thing is to send here eeprom from old ecu and new ecu, so we can check ecus.
third thing is to disable immo in eeprom and to use vcds and to read original codings from old ecu and to recode new ecu with original numbers.

it is up to you to decide and to told us what kind of tools you have so we can help you.

piranha-- · 17/10/2015, 08h43

05-11 ecu will be cpmpletly different.

did ypu try code with vcds?

simon932 · 21/10/2015, 10h06

Buy the correct driver (year) and re-code VCDS ;)

carpin · 24/10/2015, 14h49

Citation:

Envoyé par simon932

Buy the correct driver (year) and re-code VCDS ;)

cairo_gsm has to buy the vcds or vag com profesional tool

And this message is very old

16/06/2013, 05h49	#1
cairo_gsm Membre Non Confirmé Date d'inscription: juin 2013 Localisation: Egypt Messages: 2 Thanks: 0 Thanked 2 Times in 2 Posts Pouvoir de réputation: 0	ECU code Hi, I change my car ECU to used one bosch 06f 906 056 this ECU was used on bora 2005 automatic car, my car caddy life 2011 manual , how I can decode this ECU to work with manual transmitter as I have many problems for this , thnx

19/06/2015, 10h57	#10
pecirepi Débutant Date d'inscription: novembre 2008 Localisation: Bosnia & Herzegovina Âge: 41 Messages: 20 Thanks: 5 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	you have few options. to check ecu type edc16u1, u31 ... if same type of ecu then you have options to make clone of your ecu to new used ecu, with this option you will solve all problems with coding and other stuff. but for this option you need to have tool which can clone that type of ecu. next thing is to send here eeprom from old ecu and new ecu, so we can check ecus. third thing is to disable immo in eeprom and to use vcds and to read original codings from old ecu and to recode new ecu with original numbers. it is up to you to decide and to told us what kind of tools you have so we can help you. __________________ Ivan Pecirep

16/06/2013, 06h16	#2
cairo_gsm Membre Non Confirmé Date d'inscription: juin 2013 Localisation: Egypt Messages: 2 Thanks: 0 Thanked 2 Times in 2 Posts Pouvoir de réputation: 0	by the way I can easy read the EEPROM from this ECU if this can help

19/11/2013, 07h24	#3
Daniulis Membre Non Confirmé Date d'inscription: novembre 2013 Localisation: Ireland, Dublin Messages: 6 Thanks: 0 Thanked 1 Time in 1 Post Pouvoir de réputation: 0	Post part number of the original one, then I could tell you are they fit each other.

25/02/2014, 11h14	#4
dib47 Membre Non Confirmé Date d'inscription: février 2014 Localisation: uk, bristol Messages: 3 Thanks: 1 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	What was wrong with the original ecu ?? Can you pull original dump & flash from original to put in new ecu ? If this doen't work then ecu is not compatable

26/02/2014, 19h12	#5
majo Membre Non Confirmé Date d'inscription: février 2014 Localisation: paris Messages: 4 Thanks: 1 Thanked 1 Time in 1 Post Pouvoir de réputation: 0	you can use otockeck soft to read code

19/03/2014, 09h51	#6
MadPilot Membre Non Confirmé Date d'inscription: mars 2014 Localisation: Koenig Russia Messages: 4 Thanks: 4 Thanked 11 Times in 2 Posts Pouvoir de réputation: 0	Recoding ECU needed. I useing VCDS. Read coding in old ECU and write to new.

02/04/2015, 10h44	#7
fifii69 Débutant Date d'inscription: mai 2014 Localisation: UK Messages: 17 Thanks: 12 Thanked 21 Times in 10 Posts Pouvoir de réputation: 0	You have a few different way to do it, you can desolder eeprom+flash , you can clone it use bdm , you can do adaptation in vcds, those all way will work only if ECUs hardware are same...

23/05/2015, 15h16	#8
westmanpt Débutant Date d'inscription: janvier 2015 Localisation: Coimbra, Portugal Messages: 13 Thanks: 2 Thanked 21 Times in 6 Posts Pouvoir de réputation: 0	dont think a 2005 ecu will be same as 2011... as long they apear similar i really dont think hardware will be the same. what is the real problem with your caddy's ecu?

24/05/2015, 16h25	#9
markello Membre Non Confirmé Date d'inscription: mai 2015 Localisation: dublin Messages: 3 Thanks: 5 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	Agree with @Westmanpt@ ECU will not be the same

17/10/2015, 08h43	#11
piranha-- Membre Non Confirmé Date d'inscription: octobre 2015 Localisation: Lija, Malta Messages: 3 Thanks: 0 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	05-11 ecu will be cpmpletly different. did ypu try code with vcds?

21/10/2015, 10h06	#12
simon932 Membre Non Confirmé Date d'inscription: octobre 2015 Localisation: Poland/Krakow Messages: 5 Thanks: 0 Thanked 0 Times in 0 Posts Pouvoir de réputation: 0	Buy the correct driver (year) and re-code VCDS ;)