Tlemcen Car electronics - Afficher un message - Electrovalve replacement and software update AL4

Simple · 05/09/2015, 10h51

I received the two Solenoids I ordered from China, one has marks and scratches as if it was not new, the other has the plastic broken and the connecter pin bent!!! Decided not to risk using them and to return them.

However, I came across a Malaysian site where a couple of users had problems identical to mine, they solved theirs by flushing the oil and over filling by 0.5 liter.

So, whilst I am communicating with another source for the 2574.16, I decided to flush the oil again, but this time I added half a liter more than the level...

Well, I am astounded..!! it has worked.. the gear is no longer failing and I don't need to change the solenoid.

05/09/2015, 10h51	#8
Simple Membre attaché Date d'inscription: août 2014 Localisation: NA Messages: 279 Thanks: 5 Thanked 414 Times in 80 Posts Pouvoir de réputation: 20	I received the two Solenoids I ordered from China, one has marks and scratches as if it was not new, the other has the plastic broken and the connecter pin bent!!! Decided not to risk using them and to return them. However, I came across a Malaysian site where a couple of users had problems identical to mine, they solved theirs by flushing the oil and over filling by 0.5 liter. So, whilst I am communicating with another source for the 2574.16, I decided to flush the oil again, but this time I added half a liter more than the level... Well, I am astounded..!! it has worked.. the gear is no longer failing and I don't need to change the solenoid.