Hello again,
I have uploaded two Gearbox fault images recorded by Lexia interface:
1- Temporary fault, Pressure regulation (difference / setting). gearboxfault_1.jpg
This is the regular fault I used to receive, before the oil change. You will notice that this fault at temperature 56C, this is the highest it has happened, it usually happens between 20 - 35 degrees.
2- Temporary fault, One-touch control signal. gearboxfault_2.jpg
This is immediately after the oil change and overfilling by 0.45 Liter. It is the first time for this error to appears. It has happened when I kicked down (accelerator to the floor). I assume this is either because I overfilled or the oil was full of bubbles and has not settled yet. The second day I removed all the excess oil and overfilled by only 250 ml (0.25 liter), and tried to replicate the error but it never occurred again.
|